P.S. Free & New JN0-364 dumps are available on Google Drive shared by TorrentExam: https://drive.google.com/open?id=1xA-nK-ULPEwCXdKg0XbPJZkUSnYXy3m6
The JN0-364 practice test software provides you the assistance to self-assess your progress. It helps you analyze the gradual improvement and notice the shortcomings while preparing Juniper JN0-364 through this format. The ability to customize your Juniper JN0-364 Practice Test time and the types of Juniper JN0-364 questions will turn your preparation into an easy affair.
| Section | Weight | Objectives |
|---|---|---|
| Intermediate System to Intermediate System (IS-IS) | 10-15% | - PDUs and TLVs - Adjacencies and levels - Configuration and monitoring - Metrics and wide metrics |
| Multiprotocol Label Switching (MPLS) | 12-18% | - Labels and LIB - Terminology and forwarding - Segment routing basics - LDP and RSVP - Configuration and monitoring |
| Open Shortest Path First (OSPF) | 15-20% | - LSA types and operation - Link-state database - Areas and router types - Configuration and troubleshooting |
| IPv6 | 8-12% | - Address types and format - Autoconfiguration - Static and dynamic routing - OSPFv3 and BGP for IPv6 |
| Spanning Tree Protocols | 8-12% | - Configuration and convergence - BPDU and protection features - STP, RSTP, MSTP, VSTP - Port roles and states |
| Border Gateway Protocol (BGP) | 20-25% | - IBGP and EBGP - Basic operation and message types - Configuration and troubleshooting - Policy and route filtering - Path selection and attributes |
| Tunnels | 5-8% | - GRE and IP-IP tunnels - Tunnel configuration and usage |
| Layer 2 Bridging and VLANs | 8-12% | - Service provider switching features - Bridging concepts - VLANs and trunking |
| Protocol-Independent Routing | 10-15% | - Static, aggregate, and generated routes - Routing instances and RIB groups - Load balancing - Martian addresses - Filter-based forwarding |
| High Availability | 5-8% | - NSR and GRES concepts - Nonstop active routing - Graceful restart |
The Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) practice questions give you a feeling of a real exam which boost confidence. Practice under real Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam situations is an excellent way to learn more about the complexity of the Juniper JN0-364 Exam Dumps. You can learn from your Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) practice test mistakes and overcome them before the actual JN0-364 exam.
NEW QUESTION # 95
You are implementing traffic engineering in your MPLS network. You must ensure that the MPLS routes are used to traverse your network. Your solution should not affect IGP routes in your route tables.
In this scenario, which traffic engineering setting will accomplish this behavior?
Answer: D
Explanation:
To ensure that MPLS traffic-engineered routes are used without affecting IGP routes in the route tables, the mpls-forwarding traffic engineering setting should be used. This setting allows MPLS to influence forwarding without changing the IGP route selection.
NEW QUESTION # 96
Click the Exhibit button. You have a network often routers that have all been configured with an identical SRGB. The exhibit shows the IS-IS configuration from a router called R10. The other nine routers do not yet have an IPv4 shortest-path SR-MPLS LSP to this router.
Which missing part of the configuration must you add on R10 to solve this problem?
Answer: C
Explanation:
For other routers to build an IPv4 shortest-path SR-MPLS LSP to R10, R10 must advertise a reachable SR node segment for its IPv4 loopback/prefix. Configuring an explicit IPv4 node SID ensures R10's loopback prefix is associated with a SID in the SRGB and is advertised in IS-IS, allowing the rest of the network to compute and label-switch traffic to R10 using SR.
NEW QUESTION # 97
Exhibit:
Referring to the exhibit, R1 is advertising prefix 203.0.113.0/24 to R2 over EBGP. R2 is configured to advertise this prefix into IBGP. R3 receives the 203.0.113.0/24 route, however the route is hidden.
Which configuration statement do you need to add to R2 to solve this problem?
Answer: A
Explanation:
In Juniper Networks Junos OS, a "hidden" route in the BGP table typically signifies that the router has received the prefix but cannot install it into the active routing table because theBGP next hop is unreachable
. This is a common occurrence in service provider environments when transitioning betweenExternal BGP (EBGP)andInternal BGP (IBGP).
According to Juniper technical documentation, when an EBGP speaker (R1) advertises a prefix to its peer (R2), it sets the next hop to its own interface IP address ($172.16.10.1$). By default, when R2 re-advertises that prefix to its IBGP peer (R3), itpreserves the original EBGP next-hop address. Unless R3 has a specific route in its Interior Gateway Protocol (IGP) or a static route to reach the $172.16.10.1$ subnet, it will mark the route as unusable (hidden).
In the exhibit, the show route output onR3explicitly shows the nexthop for $203.0.113.0/24$ as
$172.16.10.1$. Since this route is marked "hidden," we can conclude R3 does not know how to reach R2's external peering link. To resolve this, the network administrator must modify the next-hop attribute before the route is sent to R3.
By adding the statementset policy-options policy-statement export-to-ibgp then next-hop self(Option B) on routerR2, R2 will replace the external next-hop ($172.16.10.1$) with its own internal peering address ($172.16.20.1$) before advertising the route to R3. Because R3 already has a direct or IGP connection to R2's internal address, it will successfully resolve the next hop, and the route will transition from "hidden" to
"active."
Option A is unnecessary because the route is already being exported; Option C is redundant as the policy is already applied to the IBGP group; and Option D changes path preference but does not solve the underlying reachability problem.
NEW QUESTION # 98
Which IS-IS adjacency state indicates that hello packets have been exchanged but the adjacency is not yet fully established?
Answer: D
Explanation:
In theIS-IS (Intermediate System to Intermediate System)protocol, the process of forming an adjacency between two neighbors follows a specific sequence of states. While OSPF uses states like "Init," "Two-Way," and "Full," IS-IS uses a slightly different nomenclature within its state machine.
According to Juniper Networks technical documentation, when a router first sends anIS-IS Hello (IIH) PDU and receives one back from a neighbor, but has not yet confirmed that the neighbor "sees" it back, the adjacency enters theInitializingstate. Specifically, on a point-to-point link, the state transitions fromDownto Initializingas soon as the first PDU is received. On a broadcast network (like Ethernet), the Initializing state indicates that the local router has received a Hello PDU from the neighbor, but the local router's own System ID is not yet listed in the neighbor's list of "seen" neighbors (the neighbor's Hello PDU does not yet contain the local router's MAC address).
The adjacency only moves to theUpstate (Option C) once bi-directional communication is confirmed- meaning both routers have seen each other's System IDs in the incoming Hello PDUs.
Why other options are incorrect:
* Loading (Option A):This is an OSPF state, not an IS-IS state. In IS-IS, database synchronization happens after the adjacency is Up.
* Two-Way (Option D):While functionally similar to the state IS-IS is achieving, "Two-Way" is the specific terminology for OSPF. In IS-IS, the intermediate step between knowing a neighbor exists and having a fully functional adjacency is strictly calledInitializing.
NEW QUESTION # 99
You are deploying an MC-LAG connection at the edge of your network to a new customer. This solution must ensure that traffic uses all available links when forwarding traffic between the two networks.
In this scenario, which two statements are correct? (Choose two.)
Answer: A,B
NEW QUESTION # 100
......
In the PDF version, TorrentExam have included real JN0-364 exam questions. All the Selling Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam questionnaires are readable via laptops, tablets, and smartphones. Juniper JN0-364 exam questions in this document are printable as well. You can carry this file of Juniper JN0-364 PDF Questions anywhere you want. In the same way, TorrentExam update its Selling Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam questions bank in the PDF version so users get the latest material for JN0-364 exam preparation.
JN0-364 Cert Guide: https://www.torrentexam.com/JN0-364-exam-latest-torrent.html
What's more, part of that TorrentExam JN0-364 dumps now are free: https://drive.google.com/open?id=1xA-nK-ULPEwCXdKg0XbPJZkUSnYXy3m6