Auf die Prüfung International Code Council 93-Tall-Mass-Timber-Buildings zu vorbereiten brauchen Sie ein großer Stapel Bücher nicht. An dem Schulungskurs geldaufwendig zu teilnehmen, brauchen Sie auch gar nicht. Mit die Software unserer DeutschPrüfung können Sie das Ziel erreichen! Unsere Produkte können nicht nur die Stresse der Vorbereitung der International Code Council 93-Tall-Mass-Timber-Buildings Prüfung erleichtern, sondern auch die Sorge der Geldverschwendung beseitigen. Da wir versprechen, falls Sie die International Code Council 93-Tall-Mass-Timber-Buildings nach dem Kauf der International Code Council 93-Tall-Mass-Timber-Buildings Prüfungsunterlagen nicht bei der ersten Probe bestehen, bieten wir Ihnen volle Rückerstattung. Lassen Sie beruhigt kaufen!
| Section | Objectives |
|---|---|
| Tall Mass Timber Building Code Provisions | - Fire Safety and Fire Resistance
- Type IV Construction
|
>> 93-Tall-Mass-Timber-Buildings PDF <<
Die Produkte von DeutschPrüfung sind von guter Qualität. Sie sind am schnellsten aktualisiert. Wenn Sie die Schulungsunterlagen zur International Code Council 93-Tall-Mass-Timber-Buildings Zertifizierungsprüfung kaufen, können Sie die International Code Council 93-Tall-Mass-Timber-Buildings Zertifizierungsprüfung sicher bestehen.
19. Frage
Refer to the figure by clicking on the EXHIBIT button above.
The exterior wall section shown in the Figure provides the prescribed noncombustible protection required by which Construction Type?
Antwort: D
Begründung:
The illustrated wall corresponds to Type IV-A construction , making option A correct. The key indicator is the extensive Type X gypsum protection provided on the interior face of the CLT wall. Figure 63 shows multiple layers of 5/8-inch Type X gypsum board protecting the interior mass timber, together with the required exterior-side protection.
Type IV-A is the most comprehensively protected of the three tall mass timber construction classifications.
IBC Section 602.4.1.2 requires the interior faces of all mass timber elements , including the inside face of exterior mass timber walls, to be protected with qualifying noncombustible material. Section 602.4.1.2.1 requires the protection contribution to satisfy Table 722.7.1(1) and never be less than 80 minutes. Type IV-A exterior walls also require at least 40 minutes of noncombustible protection on the outside face.
The three interior layers shown are consistent with a heavily protected Type IV-A rated wall. By contrast, Type IV-B permits limited exposed interior mass timber, while Type IV-C expressly permits mass timber interior elements to remain unprotected. Type IV-HT operates under fundamentally different heavy-timber provisions.
References/Topics: 2021 IBC Sections 602.4.1.1, 602.4.1.2 and 602.4.1.2.1; Tables 601 and 722.7.1(1)-(2).
20. Frage
When Type X gypsum board is used as noncombustible protection over mass timber on the building ' s exterior walls, which of the following fasteners are permitted?
Antwort: C
Begründung:
Option A reproduces one of the two permitted exterior gypsum-board fastening methods in 2021 IBC Section
722.7.2.2. Type X gypsum board used as noncombustible protection on the exterior side of mass timber walls may be attached using galvanized nails of minimum 12 gage with a 7/16-inch head and sufficient length to penetrate the mass timber at least 1 inch .
The code also permits ASTM C1002 Type S, W, or G screws, but those screws must likewise penetrate the mass timber a minimum of 1 inch . Options C and D are therefore incorrect because they specify only 3/4- inch and 7/8-inch penetration, respectively. Option B is incorrect because it substitutes 16-gage nails for the minimum 12-gage requirement.
Section 722.7.2.2 additionally requires exterior Type X gypsum-board layers to be fastened 12 inches on center each way and 6 inches on center at joints or ends. Panel-edge fasteners must be located at least 1 inch and not more than 2 inches from the edge.
These fastening details are part of the conditions necessary to claim the protection contribution in Table
722.7.1(2).
References/Topics: 2021 IBC Sections 722.7.1 and 722.7.2.2; exterior Type X gypsum-board protection.
21. Frage
For a sprinklered Business Occupancy (Group B) in a 15-story building of Type IV-A construction, the maximum allowable building area is:
Antwort: B
Begründung:
The calculation begins with 2021 IBC Table 506.2. Because the building is a Group B occupancy, has more than one story, and is protected throughout by an automatic sprinkler system complying with Section
903.3.1.1, the applicable tabular classification is "SM"-a multistory, fully sprinklered building.
For Group B and Type IV-A construction, Table 506.2 assigns an SM allowable area factor of 324,000 square feet. However, this is not the final total allowable building area. Section 506.2.1 requires a single-occupancy building with more than three stories above grade plane to use Equation 5-2. Where no frontage increase is stated, the calculation is:
324,000 square feet × 3 = 972,000 square feet.
The story-area multiplier is limited to three even though the building contains 15 stories. The code does not permit multiplying 324,000 square feet by all 15 stories. Additionally, the actual area of an individual story cannot exceed its calculated allowable area. Option A represents a different construction-type area factor, while option B does not result from the required IBC multistory calculation. The building is not automatically unlimited merely because it is Type IV-A and sprinklered.
References/Topics: 2021 IBC Sections 506.2 and 506.2.1; Equation 5-2; Table 506.2, Group B, Type IV-A, SM area factor.
22. Frage
Sealants used to resist passage of air in construction Type IV-A, shall be in accordance with which of the following standards?
Antwort: B
23. Frage
The International Building Code requires cross-laminated timber (CLT) to be manufactured and identified in accordance with which standard?
Antwort: D
Begründung:
The governing standard is ANSI/APA PRG 320, Standard for Performance-Rated Cross-Laminated Timber.
Therefore, option A is correct. The 2021 IBC requires structural glued cross-laminated timber to be manufactured and identified in accordance with PRG 320, and Type IV provisions require CLT to bear a label demonstrating conformity with that standard.
PRG 320 addresses essential manufacturing and qualification requirements, including panel construction, layup, structural performance, adhesive qualification, dimensional tolerances, product marking and quality assurance. Product identification is particularly important to the special inspector because visual similarity alone does not establish that a panel is code compliant.
DOC PS 2 applies primarily to wood structural panels such as plywood and oriented strand board and is not the manufacturing standard for CLT. ANSI/AITC or ANSI/APA A190.1 applies to structural glued-laminated timber, commonly called glulam. ASTM D5055 covers the establishment and monitoring of structural capacities for prefabricated wood I-joists.
The inspector should verify that CLT panels retain legible identification and that the manufacturer, grade, layup and panel designation correspond to the approved construction documents.
References/Topics: 2021 IBC Sections 602.4 and 2303.1.4; Chapter 35; ANSI/APA PRG 320-2019.
24. Frage
......
Die Ausbildungsmaterialien zur International Code Council 93-Tall-Mass-Timber-Buildings Zertifizierungsprüfung aus DeutschPrüfung sind nicht nur der Grundstein auf dem Weg zu Ihrem Erfolg, sie können Ihnen auch dabei helfen, Ihre Fähigkeiten in der IT-Branche effektiver zu entfalten. Nach mehrjährigen Bemühungen beträgt die Hit-Rate von International Code Council 93-Tall-Mass-Timber-Buildings Zertifizierungsprüfung von DeutschPrüfung bereits 100%. Wenn Sie die Zertifizierungsprüfung nicht bestehen, nachdem Sie unsere Fragenpool gekauft haben, werden wir alle Ihre bezahlten Summe zurückgeben.
93-Tall-Mass-Timber-Buildings Quizfragen Und Antworten: https://www.deutschpruefung.com/93-Tall-Mass-Timber-Buildings-deutsch-pruefungsfragen.html