What's more, part of that EduDump VNX301 dumps now are free: https://drive.google.com/open?id=1W22pxbzFUsVnEbPy7cDvXSVcGr-emoLp
Once our professionals find the relevent knowledge on the VNX301 exam questions, then the whole research groups will pick out the knowledge points according to the test syllabus. Also, they will also compile some questions about the VNX301 practice materials in terms of their experience. Now, we have successfully summarized all knowledge points in line with the VNX301 outline. And meanwhile, we keep a close eye on the changes of the exam to make sure what you buy are the latest and valid.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
>> VNX301 Reliable Study Questions <<
Add EduDump's products to cart now! You will have 100% confidence to participate in the exam and disposably pass Versa Networks Certification VNX301 Exam. At last, you will not regret your choice.
NEW QUESTION # 49
Examine the exhibit below.
As an administrator of a Versa Secure SD-WAN, you are asked to find the current bandwidth of each WAN circuit used for SD-WAN connectivity in a branch, but the Director is not displaying any information for the WAN circuits.
In this scenario, what should be done to get the graph populated for all WAN circuits?
Answer: D
Explanation:
The correct answer is B . The exhibit shows the branch interface summary in Versa Director with a Live Data column. To populate real-time bandwidth graphs for WAN circuits, the administrator must select Live Data for the WAN interfaces that need to be monitored. Versa monitoring documentation states that, from a Director node, you can monitor VOS devices and organizations, and that Director, together with Versa Analytics, can poll VOS devices in real time to understand what is happening on the devices. This real-time information can be displayed to assist with troubleshooting.
Because the question asks for the current bandwidth of each WAN circuit, historical analytics alone is not sufficient. The dashboard must poll live statistics from the selected WAN circuits. In the exhibit, not all WAN interfaces appear to have Live Data selected; therefore, the graph is not populated for all circuits. Refreshing the page does not enable polling and will not solve the missing data condition.
Selecting only MPLS would populate only the MPLS circuit, not all WAN circuits. Unselecting and reselecting only the INET circuit would affect only that one interface. Therefore, Live Data must be selected for all WAN circuits whose current bandwidth should be displayed.
NEW QUESTION # 50
Examine the exhibit below.
You are onboarding the SOLDEU-R2 branch device using the staging script. You cannot get a Versa- Provider-Controller-VR IP address assigned, indicating that the IPsec tunnel to the corrector has not come up.
You verified that the cables have been connected to the correct ports.
What has caused this issue?
Answer: C
Explanation:
The issue is caused by specifying the incorrect WAN port in the staging script. In the exhibit, the SOLDEU- R2 branch is physically connected to the Internet cloud through vni-0/0 , while vni-0/1 is shown as the inter- device link toward SOLDEU-R1. However, the show interfaces brief output shows that the WAN IP address
192.168.122.121/24 has been assigned to vni-0/1.0 , not to the Internet-facing interface. Since the cables are confirmed to be connected correctly, the mismatch must be in the staging script interface selection, not in the cabling.
Versa documentation states that during SD-WAN staging, the branch establishes an IKE session with the Controller, and after that the Controller assigns an IP address to the branch device. Versa troubleshooting guidance also states that after transport connectivity to the Controller is established, the branch forms IKE-based IPsec connectivity, and if this succeeds, the ptvi interface toward the Controller comes up. If IKE/IPsec fails, the ptvi interface remains down. Because the staged WAN IP is placed on the wrong VNI interface, the branch cannot reach the Controller over the intended Internet transport, so the Controller tunnel does not come up.
NEW QUESTION # 51
While troubleshooting the SD-WAN data path, you run show vsf tunnel access-circuits ... detail and see the following encapsulation chain: VMLH, MPLS-over-GRE, IPsec-ESP, and VXLAN. What does this output primarily confirm?
Answer: B
Explanation:
The correct answer is B . Versa's SD-WAN data-path troubleshooting documentation shows that show vsf tunnel access-circuits ... detail can display the access-circuit state and encapsulation chain used for tunnel forwarding. In the example, the output lists multiple encapsulations, including VMLH , MPLS-over-GRE , IPsec-ESP , and VXLAN . It also shows transport details such as source IP, destination IP, UDP transport, tunnel MTU, SPI values, and SLA state.
This confirms that the VOS data plane has built the SD-WAN tunnel encapsulation stack required to forward overlay traffic across the underlay. IPsec-ESP in the chain indicates encrypted tunnel handling, while VXLAN and other encapsulation components are part of the SD-WAN overlay forwarding structure.
The output does not indicate simple bridging, plain-text-only GRE, or bypass of the VOS data plane.
Instead, it proves that the packet path is being processed through the VOS tunnel forwarding framework and that the administrator is looking at the SD-WAN access-circuit tunnel state.
NEW QUESTION # 52
A branch device is stuck after staging. The Controller does not show the expected branch lifecycle notification. Which statement best describes the role of MP-BGP in the provider organization for this process?
Answer: A
NEW QUESTION # 53
Examine the CLI output in the exhibit.
You are reviewing the OSPF adjacency on a VOS CPE, and the output is shown in the exhibit. In this scenario, what is the probable cause of the OSPF adjacency issue?
Answer: A
Explanation:
The correct answer is B . The exhibit shows the OSPF neighbor in the exst state, which means Exchange Start . Versa documentation lists the OSPF neighbor state codes and identifies exst as "exchange start," followed by exchange, loading, and full. In normal OSPF adjacency formation, neighbors progress through initialization and two-way communication before they negotiate database exchange. If the neighbor becomes stuck in ExStart or Exchange, a common and highly probable cause is an MTU mismatch between the two OSPF peers. During database description packet negotiation, the peers must agree on parameters that allow LSDB exchange; an MTU mismatch can prevent the adjacency from advancing to Full.
Option A is less likely because an area mismatch usually prevents the neighbor relationship from forming correctly rather than leaving it stuck in ExStart. Option C is also incorrect because the neighbor has already progressed beyond early states, which indicates that bidirectional communication has occurred. Option D is not the best answer because dropping OSPF multicast 224.0.0.5 would typically prevent discovery or keep the adjacency in an earlier state, not specifically in ExStart.
Therefore, the probable cause is an interface MTU mismatch.
NEW QUESTION # 54
......
Preparing for the Versa Certified SD-WAN Specialist (VNX300) (VNX301) certification exam can be time-consuming and expensive. That's why we guarantee that our customers will pass the prepare for your Versa Certified SD-WAN Specialist (VNX300) (VNX301) exam on the first attempt by using our product. By providing this guarantee, we save our customers both time and money, making our VNX301 Practice material a wise investment in their career development.
Flexible VNX301 Testing Engine: https://www.edudump.com/exams/Versa-Networks/VNX301/
P.S. Free 2026 Versa Networks VNX301 dumps are available on Google Drive shared by EduDump: https://drive.google.com/open?id=1W22pxbzFUsVnEbPy7cDvXSVcGr-emoLp