P.S. Free & New VNX301 dumps are available on Google Drive shared by Prep4pass: https://drive.google.com/open?id=1Cv6ITZCs-DqoxkqOb0U7mlzcKw5hTK6f
Business Applications VNX301 certification exam with our braindumps, just send us your failed score report. After we confirm your VNX301 score report and we can give full refund of the VNX301 Exam to you in time. Meanwhile, if you also need to take other related exams you also can choose another exam instead of the failed exam.
| Section | Weight | Objectives |
|---|---|---|
| Versa SD-WAN Infrastructure | 20% | - Versa Director components and functions - Versa Controller and Analytics - Edge device management and deployment |
| SD-WAN Services and Policies | 15% | - QoS and bandwidth management - Application steering and traffic policies - SLA monitoring and link optimization |
| Network Topologies and Routing | 15% | - High availability and redundancy - Hub-and-spoke, full-mesh, hybrid topologies - Routing protocols and path selection |
| Security Services | 10% | - Integrated firewall and IPS - Segmentation and threat protection - VPN and encryption |
| Operations and Troubleshooting | 5% | - Diagnostics and problem resolution - Monitoring and logging |
| Configuration and Provisioning | 15% | - Template-based configuration - Zero-touch provisioning - Service deployment and onboarding |
| Underlay and Overlay Technologies | 20% | - Overlay connectivity and tunneling - Overlay architecture and concepts - Underlay network design and requirements |
Work hard and practice with our Versa Networks VNX301 dumps till you are confident to pass the Versa Networks VNX301 exam. And that too with flying colors and achieving the Versa Networks VNX301 Certification on the first attempt. You will identify both your strengths and shortcomings when you utilize VNX301 practice exam software (desktop and web-based).
NEW QUESTION # 40
You want to ensure that devices in your branch sites cannot source traffic from IP addresses that are not assigned to the branch sites. What will solve this problem?
Answer: D
Explanation:
The correct answer is B . The requirement is to stop branch devices from sourcing traffic using IP addresses that do not belong to the branch. This is a source-address enforcement problem, so the correct control is a stateful firewall policy that permits only traffic whose source IP address matches the valid branch LAN prefix or branch-assigned address range. Versa's stateful firewall configuration documentation explains that firewall policy rules include source matching, where the administrator selects the source zone and one or more source addresses to which the rule applies.
By creating an allow rule for the legitimate branch source prefixes and placing a deny rule for all other sources from the branch LAN zone, the VOS device prevents spoofed or unauthorized source addresses from leaving the branch. This is consistent with Versa security policy behavior, where firewall rules evaluate traffic based on zones, addresses, services, applications, and other match criteria. Captive portal verifies user identity but does not directly prevent IP spoofing. An IP filter profile based on applications does not ensure the source address belongs to the branch. Option D is incorrect because allowing traffic to the assigned LAN range controls destination traffic, while this requirement is about validating the source IP address of outbound branch traffic.
NEW QUESTION # 41
Examine the exhibit below.
You are onboarding the SOLDEU-R2 branch device using the staging script. You cannot get a Versa- Provider-Controller-VR IP address assigned, indicating that the IPsec tunnel to the corrector has not come up.
You verified that the cables have been connected to the correct ports.
What has caused this issue?
Answer: D
Explanation:
The issue is caused by specifying the incorrect WAN port in the staging script. In the exhibit, the SOLDEU- R2 branch is physically connected to the Internet cloud through vni-0/0 , while vni-0/1 is shown as the inter- device link toward SOLDEU-R1. However, the show interfaces brief output shows that the WAN IP address
192.168.122.121/24 has been assigned to vni-0/1.0 , not to the Internet-facing interface. Since the cables are confirmed to be connected correctly, the mismatch must be in the staging script interface selection, not in the cabling.
Versa documentation states that during SD-WAN staging, the branch establishes an IKE session with the Controller, and after that the Controller assigns an IP address to the branch device. Versa troubleshooting guidance also states that after transport connectivity to the Controller is established, the branch forms IKE-based IPsec connectivity, and if this succeeds, the ptvi interface toward the Controller comes up. If IKE/IPsec fails, the ptvi interface remains down. Because the staged WAN IP is placed on the wrong VNI interface, the branch cannot reach the Controller over the intended Internet transport, so the Controller tunnel does not come up.
NEW QUESTION # 42
As an administrator, you are migrating your legacy WAN to Versa Secure SD-WAN without changing the underlay network. You need to ensure that, during the migration process, legacy WAN sites are allowed to communicate with SD-WAN branches. Which two steps should be implemented to accomplish this task?
(Choose two.)
Answer: C,D
Explanation:
The correct answers are B and C . During a migration from a legacy WAN, such as MPLS Layer 3 VPN, to Versa Secure SD-WAN, an SD-WAN gateway is used to allow communication between SD-WAN-enabled branches and legacy WAN sites. Versa SD-WAN design guidance states that an SD-WAN gateway allows sites connected to the SD-WAN VPN network to communicate with sites connected to a legacy MPLS VPN network. It also explains that this gateway facilitates route exchange between the MPLS underlay network and the SD-WAN VPN network, typically using a dynamic routing protocol such as BGP.
For this design, the hub or gateway must be configured with the Gateway option for the underlay transport so it can act as the interconnect point between the legacy and SD-WAN domains. Versa documentation further describes configuring a BGP peering session on the MPLS transport VR of the gateway to exchange routes from the MPLS provider to the SD-WAN network, and notes that Director Workflows can automate this configuration. Spoke-to-Spoke-Direct is not sufficient for legacy interconnect, and SD-WAN traffic steering policies do not advertise routes.
NEW QUESTION # 43
Examine the exhibit below.
Spoke1 and Spoke2 are part of Spoke-to-Hub-Only spoke group, the hub is advertising a default route to both the spokes.
Referring to the exhibit, which statement is true?
Answer: B
Explanation:
In Versa SD-WAN, a Spoke-to-Hub-Only topology is specifically designed for deployments where spoke branches communicate only with hub resources and not with other spokes. Versa's SD-WAN design documentation states that in a spoke-to-hub-only topology, the default behavior is that only hub routes are advertised, and spoke routes are not re-advertised by the hub branch. It also explains that this topology is used when spokes do not have to communicate with each other.
Even though the hub in the exhibit advertises a default route, that does not change the topology behavior into spoke-to-spoke communication. The default route can attract unknown traffic from the spokes toward the hub, but the Spoke-to-Hub-Only policy prevents the spoke prefixes from being redistributed or imported in a way that allows spoke-to-spoke reachability. Versa documentation further shows that spoke routes are filtered using BGP communities and import policies, and that the spoke route table contains only destinations behind the hubs, not other spoke routes.
NEW QUESTION # 44
During onboarding, Versa Director shows the first branch-connect notification for a new CPE, but no later staged branch-connect notification appears. Which troubleshooting area should be investigated first?
Answer: C
Explanation:
The correct answer is B . Versa branch lifecycle notifications are generated at different stages of onboarding.
The first notification indicates that the branch connected using factory-default configuration. After that notification, Versa Director pushes the staging configuration to the branch and requests a reboot. After rebooting with staging configuration, the branch should connect again to the Controller, and a later branch- connect notification should appear.
If this later staged connection notification does not appear, Versa's troubleshooting guidance says to debug either the data path or IPsec connectivity from the branch to the Controller. This makes sense because the branch must have working transport reachability and IKE/IPsec establishment toward the Controller before it can continue the SD-WAN lifecycle.
Analytics disk usage, LDAP authentication, and URL filtering are not part of the branch staging control path. They may affect monitoring, user identity, or security inspection after the site is operational, but they do not explain why the branch stops after the initial factory-default onboarding notification.
NEW QUESTION # 45
......
Our VNX301 exam question has been widely praised by all of our customers in many countries and our company has become the leader in this field. Our VNX301 exam questions boost varied functions and they include the self-learning and the self-assessment functions, the timing function and the function to stimulate the VNX301 Exam to make you learn efficiently and easily. There are many advantages of our VNX301 study tool. To understand the details of our VNX301 practice braindump, you can visit our website Prep4pass.
New VNX301 Test Answers: https://www.prep4pass.com/VNX301_exam-braindumps.html
BTW, DOWNLOAD part of Prep4pass VNX301 dumps from Cloud Storage: https://drive.google.com/open?id=1Cv6ITZCs-DqoxkqOb0U7mlzcKw5hTK6f