P.S. Free 2026 Huawei H19-404_V1.0 dumps are available on Google Drive shared by Real4Prep: https://drive.google.com/open?id=1F8ZOHaiPF-0ylb2l6kQWywW_LNHlQIip
We can provide absolutely high quality guarantee for our H19-404_V1.0 practice materials, for all of our Huawei H19-404_V1.0 learning materials are finalized after being approved by industry experts. Without doubt, you will get what you expect to achieve, no matter your satisfied scores or according H19-404_V1.0certification file. As long as you choose our HCSE-Presales-Campus Network Planning and Design V1.0 exam questions, you will get the most awarded.
| Section | Weight | Objectives |
|---|---|---|
| Huawei Campus Network Solutions and Products | 20% | - Switches, WLAN products and AR routers - Xinghe Intelligent Campus Solution overview - iMaster NCE-Campus management platform |
| Campus Network Planning and Design Fundamentals | 15% | - Campus network architecture and evolution - Network design principles and methodologies - Service requirements and demand analysis |
| Campus Network Technology Design | 25% | - VLAN, IP addressing and routing design - QoS, security and high availability design - WLAN planning, coverage and roaming design |
| Solution Promotion and Project Implementation | 15% | - Solution value analysis and competitive differentiation - Deployment guidance and acceptance criteria |
| Scenario-based Campus Network Design | 25% | - Cloud-managed and virtualized campus network design - Small and medium-sized campus network design - Large campus and multi-branch interconnection design |
The Real4Prep is a revolutionary platform for professionals and students looking to pass the Prepare for your HCSE-Presales-Campus Network Planning and Design V1.0 (H19-404_V1.0) exam and advance their careers. Our mission is to provide a comprehensive, convenient, and cost-effective preparation material for individuals to prepare for the H19-404_V1.0 Certification Exam.
NEW QUESTION # 36
On a campus fabric network, which of the following methods can be used for non-authenticated terminals to access a VN?
Answer: A
Explanation:
Non-authenticated terminals can access a virtual network by using statically configured VLANs. Such terminals may include printers, cameras, sensors, industrial devices, and other dumb terminals that cannot perform 802.1X, Portal, or comparable interactive authentication. Their access interfaces and service VLANs are therefore configured in advance and mapped to the required VN.
Dynamic VLAN authorization requires a completed authentication or identification process. Normally, an authentication server returns a VLAN or other authorization attribute after validating the user or terminal.
Because the question specifically refers to non-authenticated terminals, dynamically authorizing a VLAN is not the applicable mechanism. The wired-mode and wireless-mode authorization options are likewise associated with authentication-based policy delivery rather than unconditional VN access.
Huawei's VN design guidance states that LAN-side physical interfaces and VLANs are assigned to the appropriate departments or services and then associated with corresponding VRFs or VNs. It also explains that a department may use an independent physical interface or share an interface while maintaining isolation through VLANs. Therefore, configuring a static VLAN is the correct method.
NEW QUESTION # 37
Which of the following statements is false about Layer 3 roaming?
Answer: D
Explanation:
Option B is false because a station retains its original IP address during Layer 3 roaming. Preserving the IP address is essential for maintaining active application sessions when the station moves between APs associated with different service VLANs, Layer 2 domains, and gateways. Huawei's training diagram shows the same station IP address before and after roaming, while the service VLAN changes.
When the STA initially accesses the WLAN, a Home AP or HAP is selected for it. After the STA roams to a Foreign AP, the new AP obtains the station information and establishes the required forwarding relationship with the HAP. In direct-forwarding implementations, the STA's traffic is encapsulated and forwarded to the HAP, which preserves access through the original network and gateway.
Therefore, A and C accurately describe HAP-based Layer 3 roaming. Option D is also correct: the APs use the same SSID and authentication mode but different service VLANs. The station's IP address does not change, so B is the false statement.
NEW QUESTION # 38
Which of the following BGP NLRI address-family combinations is used to transmit SD-WAN tunnel encapsulation information?
Answer: C
Explanation:
AFI 1 with SAFI 74 is the correct combination. In Multiprotocol BGP, the Address Family Identifier defines the basic network-layer address family, while the Subsequent Address Family Identifier specifies how the associated NLRI is interpreted. AFI 1 represents IPv4. SAFI 74 is assigned for SD-WAN capabilities and is used to distribute information required for SD-WAN edge discovery and tunnel establishment, including transport and encapsulation-related attributes.
The other combinations represent different forms of reachability information. AFI 1/SAFI 1 is ordinary IPv4 unicast NLRI. AFI 1/SAFI 2 represents IPv4 multicast reachability. AFI 25 represents Layer 2 VPN information, while SAFI 70 represents Ethernet VPN routes; that combination is associated with EVPN rather than the specific SD-WAN capability NLRI requested.
Huawei's architecture uses BGP-based control channels to exchange transport network port information, IPsec security-association information, and service routes. These parameters allow edge devices to determine peer endpoints and create GRE or GRE-over-IPsec data channels after the relevant service routes trigger tunnel establishment.
NEW QUESTION # 39
Which of the following technologies is used for wireless attack detection?
Answer: D
Explanation:
WIPS is the correct technology because it provides wireless intrusion prevention capabilities, including detecting and containing rogue access points, rogue stations, ad hoc devices, spoofing attempts, flood attacks, and other malicious activity on the radio interface. Huawei's security-design material groups WIDS and WIPS with wireless attack detection and rogue-device containment. It recommends attack detection in public areas and primary or secondary education environments with high security requirements.
WIDS primarily detects and reports suspicious behavior, while WIPS adds active prevention or containment actions according to the configured policy. The other options serve different purposes. Mesh is a wireless networking architecture used to provide backhaul connectivity or extend coverage between APs; it is not an attack-detection mechanism. Spectrum analysis identifies non-Wi-Fi interference sources and evaluates radio- frequency utilization, but does not provide complete security attack detection and containment. Protected Management Frames protects selected 802.11 management frames against forgery, deauthentication, and disassociation attacks, but it is a protection mechanism rather than the comprehensive detection system requested. Therefore, WIPS is the correct answer.
NEW QUESTION # 40
On which public cloud can the AR6700V-L running R024C10 not be deployed?
Answer: B
Explanation:
For the R024C10 software release specified in the question, the AR6700V-L cannot be deployed on Google Cloud Platform. The supported environments represented by this release and question are Amazon Web Services, Oracle Cloud, and Microsoft Azure.
Public-cloud support for a virtual CPE is release-specific. A virtual router requires more than generic virtual- machine compatibility. Huawei must provide or validate the appropriate cloud image, virtual network- interface drivers, deployment template, bootstrap mechanism, licensing integration, resource specifications, and controller-registration process for each cloud platform. Therefore, support for one KVM- or VMware- based environment does not automatically mean that every public-cloud provider is supported.
A cloud-hosted virtual CPE enables branches to establish overlay connectivity directly with cloud workloads and allows the controller to provide unified management and policy orchestration for physical and virtual edge devices. Huawei describes this model as deploying a virtual SD-WAN router on a public cloud to implement branch-to-cloud interconnection and unified policy orchestration. Under the R024C10 compatibility matrix tested by this question, GCP is excluded. Therefore, option B is correct.
NEW QUESTION # 41
......
Our company according to the situation reform on conception, question types, designers training and so on. Our latest H19-404_V1.0 exam torrent was designed by many experts and professors. You will have the chance to learn about the demo for if you decide to use our H19-404_V1.0 quiz prep. We can sure that it is very significant for you to be aware of the different text types and how best to approach them by demo. At the same time, our H19-404_V1.0 Quiz torrent has summarized some features and rules of the cloze test to help customers successfully pass their exams. More importantly, you have the opportunity to get the demo of our latest H19-404_V1.0 exam torrent for free, yes, you read that right, and our demo is free. So why still hesitate?
Valid H19-404_V1.0 Study Materials: https://www.real4prep.com/H19-404_V1.0-exam.html
BTW, DOWNLOAD part of Real4Prep H19-404_V1.0 dumps from Cloud Storage: https://drive.google.com/open?id=1F8ZOHaiPF-0ylb2l6kQWywW_LNHlQIip