Therefore, if you have struggled for months to pass Fortinet NSEI_OTS_AR-7.6 exam, be rest assured you will pass this time with the help of our Fortinet NSEI_OTS_AR-7.6 exam dumps. Every NSEI_OTS_AR-7.6 exam candidate who has used our exam preparation material has passed the exam with flying colors. Availability in different formats is one of the advantages valued by Fortinet NSE I - OT Security 7.6 Architect exam candidates. It allows them to choose the format of Fortinet NSEI_OTS_AR-7.6 Dumps they want. They are not forced to buy one format or the other to prepare for the Fortinet NSEI_OTS_AR-7.6 exam. Dumpcollection designed Fortinet exam preparation material in Fortinet NSEI_OTS_AR-7.6 PDF and practice test (online and offline). If you prefer PDF Dumps notes or practicing on the Fortinet NSEI_OTS_AR-7.6 practice test software, use either.
| Section | Weight | Objectives |
|---|---|---|
| Monitoring and Risk Assessment | 25% | - OT-focused risk assessment and management - Event handling and logging with FortiAnalyzer 7.6 - Threat detection using FortiSIEM 7.4 |
| Asset Management | 25% | - Device detection and inventory using FortiGate & FortiNAC - Fortinet Security Fabric for OT environments - OT security standards and compliance (IEC 62443, NIST) |
| Network Security | 25% | - Virtual patching for legacy OT systems - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Security automation and threat response |
| Network Access Control | 25% | - Purdue Model and secure network segmentation - Authentication and access policies for OT devices - OT Ethernet and industrial communication models |
>> NSEI_OTS_AR-7.6 Dump Collection <<
The Dumpcollection offers latest Fortinet NSE I - OT Security 7.6 Architect NSEI_OTS_AR-7.6 exam questions and answers, with Fortinet NSEI_OTS_AR-7.6 exam practice test questions you can ace your Fortinet NSEI_OTS_AR-7.6 exam preparation simply and quickly and pass the final NSEI_OTS_AR-7.6 Exam easily. The Fortinet NSEI_OTS_AR-7.6 exam practice test questions will assist you in Fortinet NSEI_OTS_AR-7.6 exam preparation.
NEW QUESTION # 50
Refer to the exhibits.
The Playbook Monitor dashboard and the analysis of the corresponding incident analysis are shown. You created the playbook with the objective of automatically attaching the report to the incident that was created.
Which two statements are correct? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are C and D .
Option D is correct because the Playbook Monitor clearly shows the starter as On_Demand and the trigger as user(admin) . The study guide states that "ON_DEMAND: The playbook runs when an administrator manually starts it" and also notes that to run it manually, you select the playbook and click Run . This exactly matches the exhibit, so the playbook was manually triggered.
Option C is also correct. The study guide explains that "tasks run one after another" and that "if needed, the output of one task can be used by the tasks that follow it." It also gives an example where workflow logic matters, such as creating an incident and then attaching details to it. In the exhibit, the sequence shown is Attach_report , then Run_report , then Create_Incident , while the incident analysis shows no report attached . Since the report must exist and the incident must already be available before it can be attached properly, the task order is wrong and must be reordered.
Option B is incorrect because the monitor shows multiple tasks completed successfully, not only Create_Incident . Option A is not the best answer because the main problem demonstrated by the exhibits is not simply waiting time, but the incorrect workflow order. The playbook completed successfully, yet the report is still not attached, which indicates a design issue in the task sequence rather than just a delay.
NEW QUESTION # 51
During layer 2 polling , which two pieces of information are gathered by FortiNAC to identify a device?
(Choose two answers)
Answer: B,C
Explanation:
According to the OT Security 7.6 Architect study guide section on Asset Management , specifically regarding FortiNAC Visibility :
* Layer 2 Polling Data : Because each physical address is unique, FortiNAC identifies hosts as they connect to the network. The information gathered during this process fills in the physical address and location information in the database.
* Visibility Components : The guide states that the physical address learned , the time it was learned , and where it was learned from provide the foundation of endpoint visibility in the form of " what, where, and when " information. This confirms that Where it was learned (Option A) and The time it was learned (Option D) are correct.
* Exclusions :
* Layer 3 Polling : The MAC-to-IP correlation (Option B) is explicitly defined as a function of Layer 3 polling , where the correlated IP address is added to the database record for the corresponding MAC address.
* DHCP Fingerprinting : The host name or system name (Option C) and the operating system are gathered via DHCP fingerprinting , not layer 2 polling.
NEW QUESTION # 52
What is the next step if FortiGate cannot detect a device locally? (Choose one answer)
Answer: C
NEW QUESTION # 53
Refer to the exhibit.
A partial OT network is shown. In this OT network, you must add additional security measures to detect OT protocols and, therefore, increase the traffic visibility. Which security sensor must you implement to detect the OT protocols in this network? (Choose one answer)
Answer: D
Explanation:
The correct answer is C. Application sensor set to monitor on all the FortiGate devices .
The study guide clearly explains that application control is the feature used to identify OT protocols. It states that "application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" and also says "You can use application control signatures to detect OT protocols." It further shows an example where a Modbus application control profile is enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly matches the requirement in the question, which is to detect OT protocols and increase traffic visibility .
The other options do not fit the requirement as precisely. Device detection is for identifying devices and collecting endpoint information, not for detecting industrial protocols. Inline IDS and IPS are focused more on detecting or blocking attacks, exploits, protocol abnormalities, and known vulnerabilities. While IPS can inspect some OT traffic, the study guide distinguishes it from application control by stating that IPS signatures tend to detect exploits, whereas application control signatures tend to provide protocol detection at various levels . Therefore, the required security sensor for OT protocol detection and traffic visibility is the application sensor in monitor mode .
NEW QUESTION # 54
Refer to the exhibits.
A partial Basic Event Handler page on FortiAnalyzer and the creation of a trigger in a FortiGate device are shown. To improve the protection of your OT network, you want to automate the handling of compromised devices notified through FortiAnalyzer. You have configured an event handler named Alert_trigger as shown in the exhibit. When you create the trigger on the FortiGate device, the Event handler name field does not provide the Alert_trigger option. What two actions must you perform to make the Alert_trigger option available? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are C and D .
Option C is correct because the study guide explains that when "a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" and, in the Security Fabric workflow, "FortiAnalyzer parses the logs and notifies the root FortiGate." This means FortiGate must first have the FortiAnalyzer connection configured so it can consume FortiAnalyzer event handlers and use them in automation. The wizard message in the exhibit also points to this requirement by indicating that a FortiAnalyzer connection must be configured.
Option D is also correct because the study guide explicitly says that in this automation flow "the root FortiGate triggers the action" and shows "Stitches configured on root FortiGate." Therefore, if you want the FortiAnalyzer event handler to appear and be usable for automation, the trigger must be configured on the root FortiGate , not on an arbitrary downstream FortiGate.
Option A is incorrect because + Create is only a GUI control and does not solve the missing-event-handler visibility problem. Option B is not identified in the study guide as the requirement for making a FortiAnalyzer event handler available in the FortiGate automation trigger list.
NEW QUESTION # 55
......
If you have some doubts about the accuracy of NSEI_OTS_AR-7.6 top questions. There are free demo of latest exam cram for you to download. Besides, you can free updating Fortinet braindumps torrent one-year after you purchase. We adhere to the principle of No Help, Full Refund, if you failed the exam with our NSEI_OTS_AR-7.6 Valid Dumps, we will full refund you.
NSEI_OTS_AR-7.6 Valid Test Syllabus: https://www.dumpcollection.com/NSEI_OTS_AR-7.6_braindumps.html