300-110 Musterprüfungsfragen - 300-110Zertifizierung & 300-110Testfagen

Um die Cisco 300-110 Zertifizierungsprüfung zu bestehen, wählen Sie doch unseren Fast2test. Sie werden sicher nicht bereuen, dass Sie mit so wenigem Geld die Prüfung bestehen können. Unser Fast2test wird Ihnen helfen, sich auf die Prüfung gut vorzubereiten und die Cisco 300-110 Zertifizierungsprüfung (Designing Cisco Wireless Networks) erfolgreich zu bestehen. Außerdem bieten wir Ihnen kostenlos einen einjährigen Update-Service.

Cisco 300-110 Exam Syllabus Topics:

SectionWeightObjectives
Topic 1: Mobility25%- Site Tags
- Validate mobility tunneling
- Optimize client roaming
- Design mobility groups
Topic 2: Wired and Wireless Infrastructure30%- Design high-density wireless networks
- Design radio management
- Design wireless bridging (mesh)
- Physical infrastructure requirements
- Design for data, voice, video, location
- Logical infrastructure requirements
Topic 3: WLAN High Availability20%- Design controller high availability
- Design AP high availability
Topic 4: Wireless Site Survey25%- Material attenuation and its design effects
- Collect design requirements and evaluate constraints
- Post-deployment site survey
- Pre-deployment site survey
- Layer 1 site survey analysis
- Predictive site survey
- Planning tools and network metrics evaluation

>> 300-110 Fragen Antworten <<

Cisco 300-110 Online Prüfung & 300-110 Fragenkatalog

Wenn Sie Fast2test wählen, versprechen wir Ihnen eine 100%-Pass-Garantie zur Cisco 300-110 Zertifizierungsprüfung. Sonst erstatteten wir Ihnen Ihre an uns geleisteten Zahlung.

Cisco Designing Cisco Wireless Networks 300-110 Prüfungsfragen mit Lösungen (Q85-Q90):

85. Frage
A customer designs a Cisco wireless environment to provide connectivity to employees and guests. The guest SSID must be configured on three anchor WLCs named Anchor1, Anchor2, and Anchor3 in a DMZ. The guest anchor priority must be configured to ensure that Anchor1 has the highest priority. Which priority level must be incorporated in the design for Anchor1?

Antwort: D

Begründung:
In Cisco ' s guest anchor WLC deployment model, multiple anchor controllers can be configured in a DMZ to provide redundancy for guest WLAN traffic. The anchor priority value determines which anchor controller is preferred for establishing the guest mobility tunnel from the foreign WLC. Cisco ' s anchor priority system assigns the highest preference to the lowest numerical priority value. Priority 1 is the highest priority, meaning the foreign WLC will prefer Anchor1 when establishing the CAPWAP mobility tunnel for anchoring guest client traffic. Priority 2 would be assigned to Anchor2, and Priority 3 to Anchor3, creating a deterministic failover hierarchy. If Anchor1 becomes unreachable, the foreign controller automatically falls over to Anchor2, then to Anchor3. Priority 0 is not a valid anchor priority value in the Cisco WLC configuration. This design pattern is critical for enterprise guest deployments where DMZ anchor redundancy must be maintained without manual intervention. Reference: WLSD Study Guide - Guest Wireless Architecture, Anchor WLC Configuration, Mobility and DMZ Design.


86. Frage
A wireless engineer must design a backhaul link. The engineer has a mesh access point that has a wired connection back to the infrastructure. What must be changed in the AP role before a change is made in the AP mode?

Antwort: C

Begründung:
In Cisco mesh networking architecture, access points are classified into two primary roles: Root Access Points (RAP) and Mesh Access Points (MAP). A RAP is an access point that maintains a wired Ethernet backhaul connection back to the network infrastructure, while a MAP operates wirelessly, relying on mesh backlinks to upstream RAPs. When an engineer needs to change an AP mode - such as switching to bridge mode to extend the mesh - the AP role must first be defined correctly. The AP must be designated as a RAP before any mode-level configuration changes are applied. This sequencing is critical because the AP role defines the fundamental backhaul path; changing the mode without first establishing the role results in misconfiguration and potential connectivity loss. The RAP communicates directly with the wired infrastructure via its Ethernet port, making it the gateway for all downstream MAPs in the mesh topology. Options A (monitor), C (bridge), and D (local) refer to AP modes, not roles, and cannot be configured until the role is properly defined.
Reference: WLSD Study Guide - Mesh Networking Fundamentals, Outdoor Wireless Design, AP Role and Mode Configuration.


87. Frage
An engineer must design and configure a wireless network for pervasive coverage in an oil terminal, casual web and email traffic, 5 GHz. What is the best design?

Antwort: D

Begründung:
An oil terminal presents specific wireless design constraints: the requirement is pervasive coverage (maximum geographic coverage) for low-bandwidth applications (casual web and email). These requirements prioritize coverage reach over throughput optimization. The correct approach is to keep all data rates enabled, including lower rates such as 6, 9, 12, and 18 Mbps - because in an industrial environment with challenging RF propagation paths, reflective surfaces, and potential obstructions, lower data rates extend the functional coverage range of each AP. Web and email traffic does not require high data rates; even 1-6 Mbps is sufficient for these applications. Disabling rates below 54 Mbps (Option A) would dramatically shrink each AP ' s effective coverage area, requiring many more APs for pervasive coverage and failing the primary design objective. Assigning static maximum power without RRM auto-adjustment creates excessive co- channel interference. Disabling rates below 24 Mbps (Option C) still reduces coverage reach unnecessarily.
Disabling 802.11n and 802.11ac MCS rates (Option D) prevents the AP from using high-efficiency modulation for nearby clients without coverage benefit. Auto power assignment combined with all rates enabled provides the optimal balance for pervasive industrial deployment. Reference: WLSD Study Guide - Industrial WLAN Design, Coverage vs. Capacity Trade-offs, Data Rate Configuration for Pervasive Coverage.


88. Frage
A customer has a Cisco wireless network with two Cisco Catalyst 9800 Series WLCs in a high availability cluster, 50 Cisco 2800I APs, and all SSIDs and services are 5 GHz only. A security mandate requires that rogue APs be scanned and identified in 2.4 GHz and 5 GHz bands without impacting existing client connectivity. How must the wireless network be reconfigured to meet the requirement without purchasing additional APs?

Antwort: D

Begründung:
The Cisco Aironet 2800 Series APs feature a dual-radio architecture with a dedicated 5 GHz radio (slot 1) and a Flexible Radio Assignment (XOR) radio (slot 0) that can operate in either 2.4 GHz or 5 GHz, or be assigned to monitor mode for scanning functions. Since all existing SSIDs and services are 5 GHz only, the slot 1 (dedicated 5 GHz) radio is responsible for all current client connectivity - it must remain in Client Serving mode to maintain uninterrupted 5 GHz WLAN service. The XOR radio (slot 0), currently either idle or operating as a secondary 5 GHz radio, can be repurposed without impacting client service. Setting the XOR radio to Monitor mode enables it to continuously scan all channels across both the 2.4 GHz and 5 GHz spectrum for rogue AP detection, using the embedded CleanAir and WIDS capabilities. In Monitor mode, the XOR radio operates full-time as a dedicated scanner, providing rogue detection coverage on 2.4 GHz (previously uncovered since all services were 5 GHz) and supplementary scanning on 5 GHz. This eliminates the need for additional dedicated monitor mode APs. Options A, C, and D either place the slot 1 radio in a non-client-serving role (disrupting existing connectivity) or use the inappropriate Sniffer mode instead of Monitor mode for rogue detection. Reference: WLSD Study Guide - Cisco 2800 XOR Radio Architecture, Monitor Mode for Rogue Detection, Flexible Radio Assignment, WIDS Design.


89. Frage
A customer has two Cisco Catalyst 9800 Series WLCs named WLC-A and WLC-B in an N+1 configuration with the same WLANs but different Layer 3 interfaces for each WLC, and APs in local mode. WLC-A manages Building A APs and WLC-B manages Building B APs. The customer wants users to remain connected and retain their session state including the IP address when moving between buildings. How must this requirement be incorporated into the design?

Antwort: A

Begründung:
The requirement for users to retain their session state and IP address when roaming between buildings managed by different WLCs is a Layer 3 roaming scenario. In Cisco ' s wireless architecture, IP address preservation across controller boundaries is achieved through inter-controller mobility - specifically the foreign-anchor mobility tunnel mechanism. When a client roams from Building A (WLC-A) to Building B (WLC-B), WLC-B becomes the foreign controller and WLC-A becomes the anchor controller. WLC-B tunnels the client ' s traffic back to WLC-A, allowing the client to retain its original IP address even while physically associated to an AP managed by WLC-B. This requires a mobility tunnel between WLC-A and WLC-B with both controllers configured in the same mobility group name - the group name is the trust identifier that permits the mobility tunnel and anchor-foreign relationship to form. Without the same group name, the controllers will not form a trusted mobility peer relationship. AP groups (Option C) control SSID and VLAN assignments per AP cluster but have no impact on inter-controller roaming. HA cluster configuration (Option B) creates SSO redundancy, not roaming capability between separate N+1 controllers.
Redundancy port connection (Option D) is used for SSO keepalive and state sync, not mobility tunneling.
Reference: WLSD Study Guide - Inter-Controller Mobility, Mobility Tunnels, Layer 3 Roaming and IP Address Preservation.


90. Frage
......

Heute, wo das Internet schnell entwickelt, ist es ein übliches Phänomen, Online-Ausbildung zu wählen. Fast2test ist eine der vielen Online-Ausbildungswebsites. Fast2test hat langjährige Erfahrungen und kann den Kandidaten die Lernmaterialien von guter Qualität zur Cisco 300-110 Zertifizierungsprüfung bieten, um ihre Bedürfnisse abzudecken.

300-110 Online Prüfung: https://de.fast2test.com/300-110-premium-file.html