P.S. Free 2026 Oracle 1z0-1075-25 dumps are available on Google Drive shared by PassTorrent: https://drive.google.com/open?id=1GkpMfiCmJEbac5NoPBJOawhw1R3vnvsd
Free demo for 1z0-1075-25 training materials is available, and you can have a try before buying ,so that you can have a deeper understanding of what you are going to buy. We recommend you have a try before buying. In addition, 1z0-1075-25 exam materials contain most of knowledge points of the exam, and you can master major knowledge points as well as improve your professional ability in the process of learning. We also pass guarantee and money back guarantee for 1z0-1075-25 Training Materials , if you fail to pass the exam in your first attempt, we will give you full refund ,and no other questions will be asked.
| Section | Weight | Objectives |
|---|---|---|
| Implementing Manufacturing Setups | 25% | - Core configuration
|
| Implementing Common Supply Chain Capabilities | 20% | - Configuration of Supply Chain
|
| Implementing Applications that Enable Manufacturing | 20% | - Configuration of supporting modules
|
| Advanced Features and Capabilities | 10% | - Automation and Intelligence
|
| Executing Production with Manufacturing | 25% | - Work Order management
|
Due to busy routines, applicants of the Oracle Manufacturing Cloud 2025 Implementation Professional (1z0-1075-25) exam need real Oracle Manufacturing Cloud 2025 Implementation Professional (1z0-1075-25) exam questions. When they don't study with updated Oracle 1z0-1075-25 practice test questions, they fail and lose money. If you want to save your resources, choose updated and actual Oracle Manufacturing Cloud 2025 Implementation Professional (1z0-1075-25) exam questions of PassTorrent.
NEW QUESTION # 12
Two work definitions are created in the application: one for Engine Finished Good and the other for Pallet Finished Good. The Engine Finished Good item should have Pallet Finished Good as one of its components.
How can you establish the relationship between the Pallet and Engine work definitions?
Answer: D
Explanation:
To establish a relationship between the work definitions of Engine Finished Good and Pallet Finished Good, you can create a common subinventory. This subinventory will serve as the completion subinventory for the Pallet Finished Good and the supply subinventory for the Engine Finished Good. This ensures that the Pallet Finished Good is completed in one process and is then available as a component for the Engine Finished Good.
* Subinventory Linking : Using a common subinventory ties the output from one work definition as an input to another. The Pallet becomes an inventory item that is consumed in the production of the Engine.
Oracle Manufacturing Cloud ' s documentation on work definitions and inventory setups explains how subinventories are used to link different stages of production.
NEW QUESTION # 13
To help ensure compliance with the US Code of Federal Regulations (21 CFR Part 11), your client wants to enable audit trail for manufacturing work definitions and standard operations.
Which is NOT included in the audit trail for standard operations such as creation, update, and deletion?
Answer: C
Explanation:
When enabling audit trail functionality to ensure compliance with the US Code of Federal Regulations (21 CFR Part 11), certain actions related to work definitions and standard operations are audited for changes such as creation, update, and deletion. However, not all aspects are tracked in the audit trail.
* Item structure component attributes referenced from Product Information Management (PIM) are not included in the audit trail. PIM attributes are managed separately from manufacturing-specific data, and changes to these components are not captured in the standard operations audit trail.
Audited components typically include:
* Work definition header and version attributes
* Descriptive flexfields (DFFs) at any level
* Attachments at any level
* Operation resources, including alternate resources
Oracle Manufacturing Cloud ' s documentation on audit trails details the entities that can be tracked, and PIM attributes are not part of the work definitions audit scope.
NEW QUESTION # 14
Which three can you set as Overcompletion Tolerance Type and its value for a subcomponent yield, so that the job order can report the excess production completion?
Answer: A,D,E
Explanation:
In Oracle Manufacturing Cloud, overcompletion tolerance allows for the reporting of excess production completion beyond the planned amount. The overcompletion tolerance type and value determine how much extra production can be reported:
* Percentage, value = 100 allows the system to accept overcompletion of up to 100% more than the planned quantity.
* Amount, value > 0 specifies a fixed amount by which overproduction can be tolerated.
* Percentage, value > 0 allows overproduction by a percentage greater than 0 but less than 100.
Incorrect settings:
* A : Setting the percentage to 0 means no overcompletion is allowed.
* C : An amount of 0 also means no excess production can be reported.
Oracle Cloud ' s work order management guide explains how to configure overcompletion tolerance types and values for accurate reporting of production.
NEW QUESTION # 15
Your client informs you that after running the " Process Item Structure Changes to Work Definitions " scheduled process, they received a workflow notification.
Which statement is NOT a workflow notification that you might get if automation is not performed?
Answer: B
Explanation:
After running the " Process Item Structure Changes to Work Definitions " scheduled process, a series of workflow notifications may be triggered if the automation is not performed properly. The following notifications can be expected in scenarios where manual intervention is needed:
* Statement B is incorrect because, in Oracle Manufacturing Cloud, if the manufacturing plant is enabled for ERES (Engineering Release Execution System), it generally implies that any changes in work definitions would still require an approval process for validation and control. The fact that ERES is enabled would not automatically bypass the approval process.
Correct Notifications:
* Statement A : You may receive a notification that a replacement component has been assigned as an ad hoc item to the same operation where the original component was assigned.
* Statement C : A notification may alert you that the original component is not assigned to any work definition operation, signaling a potential issue that requires manual intervention.
* Statement D : It is also possible to receive a notification indicating that the original component has been assigned to more than one work definition operation, which may require review or adjustment.
Oracle Cloud documentation on " Process Item Structure Changes to Work Definitions " explains the notifications and approval steps involved when work definitions are modified without automation.
NEW QUESTION # 16
Your customer is a light assembly manufacturing company that doesn ' t require shop floor control. A Manufacturing Engineer wants to generate a work definition automatically for some items, and wants to eliminate the explicit maintenance of work definitions.
Which three steps must they perform and verify in the Work Definition area?
Answer: B,C,E
Explanation:
In light assembly manufacturing environments where shop floor control is not required, a Manufacturing Engineer can automate the creation of work definitions to streamline production processes. The following steps must be performed and verified:
* Select a resource to be used in automatic work definition by enabling the Default attribute. This ensures that the system can automatically assign resources to the work definition without manual intervention.
* Ensure the predefined work definition name ORA_MAIN is active , as this serves as the template for automatically generating work definitions in the system.
* Select a standard operation for use in automatic work definition, also by enabling the Default attribute. This ensures that the system knows which operations to include in the work definitions.
Incorrect steps:
* C : Secondary item structure is not relevant for automatic work definitions.
* D : There can be multiple default operations, so it's not necessary to limit it to one.
Oracle Cloud SCM documentation on " Automatic Work Definitions " explains the steps and settings required for light assembly manufacturing environments.
NEW QUESTION # 17
......
Oracle Manufacturing Cloud 2025 Implementation Professional (1z0-1075-25) certification exams are a great way to analyze and evaluate the skills of a candidate effectively. Big companies are always on the lookout for capable candidates. You need to pass the Oracle Manufacturing Cloud 2025 Implementation Professional (1z0-1075-25) certification exam to become a certified professional. This task is considerably tough for unprepared candidates however with the right 1z0-1075-25 prep material there remains no chance of failure.
1z0-1075-25 Test Labs: https://www.passtorrent.com/1z0-1075-25-latest-torrent.html
BONUS!!! Download part of PassTorrent 1z0-1075-25 dumps for free: https://drive.google.com/open?id=1GkpMfiCmJEbac5NoPBJOawhw1R3vnvsd