Huawei H35-581_V2.0 New Learning Materials | Valid Exam H35-581_V2.0 Registration

Looking for customizable HCIP-5G-RNP&RNO V2.0 (H35-581_V2.0) practice exams? Look no further than PassSureExam! Our desktop and web-based practice exams allow candidates to set their own schedule and choose which Huawei H35-581_V2.0 questions to include in the exam. With a real exam environment, our practice tests help test takers prepare for the test pressure they will face during the final exam. Don't leave your success to chance - choose PassSureExam for your HCIP-5G-RNP&RNO V2.0 (H35-581_V2.0) practice exams.

Huawei H35-581_V2.0 Exam Syllabus Topics:

SectionWeightObjectives
Topic 1: 5G Radio Network Planning Fundamentals20%- Radio Propagation and Coverage Principles
  • 1. Coverage Estimation
  • 2. Link Budget Analysis
  • 3. Propagation Models
- 5G Network Architecture and Interfaces
  • 1. 5G Network Protocols and Interfaces
  • 2. 5G Core and RAN Components
  • 3. 5G SA and NSA Architectures
Topic 2: 5G Network Testing and Troubleshooting15%- Testing Methods
  • 1. Drive Test Analysis
  • 2. CQT Testing
  • 3. Network Benchmarking
- Fault Analysis
  • 1. Coverage Fault Diagnosis
  • 2. Performance Issue Troubleshooting
  • 3. Optimization Case Analysis
Topic 3: 5G Network Optimization35%- Coverage Optimization
  • 1. Interference Analysis and Mitigation
  • 2. Coverage Problem Identification
  • 3. Coverage Enhancement Methods
- Mobility and Capacity Optimization
  • 1. Parameter Tuning
  • 2. Handover Optimization
  • 3. Load Balancing
- Performance Analysis
  • 1. Network Quality Evaluation
  • 2. KPI Analysis
  • 3. Performance Monitoring
Topic 4: 5G Network Planning and Design30%- Coverage Planning
  • 1. Macro Site Planning
  • 2. Indoor Coverage Design
  • 3. Massive MIMO Deployment
- Capacity Planning
  • 1. Capacity Dimensioning
  • 2. Spectrum Utilization Planning
  • 3. Traffic Forecasting
- Site Engineering
  • 1. Antenna Configuration
  • 2. Transmission Planning
  • 3. Site Survey

>> Huawei H35-581_V2.0 New Learning Materials <<

New H35-581_V2.0 New Learning Materials | High-quality Huawei H35-581_V2.0: HCIP-5G-RNP&RNO V2.0 100% Pass

PassSureExam is famous for our company made these H35-581_V2.0 Exam Questions with accountability. We understand you can have more chances getting higher salary or acceptance instead of preparing for the H35-581_V2.0 exam. Our H35-581_V2.0 practice materials are made by our responsible company which means you can gain many other benefits as well. We are reliable and trustable in this career for more than ten years. So we have advandages not only on the content but also on the displays.

Huawei HCIP-5G-RNP&RNO V2.0 Sample Questions (Q11-Q16):

NEW QUESTION # 11
Which of the following statements regarding throughput-related indicators is incorrect?

Answer: A

Explanation:
Option A is incorrect under the standardized burst-based throughput measurement methodology because including the final small transmission interval can distort the measured throughput.
In NR performance management, throughput measurements are intended to represent radio transmission performance rather than the average application traffic rate across periods containing idle time.
The relevant measurement procedure distinguishes intervals during which the transmission buffer contains data from intervals when the buffer becomes empty.
The final transmission interval of a data burst may carry only a small residual packet. Including its duration and data volume can introduce a packet-size-dependent effect into the calculated throughput.
3GPP TS 28.554 therefore defines an extended throughput measurement method that excludes the final slot of the burst from the applicable calculation.
Option B is correct because average uplink and downlink UE throughput are used to assess radio-network performance as experienced by users.
Option C describes the general relationship between transmitted data volume and applicable active transmission time, subject to the precise measurement definitions.
Option D expresses a comparable throughput relationship at cell level, although its wording is less precise than the standardized KPI definitions.
Therefore, option A contradicts the specified throughput methodology.
Official Reference: 3GPP TS 28.554, Section 6.3.6.2, Extended Definition of Throughput , Figure 1; TS
28.552, 5G Performance Measurements .


NEW QUESTION # 12
Which of the following messages includes the reselection timer used for 5G-to-4G reselection?

Answer: A

Explanation:
System Information Block 5 (SIB5) contains the inter-Radio Access Technology (inter-RAT) cell-reselection parameters required when a UE evaluates a transition from 5G NR to LTE E-UTRA.
In NR, cell reselection is performed primarily while the UE operates in RRC_IDLE or RRC_INACTIVE.
The UE evaluates serving-cell and neighboring-cell measurements according to broadcast frequency priorities, signal-level thresholds, and applicable reselection timers.
SIB5 provides information about E-UTRA carrier frequencies and their associated reselection parameters.
A particularly important parameter is t-ReselectionEUTRA , which specifies the timer associated with inter- RAT reselection toward LTE.
The UE applies this parameter when determining whether the configured reselection conditions have remained satisfied for the required duration.
This mechanism helps prevent excessive movement between NR and LTE cells caused by short-term radio- signal fluctuations.
SIB5 can also contain E-UTRA carrier-frequency lists, reselection priorities, signal thresholds, and speed- dependent reselection scaling factors.
The other listed SIBs are not responsible for carrying the standard NR-to-E-UTRA reselection timer.
Consequently, SIB5 is the correct answer because its information elements explicitly include the E-UTRA reselection configuration.
Official Reference: 3GPP TS 38.331, Section 6.3.1, SIB5 Information Element ; TS 38.304, Cell Reselection Procedures .


NEW QUESTION # 13
Which of the following cause values can be carried in the SCG failure information message?
Select All that Apply

Answer: C,D

Explanation:
Options A and B are correct because both SCG reconfiguration failure and an RLC maximum-retransmission condition are defined failure causes that can be reported through the Secondary Cell Group (SCG) failure information procedure.
In NR Dual Connectivity, the SCG represents the secondary radio resources provided by the Secondary Node.
When an SCG failure occurs, the UE may report the failure to the Master Node without immediately releasing the entire master connection.
Option A - SCG reconfiguration failure: This condition occurs when the UE cannot successfully apply an applicable RRC reconfiguration affecting the SCG. The standardized failure type is scg-reconfigFailure .
Option B - Maximum RLC retransmissions: When the SCG Radio Link Control (RLC) entity reaches its configured maximum retransmission threshold, the UE can initiate SCG failure reporting. The corresponding standardized failure type is rlc-MaxNumRetx .
Option C - T301 timeout: T301 is associated with RRC connection reestablishment. Its expiration is not defined as one of the listed SCG failure types.
Option D - SRB1 integrity check failure: The SCG failure procedure can report an SRB3 integrity failure, not the SRB1 condition specified in this option.
Therefore, A and B are the correct choices.
Official Reference: 3GPP TS 38.331, Section 5.7.3, SCG Failure Information Procedure , and Section 6.2.2, SCGFailureInformation Message and FailureType .


NEW QUESTION # 14
Which parameter specifies the maximum number of consecutive out-of-synchronization indications that a UE receives from the lower layer on the PCell?

Answer: C

Explanation:
N310 is the correct answer because it defines the threshold number of consecutive out-of-synchronization indications received from lower protocol layers before the UE starts the applicable radio-link failure detection timer.
In 5G NR, Radio Link Monitoring (RLM) evaluates the quality of the serving radio connection using configured reference signals and associated detection thresholds.
The physical layer continuously evaluates the radio-link condition and reports in-sync or out-of-sync indications to the RRC layer when the applicable requirements are met.
When radio conditions deteriorate sufficiently, the physical layer provides out-of-sync indications.
If the UE receives N310 consecutive out-of-sync indications , the RRC layer starts timer T310, subject to the relevant procedural conditions.
The UE then monitors whether the serving radio link recovers before T310 expires.
If the UE receives N311 consecutive in-sync indications while T310 is running, the timer can be stopped, indicating recovery from the degraded radio-link condition.
If T310 expires without the required recovery, the UE performs radio-link failure handling, which may result in RRC connection reestablishment or transition to RRC_IDLE.
N312 is associated with a separate configured radio-link monitoring mechanism.
The critical distinction is that N310 specifies the consecutive indication threshold, whereas T310 represents the monitoring duration.
Official Reference: 3GPP TS 38.331, Section 5.3.10, Radio Link Failure Related Actions , and Section 7.2, Counters .


NEW QUESTION # 15
Which of the following 5GC modules connects to IMS?

Answer: B

Explanation:
The User Plane Function (UPF) is the 5G Core component that provides user-plane connectivity between PDU sessions and external Data Networks (DNs), including the IP Multimedia Subsystem (IMS).
IMS supplies multimedia communication services such as voice and video sessions using IP-based signaling and media transport.
In a 5G Standalone deployment, a UE can establish an IMS PDU session to access IMS services, including Voice over NR (VoNR).
The UPF processes user-plane packets associated with the PDU session and forwards traffic toward the appropriate external data network through the N6 interface.
For IMS services, this connectivity enables Session Initiation Protocol (SIP) signaling to reach relevant IMS components, such as the Proxy Call Session Control Function (P-CSCF).
The UPF also forwards media traffic according to the established packet-handling and forwarding rules.
The other functions serve different purposes.
AMF manages UE registration, access, and mobility procedures.
SMF controls PDU sessions, selects and configures UPFs, and manages applicable session-related QoS rules.
UDM manages subscription information and supports user-data services.
Although the SMF participates in establishing connectivity and policy enforcement, the UPF provides the actual user-plane path toward IMS.
Therefore, option A is correct.
Official Reference: 3GPP TS 23.501, Sections 4.2 and 6.2.3, 5G System Architecture and User Plane Function ; TS 23.228, Annex Y.9.2, IMS Services Architecture .


NEW QUESTION # 16
......

The three versions of our H35-581_V2.0 exam questions have their own unique characteristics. The PDF version of H35-581_V2.0 training materials is convenient for you to print, the software version can provide practice test for you and the online version is for you to read anywhere at any time. If you are hesitating about which version should you choose, you can download our H35-581_V2.0 free demo first to get a firsthand experience before you make any decision. You will love our H35-581_V2.0 study guide for sure!

Valid Exam H35-581_V2.0 Registration: https://www.passsureexam.com/H35-581_V2.0-pass4sure-exam-dumps.html