Juniper JN0-364 Exam Practice Questions are Real and Verified By Experts

2026 Latest PassReview JN0-364 PDF Dumps and JN0-364 Exam Engine Free Share: https://drive.google.com/open?id=1TfR0MAT0-k3_9QdSpa8SWIhyQD8xl_4I

As we know, it is necessary to improve your capacity in work if you want to make achievements on the job or your career. At present, many office workers choose to buy our JN0-364 study materials to enrich themselves. If you still do nothing, you will be fired sooner or later. God will help those who help themselves. Come to snap up our JN0-364 Exam Guide to let yourself always be the most excellent and have a better life!

Juniper JN0-364 Exam Syllabus Topics:

Section	Objectives
Open Shortest Path First (OSPF)	- Identify the concepts, operation, or functionality of OSPF 1. Link-state database 2. OSPF packet types 3. Adjacencies and neighbors 4. OSPF area and router types 5. Router ID 6. Link-state advertisement (LSA) packet type 7. Designated router and backup designated router - Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF 1. Routing policy application 2. Troubleshooting tools 3. Interfaces and neighbor
IPv6	- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6 - Identify the concepts, operation, or functionality of IPv6 1. Dynamic routing - OSPFv3, IS-IS, BGP 2. Static routes 3. IPv6 over IPv4 tunneling
Intermediate System to Intermediate System (IS-IS)	- Identify the concepts, operation, or functionality of IS-IS 1. Link-state database 2. Adjacencies and neighbors 3. Metrics 4. Levels and areas 5. IS-IS protocol data units (PDUs) 6. Type, length, values (TLVs) 7. Designated intermediate system (DIS) - Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS 1. Interfaces and adjacencies 2. Routing policy application 3. Troubleshooting tools
Multiprotocol Label Switching (MPLS)	- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS 1. LDP-signaled Label-Switched Paths (LSPs) 2. RSVP-signaled Label-Switched Paths (LSPs) 3. MPLS forwarding 4. Shortest path segment-routing LSPs - Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices 1. RSVP 2. Segment routing with MPLS 3. LDP 4. Labels and the label information base 5. MPLS terminology 6. End-to-end packet flow and forwarding 7. MPLS packet header 8. MPLS and routing tables
Protocol-Independent Routing	- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components 1. Static, aggregate, and generated routes 2. Filter-based forwarding 3. Load balancing - Identify the concepts, operation, or functionality of various protocol-independent routing components 1. Static, aggregate, and generated routes 2. Routing instances, including routing information base (RIB) (also known as routing table) group 3. Filter-based forwarding 4. Martian addresses 5. Load balancing
Layer 2 Bridging or VLANs	- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs 1. IRB 2. Interfaces and ports 3. VLANs 4. Provider bridging - Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS 1. Frame processing 2. Virtual Switches 3. Bridging elements and terminology 4. Provider bridging (Q-in-Q tunneling) 5. Service provider switching platforms - Identify the concepts, benefits, or functionality of VLANs 1. Integrated Routing and Bridging (IRB) 2. Tagging 3. Port modes
Spanning Tree Protocols	- Identify the concepts, operation, or functionality of STP 1. STP 2. RSTP 3. MSTP 4. VSTP - Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols 1. STP 2. RSTP 3. MSTP 4. VSTP
Border Gateway Protocol (BGP)	- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP 1. Peers and peer groups 2. Routing policy application 3. Troubleshooting tools - Identify the concepts, operation, or functionality of BGP 1. Attributes 2. IBGP and EBGP functionality and interaction 3. BGP message types 4. BGP route reflection and confederations 5. BGP basic operation 6. Route selection process

>> JN0-364 Valid Test Fee <<

JN0-364 Reliable Test Pattern - JN0-364 Hot Questions

Life of future will definitely be much more easy and convenient than the life of today, it is not late whenever you want to work as an IT engine. Our JN0-364 exam questions and answers help you realize your dream easily. We PassReview offer the top-class exam materials similar with the real test. JN0-364 Exam Questions And Answers assist people to master the real test questions and key knowledge so that candidates will fell easy and casual in real test so that they can clear exams and obtain a Juniper certification certainly.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q141-Q146):

NEW QUESTION # 141
Click the Exhibit button. All devices in the network are configured correctly and the path requirements are valid. Referring to the exhibit, which two statements are correct? (Choose two.)

A. The primary LSP will not be signaled, and its state will be down.
B. The secondary LSP will be signaled, and its state will be up.
C. The primary LSP will be signaled, and its state will be up.
D. The secondary LSP will not be signaled, and its state will be down.

Answer: B,C

Explanation:
According to the exhibit, the primary LSP is configured with a strict path via R2 to R4. Since the configuration shows valid next-hops and there is no indication of any issues, the primary LSP will be signaled and its state will be up. The secondary LSP with any-path is also configured and will be signaled as a backup; therefore, its state will be up as well, ready to take over if the primary fails.

NEW QUESTION # 142
What are two bridging concepts that are used to maintain an Ethernet switching table? (Choose two.)

A. timing
B. exporting
C. aging
D. learning

Answer: C,D

Explanation:
In Ethernet switching, learning and aging are two fundamental concepts for maintaining a dynamic Ethernet switching table (also known as a MAC address table). Learning is the process by which switches listen for frames and learn the MAC addresses by associating them with the incoming port. Aging is the mechanism that ensures the switch updates its table by removing MAC addresses that have not been seen for a certain amount of time (aging time).

NEW QUESTION # 143
Which two statements are correct about IS-IS? (Choose two.)

A. For level 2 adjacencies, the area IDs can be different.
B. For level 2 adjacencies, the area IDs must be the same.
C. A level 1 only router can never form an adjacency with a level 2 only router.
D. A level 1 only router can form an adjacency with a level 2 only router.

Answer: A,C

Explanation:
A Level 1 router can become adjacent with the Level 1 and Level 1-2 (L1/L2) router. A Level 2 router can become adjacent with Level 2 or Level 1-2 (L1/L2) router. There is no adjacency between L1 only and L2 only router. HOWEVER: If two routers are in different areas, they can only form a Level 2 adjacency. As such, two routers in different areas can NOT form a Level 1 adjacency. If you want two routers to form a Level 1 adjacency, they have to be in the same area.
IS-IS (Intermediate System to Intermediate System) operates at two levels: Level 1 and Level 2.
Level 1 routers are only aware of their own area's topology, while Level 2 routers have knowledge of the topology across areas. A Level 1 router cannot form an adjacency with a Level 2 router unless the Level 2 router is also operating as a Level 1 router (Level 1-2 router). Level 2 routers can form adjacencies regardless of their area IDs because Level 2 operates at the domain level and is used to interconnect different IS-IS areas.

NEW QUESTION # 144
You are asked to configure a new network environment that will be based on IPv6 and use OSPF.
In this scenario, which two statements correctly identify configuration task considerations?
(Choose two.)

A. The router ID used must be based on a 32-bit identifier value.
B. Participating interfaces are only required to be configured with the IPv6 protocol family and address.
C. The router ID used must be based on a 128-bit identifier value.
D. Participating interfaces must be configured with both IPv4 and IPv6 protocol families and addresses.

Answer: A,B

Explanation:
OSPF uses a router ID that is a 32-bit value, even when operating in an IPv6 environment with OSPFv3. The router ID remains an IPv4-style identifier used for protocol operations and LSAs.
When running OSPFv3 in an IPv6-based environment, participating interfaces only need to be configured with the IPv6 protocol family and an IPv6 address. IPv4 addressing is not required for OSPFv3 operation.

NEW QUESTION # 145
Referring to the exhibit, what will happen to untagged frames?

A. The untagged frames are associated with VLAN 20.
B. The untagged frames are associated with VLAN 10.
C. The untagged frames are dropped.
D. The untagged frames are load balanced between VLAN 10 and VLAN 20.

Answer: A

Explanation:
In the exhibit, the interface is configured with the native-vlan-id 20 parameter. This means that any untagged frames arriving on this interface will be associated with VLAN 20. The native VLAN serves as the default VLAN for untagged frames on a trunk port.

NEW QUESTION # 146
......

We have harmonious cooperation with exam candidates. The relation comes from the excellence of our JN0-364 training materials. We never avoid our responsibility of offering help for exam candidates like you, so choosing our JN0-364 practice dumps means you choose success. Moreover, without the needs of waiting, you can download the JN0-364 Study Guide after paying for it immediately. And we have patient and enthusiastic staff offering help on our JN0-364 learning prep.

JN0-364 Reliable Test Pattern: https://www.passreview.com/JN0-364_exam-braindumps.html

2026 Latest PassReview JN0-364 PDF Dumps and JN0-364 Exam Engine Free Share: https://drive.google.com/open?id=1TfR0MAT0-k3_9QdSpa8SWIhyQD8xl_4I