What's more, part of that TroytecDumps JN0-364 dumps now are free: https://drive.google.com/open?id=1zc0PtDAOwHX0zqBEMp6Rsxp908Utgw-_
There are many benefits after you pass the JN0-364 certification such as you can enter in the big company and double your wage. Our JN0-364 study materials boost high passing rate and hit rate so that you needn’t worry that you can’t pass the test too much. We provide free tryout before the purchase to let you decide whether it is valuable or not by yourself. To further understand the merits and features of our JN0-364 Practice Engine you could look at the introduction of our product in detail on our website.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Border Gateway Protocol (BGP) | 20-25% | - Configuration and troubleshooting - Path selection and attributes - Policy and route filtering - IBGP and EBGP - Basic operation and message types |
| Topic 2: Spanning Tree Protocols | 8-12% | - BPDU and protection features - STP, RSTP, MSTP, VSTP - Port roles and states - Configuration and convergence |
| Topic 3: Intermediate System to Intermediate System (IS-IS) | 10-15% | - PDUs and TLVs - Adjacencies and levels - Configuration and monitoring - Metrics and wide metrics |
| Topic 4: Open Shortest Path First (OSPF) | 15-20% | - Configuration and troubleshooting - Link-state database - LSA types and operation - Areas and router types |
| Topic 5: Layer 2 Bridging and VLANs | 8-12% | - Bridging concepts - Service provider switching features - VLANs and trunking |
| Topic 6: Multiprotocol Label Switching (MPLS) | 12-18% | - LDP and RSVP - Labels and LIB - Configuration and monitoring - Segment routing basics - Terminology and forwarding |
| Topic 7: IPv6 | 8-12% | - Static and dynamic routing - Autoconfiguration - Address types and format - OSPFv3 and BGP for IPv6 |
| Topic 8: Protocol-Independent Routing | 10-15% | - Static, aggregate, and generated routes - Filter-based forwarding - Martian addresses - Routing instances and RIB groups - Load balancing |
| Topic 9: High Availability | 5-8% | - NSR and GRES concepts - Nonstop active routing - Graceful restart |
| Topic 10: Tunnels | 5-8% | - GRE and IP-IP tunnels - Tunnel configuration and usage |
When you decide to buy TroytecDumps actual Juniper JN0-364 exam dumps, you automatically boost your chances of Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 exam success. In Juniper JN0-364 exam product, you can encounter Juniper JN0-364 exam questions that are present in the Juniper JN0-364 certification exam. This helps you memorize actual JN0-364 exam questions beforehand and clear the JN0-364 Certification test on the first attempt. We offer JN0-364 real questions in Juniper JN0-364 PDF questions files, JN0-364 desktop practice test software, and web-based practice exam. Read on to learn more about the top features of our Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 PDF dumps file, desktop Juniper JN0-364 practice exam software, and a web-based JN0-364 practice test.
NEW QUESTION # 48
Exhibit:
You must configure the router called ROUTER_1 to take all valid prefixes learned from internal BGP peers in AS 64523, and then re-advertise them to other internal BGP peers in the same autonomous system.
Referring to the exhibit, which configuration must you deploy on ROUTER_1 to accomplish this task?
Answer: B
Explanation:
In theBorder Gateway Protocol (BGP), theSplit Horizonrule is a fundamental loop-prevention mechanism for internal sessions. This rule dictates that a BGP speaker must not advertise a route learned from anInternal BGP (IBGP)peer to any other IBGP peer within the same Autonomous System (AS). This ensures that routes do not circulate infinitely inside a network, as IBGP does not modify the AS_PATH attribute. Consequently, to maintain full reachability, a network normally requires a "full mesh" of IBGP sessions, where every BGP- speaking router is directly peered with every other router.
In the provided exhibit,ROUTER_1is part of AS 64523. The requirement is for ROUTER_1 to take prefixes learned from its internal peers and re-advertise them to other internal peers in the same AS. This behavior is a direct violation of the standard Split Horizon rule. According to Juniper Networks technical documentation, the standard solution to scale IBGP without a full mesh is to configureRoute Reflection.
When a router is configured as aRoute Reflector (RR), it is permitted to "reflect" (re-advertise) routes learned from one IBGP peer to another. In Junos OS, the mechanism to enable Route Reflection is to configure acluster IDwithin the BGP group. By adding the cluster keyword followed by a unique 32-bit identifier (usually the router's loopback address) to the internal BGP group configuration, the router assumes the role of an RR. It then follows specific reflection rules:
* Routes learned from anEBGP peerare reflected to all IBGP peers.
* Routes learned from aRoute Reflector Clientare reflected to all other clients and non-clients.
* Routes learned from anon-clientare reflected to all clients.
Option A is incorrect because BGP advertisement rules are hard-coded; a standard export policy cannot override the Split Horizon rule. Option C handles traffic engineering tags but does not enable route reflection.
Option D would change the session to EBGP, which does not address the internal reachability requirement within AS 64523. Therefore, configuring the cluster ID is the only valid way to achieve the desired re- advertisement behavior.
NEW QUESTION # 49
You are asked to configure a new network environment that will be based on IPv6 and use OSPF.
In this scenario, which two statements correctly identify configuration task considerations?
(Choose two.)
Answer: B,D
Explanation:
OSPF uses a router ID that is a 32-bit value, even when operating in an IPv6 environment with OSPFv3. The router ID remains an IPv4-style identifier used for protocol operations and LSAs.
When running OSPFv3 in an IPv6-based environment, participating interfaces only need to be configured with the IPv6 protocol family and an IPv6 address. IPv4 addressing is not required for OSPFv3 operation.
NEW QUESTION # 50
Click the Exhibit button.
Referring to the exhibit, which protocol would automatically create a full mesh of label-switched paths between MPLS-enabled routers?
Answer: C
Explanation:
LDP automatically establishes label-switched paths between all MPLS-enabled routers that share IGP reachability. It distributes labels for IGP prefixes and uses the existing IGP topology to build LSPs dynamically, effectively creating a full mesh of LSPs across the MPLS network without requiring explicit configuration.
NEW QUESTION # 51
Which two statements are correct about TLVs in IS-IS? (Choose two.)
Answer: B,D
Explanation:
In the IS-IS protocol,TLVs (Type, Length, Value)are the fundamental building blocks used to carry information withinLink-State PDUs (LSPs). Unlike some other protocols that have a fixed, rigid packet format, IS-IS was designed from the ground up to be modular and extensible. This extensibility is achieved through the use of TLVs, which allow the protocol to carry different types of data without requiring changes to the core protocol state machine.
According to Juniper Networks technical documentation,TLVs allow flexible encoding of routing information (Option C). Each TLV specifies the "Type" of information it carries (such as neighbor information or IP reachability), the "Length" of that information, and the "Value" (the actual data). This architecture is what allowed IS-IS to easily support IPv6 by simply adding new TLVs (like TLV 236 for IPv6 reachability) without redesigning the protocol. It also supports Traffic Engineering (TE) extensions used in MPLS environments by adding TLVs that describe link bandwidth and administrative groups.
Furthermore, a singleLSP can contain multiple TLVs (Option D). When a Juniper router generates an LSP, it packs all the necessary information-such as the router's area addresses, its neighbors, and its local interface prefixes-into various TLVs and places them into a single PDU. If the amount of information exceeds the Maximum Transmission Unit (MTU) of the interface, the router will generate additional LSPs (fragmented LSPs) to carry the remaining TLVs.
Options A and B are incorrect because restricting an LSP to a single TLV would make the protocol incredibly inefficient, and the very nature of IS-IS is its ability to support multiple network layer protocols (not just IPv4) through its agnostic TLV-based transport.
NEW QUESTION # 52
Which two statements regarding GRE and IP-IP tunnels are correct? (Choose two.)
Answer: B,D
Explanation:
GRE and IP-IP tunnels encapsulate the original packet inside a new IP header, which increases the packet size and therefore adds additional overhead to the transmitted packets.
These tunneling mechanisms do not provide encryption. They only encapsulate packets for transport across another network, so separate technologies such as IPsec are required if encryption is needed.
NEW QUESTION # 53
......
Our product backend port system is powerful, so it can be implemented even when a lot of people browse our website can still let users quickly choose the most suitable for his JN0-364 qualification question, and quickly completed payment. Once the user finds the JN0-364 learning material that best suits them, only one click to add the JN0-364 Study Tool to their shopping cart, and then go to the payment page to complete the payment, our staff will quickly process user orders online. In general, users can only wait about 5-10 minutes to receive our JN0-364 learning material,
Exam JN0-364 Cram Questions: https://www.troytecdumps.com/JN0-364-troytec-exam-dumps.html
P.S. Free 2026 Juniper JN0-364 dumps are available on Google Drive shared by TroytecDumps: https://drive.google.com/open?id=1zc0PtDAOwHX0zqBEMp6Rsxp908Utgw-_