BTW, DOWNLOAD part of ExamsTorrent VNX301 dumps from Cloud Storage: https://drive.google.com/open?id=1YXs-b0zJefk8otJsfA-FF2tZZeuizOc_
Buying our VNX301 study materials can help you pass the test easily and successfully. We provide the VNX301 learning braindumps which are easy to be mastered, professional expert team and first-rate service to make you get an easy and efficient learning and preparation for the VNX301 test. If you study with our VNX301 exam questions for 20 to 30 hours, you will be bound to pass the exam smoothly. So what are you waiting for? Just come and buy our VNX301 practice guide!
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Security Services | 15% | - Threat protection and IPS/IDS - Integrated firewall capabilities - URL filtering and DNS security - ZTNA / micro-segmentation |
| Topic 2: SD-WAN Fundamentals | 15% | - SLA-based routing principles - Underlay vs overlay networking - WAN virtualization concepts - Transport independence |
| Topic 3: Versa SD-WAN Architecture & Components | 20% | - Branch CPE deployment modes - Versa Operating System (VOS) architecture - Device roles: Controller, CPE, Analytics - Controller architecture (Versa Director, Analytics) |
| Topic 4: Monitoring & Troubleshooting | 10% | - Common troubleshooting scenarios - Log analysis and debugging - SLA monitoring and reporting - Versa Analytics dashboards |
| Topic 5: Versa FlexVNF Features & Configuration | 25% | - Traffic steering and path selection - Application-aware routing - In-band network telemetry - WAN interface configuration and bonding - QoS and traffic shaping |
| Topic 6: Management & Orchestration | 15% | - Device provisioning and templates - Service chaining - Versa Director configuration and workflows - Zero-touch provisioning (ZTP) |
We are benefiting more and more candidates for our excellent VNX301 exam materials which is compiled by the professional experts accurately and skillfully. We are called the best friend on the way with our customers to help pass their VNX301 exam and help achieve their dreaming certification. The reason is that we not only provide our customers with valid and reliable VNX301 study questions, but also offer best service online since we uphold the professional ethical.
NEW QUESTION # 54
Examine the exhibit below.
As an administrator of a Versa Secure SD-WAN, you are asked to find the current bandwidth of each WAN circuit used for SD-WAN connectivity in a branch, but the Director is not displaying any information for the WAN circuits.
In this scenario, what should be done to get the graph populated for all WAN circuits?
Answer: B
Explanation:
The correct answer is B . The exhibit shows the branch interface summary in Versa Director with a Live Data column. To populate real-time bandwidth graphs for WAN circuits, the administrator must select Live Data for the WAN interfaces that need to be monitored. Versa monitoring documentation states that, from a Director node, you can monitor VOS devices and organizations, and that Director, together with Versa Analytics, can poll VOS devices in real time to understand what is happening on the devices. This real-time information can be displayed to assist with troubleshooting.
Because the question asks for the current bandwidth of each WAN circuit, historical analytics alone is not sufficient. The dashboard must poll live statistics from the selected WAN circuits. In the exhibit, not all WAN interfaces appear to have Live Data selected; therefore, the graph is not populated for all circuits. Refreshing the page does not enable polling and will not solve the missing data condition.
Selecting only MPLS would populate only the MPLS circuit, not all WAN circuits. Unselecting and reselecting only the INET circuit would affect only that one interface. Therefore, Live Data must be selected for all WAN circuits whose current bandwidth should be displayed.
NEW QUESTION # 55
A CGNAT rule is configured, but traffic is not being translated. You want to confirm whether the expected source and destination prefixes are programmed in the CGNAT access list for the tenant. Which command is most appropriate?
Answer: B
Explanation:
The correct answer is A . Versa CGNAT troubleshooting documentation states that, after connecting to the vsmd daemon, administrators can view CGNAT access lists used for traffic matching with the command show cgnat acl info < tenant-id > . The sample output shows ACL handle, rule ID, category, precedence, VRF, source IP, destination IP, tenant ID, and total filters.
This is the correct command when NAT configuration appears present but translations do not occur, because it verifies whether the runtime dataplane has the correct traffic-match rules. If the source prefix, destination prefix, VRF, or precedence is wrong, the session may never match the NAT rule, and no translation will be applied.
show system status checks system services. show device clients shows active and failed sessions, CPU usage per session, and memory load for processes. show system storage shows disk usage. These commands are useful in other troubleshooting workflows, but they do not validate CGNAT ACL matching criteria for tenant traffic.
NEW QUESTION # 56
A branch user reports poor throughput over an SD-WAN tunnel. The command show interfaces detail vni-0/0 shows the interface is operating at half-duplex / 100 Mbps , although the circuit is expected to run at 1 Gbps full duplex. What is the most likely cause?
Answer: C
Explanation:
The correct answer is C . Versa's bandwidth and throughput troubleshooting documentation specifically instructs administrators to check link speed and half-duplex conditions with the command show interfaces detail interface-name. The example output shows an interface operating at half-duplex / 100 Mbps , and the documentation states that the interface should not be in half-duplex mode and that 100 Mbps was incorrect in that scenario.
A duplex mismatch or incorrect negotiated speed can severely reduce effective throughput, cause collisions or retransmissions, and make SD-WAN overlay performance appear poor even when the overlay itself is functioning. Versa recommends fixing half-duplex and link-speed issues by correcting the configuration on the device to which the VOS device is connected and checking the ISP-side transmission mode, such as auto
/auto.
SLA probing, Controller route advertisement, and VXLAN encapsulation may affect SD-WAN path selection or tunnel formation, but the evidence in the question directly points to a physical or underlay Ethernet negotiation problem.
NEW QUESTION # 57
You configured a Versa speed-test server on a VOS device, but the client cannot start the bandwidth test. A firewall exists between the client and server. Which port must be allowed through the firewall?
Answer: B
Explanation:
The correct answer is A . Versa link-bandwidth troubleshooting documentation explains that a VOS device can be configured as a Versa speed-test client, a Versa speed-test server, or both simultaneously. After the server is configured, the client starts the test by initiating a TCP-based connection toward the speed-test server. The server listens on port 5201 . The documentation includes an explicit note that if the VOS device is behind a firewall, port 5201 must be open .
This is different from the SD-WAN overlay data path, which commonly uses UDP-based transport encapsulation, and different from internet speed-test traffic, which uses other ports depending on the specific test type. In this scenario, the question states that a Versa speed-test server was configured, so the relevant requirement is TCP 5201 reachability from the client to the server.
TCP 443 may be used for management or web access, UDP 4790 is associated with SD-WAN transport encapsulation, and UDP 53 is DNS. None of those replace TCP 5201 for Versa speed-test server operation.
NEW QUESTION # 58
A VOS branch has two WAN circuits. You suspect the configured transport domain mapping is wrong because one link is not building the expected SD-WAN path. Which VSM control-plane command is most useful to check local WAN circuit information, transport domains, NAT status, and local tunnel-site details?
Answer: D
Explanation:
The correct answer is A . Versa SD-WAN data-path troubleshooting documentation instructs administrators to connect to the VSM control plane with vsh connect vsmd and then use show vsm p2mp local-tunnel-sites 0 to check the status of local site objects. The example output includes the local site key, neighbor IP, site type, site name, branch ID, tenant ID, and detailed WAN link information. It also shows fields such as WAN local VRF ID, WAN local link name, circuit information, link ID, behind-NAT status, shaping rate, public and private addresses, link flags, transport domain, and SLA interval.
This command is therefore highly relevant when validating whether the local SD-WAN site has learned and built the correct WAN transport objects for overlay tunnel creation. If a circuit is mapped to the wrong transport domain or has incorrect NAT/public/private address state, the local-tunnel-site output is one of the best places to confirm it.
The other commands are useful for software version, CGNAT summary, or CPU usage, but they do not show the detailed SD-WAN local tunnel-site transport mapping.
NEW QUESTION # 59
......
In recent years, the market has been plagued by the proliferation of VNX301 learning products on qualifying examinations, so it is extremely difficult to find and select our VNX301 test questions in many similar products. However, we believe that with the excellent quality and good reputation of our VNX301 Study Materials, we will be able to let users select us in many products. Our study materials allow users to use the VNX301 certification guide for free to help users better understand our products better.
New VNX301 Dumps Questions: https://www.examstorrent.com/VNX301-exam-dumps-torrent.html
What's more, part of that ExamsTorrent VNX301 dumps now are free: https://drive.google.com/open?id=1YXs-b0zJefk8otJsfA-FF2tZZeuizOc_