ExamPassdump는 가장 효율높은 Cisco 300-110시험대비방법을 가르쳐드립니다. 저희 Cisco 300-110덤프는 실제 시험문제의 모든 범위를 커버하고 있어 Cisco 300-110덤프의 문제만 이해하고 기억하신다면 제일 빠른 시일내에 시험패스할수 있습니다. 경쟁율이 심한 IT시대에 Cisco 300-110시험 패스만으로 이 사회에서 자신만의 위치를 보장할수 있고 더욱이는 한층 업된 삶을 누릴수도 있습니다.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Wired and Wireless Infrastructure | 30% | - Design radio management - Design for data, voice, video, location - Design wireless bridging (mesh) - Design high-density wireless networks - Physical infrastructure requirements - Logical infrastructure requirements |
| Topic 2: Wireless Site Survey | 25% | - Post-deployment site survey - Planning tools and network metrics evaluation - Pre-deployment site survey - Collect design requirements and evaluate constraints - Predictive site survey - Layer 1 site survey analysis - Material attenuation and its design effects |
| Topic 3: WLAN High Availability | 20% | - Design AP high availability - Design controller high availability |
| Topic 4: Mobility | 25% | - Design mobility groups - Optimize client roaming - Site Tags - Validate mobility tunneling |
ExamPassdump의 도움으로 여러분은 많은 시간과 돈을 들이지 않으셔도 혹은 여러학원등을 다니시지 않으셔도 우리 덤프로 안전하게 시험을 통과하실 수 있습니다.Cisco 300-110시험자료는 우리 ExamPassdump에서 실제시험에 의하여 만들어진 것입니다. 지금까지의 시험문제와 답과 시험문제분석 등입니다. ExamPassdump에서 제공하는Cisco 300-110시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.
질문 # 98
A customer is migrating from a legacy Cisco AireOS WLC to a new Cisco 9800 IOS XE WLC with Cisco 9100 APs. The new APs must associate to the Catalyst 9800 WLC, and wireless clients must seamlessly roam between the old and new WLCs even during SSO. The new Catalyst 9800 WLC deployment is configured to use SSO. Which command must be added to meet the requirements?
정답：A
설명：
In a mixed deployment where a Cisco Catalyst 9800 IOS XE WLC operating in SSO is required to establish a mobility peer relationship with a legacy AireOS WLC, the critical configuration requirement is that the 9800 SSO pair presents a single, consistent mobility MAC address to all peer WLCs. When the 9800 is in SSO mode, the active and standby controllers function as a single logical entity, but AireOS WLCs identify mobility peers by MAC address. If the MAC address changes during an SSO switchover, the AireOS peer will detect the change and tear down the mobility tunnel, disrupting inter-controller client roaming. The command 'wireless mobility mac-address <MAC>' configures a static, persistent mobility MAC address on the 9800 SSO pair that remains constant regardless of which physical unit is active. This ensures the AireOS WLC always identifies the 9800 pair by the same MAC address, maintaining the mobility tunnel and enabling seamless client roaming.
질문 # 99
A company has three Cisco WLCs that are joined as a mobility group. Mobility multicast messaging is enabled. All the WLCs in the mobility group communicate via a multicast. Which configuration must be identical between the three WLCs to validate communication?
정답：C
질문 # 100
A customer is building a new warehouse facility that has only its foundation and perimeter walls built. The building will be complete in the next eight months. The customer needs a detailed bill of materials and costs for a wireless network that must support RF scanners throughout the warehouse. How should the survey be performed?
정답：D
설명：
A predictive survey (also called a virtual or model-based survey) is the appropriate and only feasible methodology for a facility that does not yet physically exist in its complete form. Since the warehouse has only its foundation and perimeter walls, it is impossible to conduct any form of physical (active or passive) survey of the complete environment. A predictive survey uses architectural floor plans imported into a tool such as Ekahau Site Survey, where the engineer defines attenuation areas representing planned materials and structures: concrete block walls, steel shelving racks, metallic surfaces, and other warehouse-specific obstructions. The software models RF propagation through these defined attenuation values, enabling accurate AP placement planning, antenna selection, and channel planning without physical access to the complete facility. The output is a validated bill of materials with AP counts, models, and associated infrastructure requirements. Passive surveys (Options A and C) require physical APs transmitting RF signals to collect measurement data - impossible in an incomplete building. A hybrid approach mixing passive survey with predictive modeling introduces measurement errors from the incomplete physical state. Reference: WLSD Study Guide - Survey Types, Predictive Survey Methodology, Pre-Deployment Planning for New Construction.
질문 # 101
A consultant must design a WLAN for a large campus with high AP density, 50-100 clients per cell, 5 Mbps throughput per client minimum, 5 GHz and 2.4 GHz coverage at -67 dBm, and no
802.11b clients. Which two WLAN design approaches meet the requirements? (Choose two.)
정답：C,D
설명：
Designing for 50-100 clients per cell with 5 Mbps minimum throughput and no 802.11b clients requires two critical optimizations. First, setting minimum mandatory data rates to 12-18 Mbps (Option A) removes legacy lower data rates from the AP's supported rate set. When 1, 2, 5.5, and
11 Mbps rates are disabled and 12 Mbps becomes the minimum mandatory rate, clients that cannot achieve at least 12 Mbps are rejected from the cell, maintaining throughput standards.
Without this, a single 802.11b client operating at 1 Mbps can consume an inordinate share of airtime and reduce throughput for all other clients below the required minimum. Second, Flexible Radio Assignment (FRA) for 2.4 GHz reduction (Option D) is critical in high-density environments.
FRA allows the WLC to dynamically reassign some 2.4 GHz radios to 5 GHz operation or monitor mode, reducing 2.4 GHz cell size and interference while increasing 5 GHz capacity.
질문 # 102
A customer has a Cisco wireless network with two Cisco Catalyst 9800 Series WLCs in a high availability cluster, 50 Cisco 2800I APs, and all SSIDs and services are 5 GHz only. A security mandate requires that rogue APs be scanned and identified in 2.4 GHz and 5 GHz bands without impacting existing client connectivity. How must the wireless network be reconfigured to meet the requirement without purchasing additional APs?
정답：A
설명：
The Cisco Aironet 2800 Series APs feature a dual-radio architecture with a dedicated 5 GHz radio (slot 1) and a Flexible Radio Assignment (XOR) radio (slot 0) that can operate in either 2.4 GHz or 5 GHz, or be assigned to monitor mode for scanning functions. Since all existing SSIDs and services are 5 GHz only, the slot 1 (dedicated 5 GHz) radio is responsible for all current client connectivity and must remain in Client Serving mode to maintain uninterrupted service. The XOR radio (slot 0) is currently either operating as a secondary 5 GHz radio or idle. By setting the XOR radio to Monitor mode, it becomes a dedicated scanner that continuously scans all channels across both 2.4 GHz and 5 GHz spectrum for rogue AP detection, using the embedded CleanAir and WIDS capabilities. This covers the previously unmonitored 2.4 GHz band and provides supplementary 5 GHz monitoring. No additional APs need to be purchased because the existing AP's XOR radio is repurposed.
질문 # 103
......
ExamPassdump는 저희 제품을 구매한 분들이 100%통과율을 보장해드리도록 최선을 다하고 있습니다. ExamPassdump를 선택한것은 시험패스와 자격증취득을 예약한것과 같습니다. ExamPassdump의 믿음직한 Cisco인증 300-110덤프를 공부해보세요.
300-110완벽한 시험공부자료: https://www.exampassdump.com/300-110_valid-braindumps.html