Pass4Test 의 학습가이드에는USGBC LEED-AP-O-M인증시험의 예상문제, 시험문제와 답입니다. 그리고 중요한 건 시험과 매우 유사한 시험문제와 답도 제공해드립니다. Pass4Test 을 선택하면 Pass4Test 는 여러분을 빠른시일내에 시험관련지식을 터득하게 할 것이고USGBC LEED-AP-O-M인증시험도 고득점으로 패스하게 해드릴 것입니다.
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
| 주제 4 |
|
| 주제 5 |
|
| 주제 6 |
|
>> USGBC LEED-AP-O-M최신 시험기출문제 <<
IT업계에 계속 종사하고 싶은 분이라면 자격증 취득은 필수입니다. USGBC LEED-AP-O-M시험은 인기 자격증을 필수 시험과목인데USGBC LEED-AP-O-M시험부터 자격증취득에 도전해보지 않으실래요? USGBC LEED-AP-O-M덤프는 이 시험에 대비한 가장 적합한 자료로서 자격증을 제일 빠르게 간편하게 취득할수 있는 지름길입니다. 구매전 덤프구매사이트에서 DEMO부터 다운받아 덤프의 일부분 문제를 체험해보세요.
질문 # 57
A building owner upgrades the building automation system (BAS) to allow programmable load control. Which of the following credits can be pursued because of the upgrade?
정답：B
설명：
Demand response is a voluntary program that encourages building owners to reduce their electricity use during peak periods or shift it to off-peak times. The upgraded BAS can enable the building owner to participate in demand response programs by allowing programmable load control, which can adjust the operation of HVAC, lighting, and other systems based on the demand response signals. This can help reduce the stress on the grid, lower the electricity costs, and earn LEED points.
References:
* Part 2 of current page talks about the Energy and Atmosphere Credit, Demand Response1.
* Guide to the LEED AP Operations and Maintenance (O+M) Examby Michelle Cottrell, pages 97-98.
질문 # 58
According to the Facility Maintenance Performance guidelines, what is the highest level of performance that can be achieved during an audit?
정답：A
설명：
EQc4: Facility Stewardship Performance uses a five-level maintenance-performance scale. On this scale, Level 1-Exemplary Facility represents the highest level of maintenance performance, while progressively higher numerical levels indicate weaker maintenance conditions.
At Level 1, building equipment and components are functional and maintained in top condition; responses to maintenance and service calls are prompt; equipment is upgraded regularly; and the facility demonstrates a consistently high level of care. Critically, 100% of maintenance activities are proactive, meaning maintenance occurs before failure or malfunction rather than primarily in response to breakdowns.
Level 3, Managed Maintenance, represents approximately average facility performance. Equipment generally functions but may occasionally break down, and at least 50% of maintenance activities are proactive. Level 5, Limited Management, represents the opposite end of the performance spectrum and therefore cannot be the highest level.
LEED awards points based on the resulting audit score. An audit score of 2.5 or better earns one point, while a score of 1.5 or better-between comprehensive and exemplary maintenance-earns two points.
The key exam rule is that lower maintenance-level numbers indicate superior facility stewardship.
Reference Topic: LEED v5 O+M - EQc4 Facility Stewardship Performance, Option 1: Facility Maintenance Performance; Level 1 Exemplary Facility.
질문 # 59
What is the maximum distance food or beverage raw materials can be harvested and produced in order to achieve the Materials and Resources Credit, Purchasing - Ongoing?
정답：C
설명：
The maximum distance for food or beverage raw materials to be harvested and produced for achieving the Materials and Resources Credit, Purchasing - Ongoing, is 100 miles (160 kilometers). This distance supports local economies and reduces the environmental impacts associated with transportation.
References: The LEED AP O+M Reference Guide outlines the criteria for sustainable purchasing, including the support of local food production within 100 miles of the project site1.
For the Materials and Resources Credit, Purchasing - Ongoing, food or beverage raw materials must be harvested and produced within a maximum distance of 100 miles (160 kilometers) from the project site. This criterion supports local agriculture and reduces the environmental impacts associated with transportation, contributing to a more sustainable supply chain.
References:This distance limitation is specified in the LEED AP Operations + Maintenance reference guide, particularly in the section on sustainable purchasing practices. The guide outlines how sourcing locally not only supports local economies but also minimizes carbon emissions related to transportation.
질문 # 60
A building owner wishes to provide better Indoor Environmental Quality to the building occupants while containing capital costs. The LEED AP suggests pursuing Indoor Environmental Quality Credit, Enhanced Indoor Air Quality Strategies, Option 2. Filtration. However, the existing HVAC system was not designed to accommodate the required filters but is otherwise efficient and operating well. Which strategy would enable credit achievement?
정답：B
설명：
In a scenario where the existing HVAC system was not designed to accommodate the required filters for Indoor Environmental Quality Credit, Enhanced Indoor Air Quality Strategies, Option 2, Filtration, but is otherwise efficient and operating well, replacing the existing HVAC system with an air handler that can accommodate the filters is a strategy to achieve credit. This option allows for the integration of higher efficiency filters without compromising the performance of the HVAC system.
질문 # 61
What is the minimum duration required for tracking waste generated and diverted to establish a waste diversion rate?
정답：C
설명：
MRc1: Waste Reduction Performance requires projects to calculate their waste-diversion rate by tracking materials generated through ongoing building operations and maintenance for a minimum of three consecutive months within the 12-month reporting period. The project must track waste generation monthly and document the material type and weight of applicable nonhazardous solid materials.
The distinction between the tracking period and the overall LEED reporting period is important. The LEED reporting period is 12 months, but MRc1 does not require continuous waste weighing for all 12 months.
Instead, a representative minimum three-month consecutive tracking period can be used. The team must nevertheless account for seasonal or intermittent waste streams that fall outside that period, such as periodic electronics collections or seasonal landscape waste.
The diversion calculation is based on:
Weight of material diverted ÷ total weight of material generated
Diversion may include waste prevention, reuse, recycling, composting, and other qualifying strategies.
Landfill disposal and waste-to-energy incineration do not count as diversion under this credit.
Therefore, twelve months is the broader certification reporting framework, while three consecutive months is the minimum direct waste-tracking duration required for calculating MRc1 performance.
Reference Topic: LEED v5 O+M - MRc1 Waste Reduction Performance; minimum three-consecutive- month waste tracking period.
질문 # 62
......
Pass4Test의 USGBC인증 LEED-AP-O-M덤프를 선택하여USGBC인증 LEED-AP-O-M시험공부를 하는건 제일 현명한 선택입니다. 시험에서 떨어지면 덤프비용 전액을 환불처리해드리고USGBC인증 LEED-AP-O-M시험이 바뀌면 덤프도 업데이트하여 고객님께 최신버전을 발송해드립니다. USGBC인증 LEED-AP-O-M덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다.
LEED-AP-O-M인증시험 덤프자료: https://www.pass4test.net/LEED-AP-O-M.html