Do you want to find a good job which brings you high income? Do you want to be an excellent talent? The AZ-802 certification can help you realize your dream which you long for because the AZ-802 test prep can prove that you own obvious advantages when you seek jobs and you can handle the job very well. So our AZ-802 Exam Preparation can be conducive to helping you pass the AZ-802 exam and find a good job. What are you waiting for? Just come and buy our AZ-802 exam questions!
| Section | Objectives |
|---|---|
| Disaster recovery and migration | - Backup and restore
|
| Networking and storage infrastructure | - Storage management
|
| Manage hybrid compute and virtualization | - Virtual machines
|
| Implement and manage high availability | - Load balancing and redundancy
|
| Monitoring and troubleshooting | - System monitoring
|
| Secure Windows Server hybrid infrastructures | - Identity and access management
|
>> Microsoft AZ-802 Valid Dumps <<
If you are determined to purchase our AZ-802 valid exam collection materials for your companies, if you pursue long-term cooperation with site, we will have some relate policy. Firstly we provide one-year service warranty for every buyer who purchased AZ-802 valid exam collection materials. Every buyer can share one year free updates and preparation assist. Secondly if you want to get the free updates not just for one year, you want to still get the new version of Microsoft AZ-802 valid exam collection materials after one year, you share 50% discount for the second year.
NEW QUESTION # 287
You have two servers named Host1 and Host2 that run Windows Server 2022 and are members of a workgroup named Contoso. Both servers have the Hyper-V server role installed and are identical in hardware and configuration. Host1 contains three virtual machines. Each server is located in a separate site that connects by using a high-speed WAN link. You need to replicate the virtual machines from Host1 to Host2 for a disaster recovery solution. Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
Answer: B,C,D
Explanation:
Because Host1 and Host2 are members of a workgroup rather than joined to an Active Directory domain, Kerberos authentication cannot be used for Hyper-V Replica, since Kerberos fundamentally depends on domain trust relationships that do not exist between workgroup-joined machines. In a workgroup or cross- domain scenario, Hyper-V Replica instead requires certificate-based authentication over HTTPS, together with opening the associated TCP port exceptions in the Windows Firewall so that replication traffic between the two hosts is permitted. Before any virtual machine can be replicated to Host2, that server must first be configured and explicitly enabled as a Replica server, since a Hyper-V host does not accept incoming replication traffic by default. Once Host2 is enabled as a Replica server and certificate-based authentication with the necessary firewall exceptions is in place, replication is then turned on individually for each of the three virtual machines on Host1 by running the Enable Replication wizard against each one. Live Migration is an unrelated high-availability feature used to move a running virtual machine between cluster nodes without downtime, and it plays no role in establishing Hyper-V Replica for disaster recovery, so enabling live migration is not one of the required actions.
NEW QUESTION # 288
You have five Azure virtual machines. You have a dedicated Azure Storage account to collect performance data. You need to send the collected data directly to the Azure Storage account. What should you install on the virtual machines?
Answer: B
Explanation:
Sending collected performance data directly to a dedicated Azure Storage account is a specific capability of the Azure Diagnostics extension, often abbreviated WAD, which can be configured to write performance counter data and event log data straight into tables and blobs inside a specified storage account with no intermediate monitoring service required at all. The Azure Monitor Agent, by contrast, ships the data it collects through Data Collection Rules only to destinations such as a Log Analytics workspace, Azure Monitor Metrics, Azure Data Explorer, or Microsoft Fabric; it has no data flow destination that targets a general-purpose Azure Storage account directly, so it cannot satisfy this exact requirement even though it is the newer, more broadly capable agent overall. The Dependency agent exists to map process-level dependencies for VM insights rather than to collect performance counters, the Telegraf agent is used specifically to feed Linux VM metrics into Azure Monitor Metrics, and the Azure Connected Machine agent exists purely to onboard non-Azure servers to Azure Arc; none of those three routes performance data into Azure Storage at all. Therefore, installing the Azure Diagnostics extension on the five virtual machines is the correct action.
NEW QUESTION # 289
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains a failover cluster named Cluster1. You need to configure Cluster-Aware Updating (CAU) on the cluster by using Windows Admin Center (WAC). Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
1. Add a group managed service account (gMSA). 2. Add Cluster1 to WAC. 3. Enable CredSSP.
Cluster-Aware Updating in Windows Admin Center needs a group managed service account already provisioned in Active Directory to actually run the CAU scan and update orchestration operations under, so that account must be created first, before anything else in this sequence can proceed. Cluster1 is then added as a cluster connection inside Windows Admin Center, which is what makes its Updates blade, including the Cluster-Aware Updating tool, become available for that cluster in the first place. Windows Admin Center ' s Cluster-Aware Updating tool specifically requires CredSSP to be enabled, along with explicit credentials supplied at the time of use, before it will actually run; attempting to use the tool beforehand produces the documented error stating that Cluster-Aware Updating cannot be used without enabling CredSSP and providing explicit credentials. Enabling CredSSP is therefore the final step in the sequence, since it is what unlocks the already-added cluster connection ' s Cluster-Aware Updating tool for actual use, after the gMSA and the WAC connection are already in place.
NEW QUESTION # 290
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your network contains a single-domain Active Directory Domain Services (AD DS) forest named contoso.com.
The functional level of the forest is Windows Server 2012 R2. All domain controllers run Windows Server
2012 R2. Sysvol replicates by using the File Replication Service (FRS). You plan to replace the existing domain controllers with new domain controllers that will run Windows Server 2022. You need to ensure that you can add the first domain controller that runs Windows Server 2022. Solution: You run the Active Directory Migration Tool (ADMT). Does this meet the goal?
Answer: B
Explanation:
The Active Directory Migration Tool is used to move or restructure objects such as user accounts, groups, and computer accounts between separate Active Directory forests or domains, along with related tasks such as translating security identifiers during an inter-forest migration; it has no function whatsoever related to SYSVOL replication technology, since SYSVOL replication configuration is not one of the object types ADMT operates on. Running ADMT does not convert FRS-based SYSVOL replication to DFS Replication, does not touch the FRS binaries requirement that blocks newer-OS domain controllers from being promoted, and is not even applicable here since this scenario describes a single existing forest and domain rather than a migration between two separate forests. Because ADMT does nothing to remove the actual restriction preventing a Windows Server 2022 domain controller from being added while SYSVOL still uses FRS, running it does not meet the stated goal; only migrating SYSVOL to DFS Replication actually resolves the blocking condition described in the scenario.
NEW QUESTION # 291
You have a Site-to-Site VPN between an on-premises network and an Azure VPN gateway. BGP is disabled for the Site-to-Site VPN. You have an Azure virtual network named Vnet1 that contains a subnet named Subnet1. Subnet1 contains a virtual machine named Server1. You can connect to Server1 from the on- premises network. You extend the address space of Vnet1. You add a subnet named Subnet2 to Vnet1.
Subnet2 uses the extended address space. You deploy an Azure virtual machine named Server2 to Subnet2.
You cannot connect to Server2 from the on-premises network. Server1 can connect to Server2. You need to ensure that you can connect to Subnet2 from the on-premises network. What should you do?
Answer: C
Explanation:
With BGP disabled, the Site-to-Site connection relies entirely on statically defined routes rather than on dynamic route propagation between the on-premises network and Azure. When Subnet2 is added within Vnet1 ' s extended address space, Azure ' s own side of the tunnel already knows about it automatically, since it is simply part of the connected virtual network, but the on-premises routers have no static route telling them that traffic destined for Subnet2 ' s address range should be sent across the VPN tunnel to Azure at all.
Server1 is able to reach Server2 because that traffic stays entirely inside the Azure virtual network and never needs to cross the tunnel, but on-premises hosts have no configured path to the new subnet until the on- premises routing tables, and the local VPN device ' s configuration if applicable, are updated to include a route for Subnet2 ' s range pointed at the tunnel. Adding another Site-to-Site tunnel, a private endpoint, or a user-defined route table inside Subnet2 does nothing to address the missing route on the on-premises side, which is the actual point of failure described in the scenario.
NEW QUESTION # 292
......
Everybody knows that Microsoft is an influential company with high-end products and best-quality service. It will be a long and tough way to pass AZ-802 exam test, especially for people who have no time to prepare the AZ-802 Questions and answers. So choosing right AZ-802 dumps torrent is very necessary and important for people who want to pass test at first attempt.
New AZ-802 Study Notes: https://www.freedumps.top/AZ-802-real-exam.html