BONUS!!! Download part of Pass4Test NSE5_FSW_AD-7.6 dumps for free: https://drive.google.com/open?id=1OoJMKmNSxCZvPpCjjBvO9RDk3sR7qPny
You have to know that a choice may affect your very long life. Our NSE5_FSW_AD-7.6 guide quiz is willing to provide you with a basis for making judgments. You can download the trial version of our NSE5_FSW_AD-7.6 practice prep first. After using it, you may have a better understanding of some of the advantages of NSE5_FSW_AD-7.6 Exam Materials. We have three versions of our NSE5_FSW_AD-7.6 learning quiz: the PDF, Software and APP online for you to choose.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> Pdf Demo NSE5_FSW_AD-7.6 Download <<
The contents of NSE5_FSW_AD-7.6 learning questions are carefully compiled by the experts according to the content of the NSE5_FSW_AD-7.6 examination syllabus of the calendar year. They are focused and detailed, allowing your energy to be used in important points of knowledge and to review them efficiently. In addition, NSE5_FSW_AD-7.6 Guide engine is supplemented by a mock examination system with a time-taking function to allow users to check the gaps in the course of learning.
NEW QUESTION # 36
Refer to the exhibit.
The security port policy is configured as shown in the exhibit. Which behavior occurs if a device connected to the port that does not support 802.1X? (Choose one answer)
Answer: B
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, the interaction between a managed switch and a connected endpoint depends on whether the endpoint can participate in the 802.1X authentication process. When a security policy is applied to a port, the switch sends EAP (Extensible Authentication Protocol) requests to the device to initiate the login.
The FortiSwitch handles two primary failure scenarios differently:
* Non-supplicant (No 802.1X Support):If a device, such as a legacy PC or a basic printer, does not have an 802.1X supplicant, it will not respond to the switch's EAP requests. In this case, the switch waits for the duration specified in theGuest authentication delayfield (30 seconds in the exhibit). Once this timer expires without a response, the switch places the device into theGuest VLAN. As shown in the exhibit, the Guest VLAN is explicitly set to"onboarding.fortilink (onboarding)".
* Authentication Failure:If a devicedoessupport 802.1X but the user provides incorrect credentials, the RADIUS server returns an Access-Reject message. In this scenario, the device is moved to the Authentication fail VLAN, which the exhibit identifies as"quarantine.fortilink (quarantine)".
Note:BecauseMAC authentication bypass (MAB)is disabled in the exhibit, the switch will not attempt to authenticate the device's MAC address against the RADIUS server before defaulting to the Guest VLAN.
Therefore, for any device lacking an 802.1X supplicant, the result is placement into theonboardingVLAN.
NEW QUESTION # 37
(Full question statement start from here)
Refer to the exhibit.
Which information does FortiGate use to generate the port details in the FortiSwitch Faceplates view?
(Choose one answer)
Answer: A
Explanation:
In a FortiLink-managed switching architecture, the FortiGate firewall acts as the centralized controller for downstream FortiSwitch devices. TheFortiSwitch Faceplatesview in the FortiGate GUI provides a physical- style representation of switch ports, including port numbers, operational status, link state, speed, duplex, and connected neighbor information. According to FortiOS 7.6 and FortiSwitchOS 7.6 documentation fromFortinet, this port-level intelligence is derived fromLink Layer Discovery Protocol (LLDP) advertisements received from the FortiSwitch.
LLDP is an IEEE 802.1AB standard protocol used for vendor-neutral Layer 2 neighbor discovery.
FortiSwitch periodically sends LLDP frames that include detailed port descriptors such as chassis ID, port ID, port description, system name, system capabilities, and VLAN-related attributes. When FortiGate receives these LLDP advertisements over the FortiLink interface, it correlates the information with the managed FortiSwitch inventory and renders accurate port details in the Faceplates view.
Other options are incorrect for the following reasons. The FortiSwitch model alone is insufficient to populate per-port operational details. Cisco Discovery Protocol (CDP) is a Cisco-proprietary protocol and is not used by FortiGate for Faceplates visualization. FortiLink discovery frames are used to establish and maintain the FortiLink management relationship, but they do not carry the granular per-port metadata required for the Faceplates display.
Therefore, the Faceplates view relies specifically onLLDP advertisements received from the FortiSwitch, making optionCthe correct and fully verified answer based on FortiOS 7.6 and FortiSwitchOS 7.6 behavior.
NEW QUESTION # 38
What are two ways in which automatic MAC address quarantine works on FortiSwitch? (Choose two.)
Answer: B,D
Explanation:
Reference: FortiSwitch 7.6 Study Guide, page 263
NEW QUESTION # 39
You are managing FortiSwitch ports from a FortiGate device with multiple VDOMs. Which two methods can you use to assign FortiSwitch ports to VDOMs? (Choose two answers)
Answer: A,B
Explanation:
According to theFortiOS 7.6 Administration Guideand theFortiSwitch 7.6 FortiLink Guide, managing FortiSwitch units in a multi-VDOM environment allows for granular control over physical switch resources.
By default, when a FortiSwitch is discovered and authorized via FortiLink, its ports reside in the same VDOM as the FortiLink interface (typically the root or a dedicated management VDOM).
To allocate these ports to other VDOMs, administrators have two primary methods. The first method isdirect assignment(Option A). Using the FortiGate CLI or GUI, an administrator can export a specific physical port directly to a target VDOM. For example, the command set export-to <VDOM_name> under the config switch- controller managed-switch port settings physically isolates that port for use only by the specified VDOM.
This is ideal for multi-tenant scenarios where a specific physical connection must be dedicated to a single business unit.
The second method involves using aVirtual Port Pool (VPP)(Option D). This method provides a layer of virtualization for switch ports. An administrator first creates a pool (VPP) in the management VDOM and assigns physical ports to it. Then, from the tenant VDOM, an administrator can "request" a port from that specific pool. This allows for a more flexible "shared" infrastructure where ports are not permanently tethered to a single VDOM until they are claimed from the pool. Both methods ensure that traffic remains logically and physically isolated between VDOMs, supporting the security requirements of complex enterprise deployments. Options B and C are incorrect as they relate to traffic routing and device identification rather than the foundational assignment of hardware ports to virtual domains.
NEW QUESTION # 40
Which three are valid actions that a FortiSwitch access control list (ACL) can apply to matching traffic?
(Choose three answers)
Answer: A,C,E
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theNSE 5 FortiSwitch 7.6 Administrator Study Guide, Access Control Lists (ACLs) are used to perform multiple actions on matching traffic as it passes through the switch pipeline. The documentation explicitly categorizes these valid actions into three distinct functional groups:Traffic processing,QoS (Quality of Service), andVLANmodifications.
* Traffic Processing (Option C):This is a primary category of ACL actions. It includes operations that dictate how a frame is physically handled or monitored. Valid specific actions under this category includedrop(discarding the packet),count(incrementing a packet counter for statistics),redirect (sending the packet to a specific interface or CPU queue), andmirror(copying the traffic to a monitor port).
* QoS (Option E):The QoS category allows the switch to manage traffic prioritization and bandwidth.
ACLs can be configured toset the egress queue(assigning a frame to one of the eight priority queues), remark CoS (Class of Service)orDSCP (Differentiated Services Code Point)values in the frame header, and applypolicersfor rate limiting.
* VLAN / Set outer VLAN tags (Option D):Under the VLAN category, the most notable action is the ability toset outer VLAN tagson frames. This is particularly useful in scenarios involving Q-in-Q tunneling or service provider environments where a secondary tag is required for transport across a managed fabric.
It is important to note thatAssign the VLAN ID (Option A)is typically a function ofNAC (Network Access Control)orDynamic VLAN Assignmentrather than a standard ACL action; within an ACL context, vlan-id is primarily used as aclassifier(to match traffic) rather than an action.Quarantine devices (Option B)is a high- level security response triggered by the FortiGate NAC engine and is not a direct action available within the FortiSwitch ACL configuration menu.
NEW QUESTION # 41
......
The Fortinet NSE5_FSW_AD-7.6 certification verifies that you have a basic understanding of Fortinet NSE 5 - FortiSwitch 7.6 Administrator concepts and virtualization. Success in the NSE5_FSW_AD-7.6 exam of the Fortinet NSE5_FSW_AD-7.6 certificate also proves your knowledge of basic troubleshooting concepts and data center technology. When you earn the NSE5_FSW_AD-7.6 Certification you will get reliable exam guide materials.
Practice NSE5_FSW_AD-7.6 Exams Free: https://www.pass4test.com/NSE5_FSW_AD-7.6.html
P.S. Free & New NSE5_FSW_AD-7.6 dumps are available on Google Drive shared by Pass4Test: https://drive.google.com/open?id=1OoJMKmNSxCZvPpCjjBvO9RDk3sR7qPny