In order to give the best AZ-802 study braindumps to our worthy customers, we also focus on the customer's user experience. Our staff provides you with the smoothest system. If you have encountered some problems while using AZ-802 Practice Guide, you can also get our timely help as our service are working 24/7 online. Of course, our AZ-802 exam questions are advancing with the times and you will get the latest information.
| Section | Objectives |
|---|---|
| Topic 1: Networking and storage infrastructure | - Networking
|
| Topic 2: Manage hybrid compute and virtualization | - Containers
|
| Topic 3: Disaster recovery and migration | - Migration scenarios
|
| Topic 4: Implement and manage high availability | - Load balancing and redundancy
|
| Topic 5: Monitoring and troubleshooting | - Diagnostics
|
| Topic 6: Secure Windows Server hybrid infrastructures | - Security configuration
|
Users don't need to install any plugins or software to attempt the Microsoft AZ-802 practice exam. All operating systems support this format. The third and last format is Administering Windows Server (AZ-802) desktop software that can be used on Windows computers. The customers that have Windows laptops or computers can attempt the practice exam and prepare for it efficiently. These formats are in use by a lot of applicants currently and they are preparing for their best future on daily basis. Even the customers who have used it in the past for the preparation of Microsoft AZ-802 Certification Exam have rated our product as one of the best.
NEW QUESTION # 237
You have a server named Server1 that runs Windows Server. Server1 has a single network interface and the Hyper-V virtual switches shown in the following exhibit. VSwitch1: Private virtual switch VSwitch2: Internal only virtual switch VSwitch3: External virtual switch with the Microsoft Hyper-V Network Adapter bound (management OS shares the adapter) Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point.
Virtual Switch Manager
Answer:
Explanation:
Explanation:
On Server1, you can create additional private and internal virtual switches only. Server1 can access network shares on virtual machines that are connected to VSwitch2 or VSwitch3 only.
Hyper-V supports three virtual switch types: External (bound to a physical network adapter, optionally shared with the management OS), Internal (connects VMs to each other and to the management OS, with no physical adapter binding), and Private (connects VMs to each other only, with no management OS or external connectivity). A single physical network adapter can be bound to only one External virtual switch at a time (absent NIC teaming); because Server1 has only one NIC and it is already bound to VSwitch3 as an External switch, no additional External switch can be created without adding another physical adapter -- but Internal and Private switches, which never bind to a physical NIC, can still be created freely. This means Server1 can create additional private and internal virtual switches only, not additional external switches. For host-to-VM connectivity, the management operating system can communicate with VMs on an Internal switch (VSwitch2) and, because the management OS shares the adapter via the Microsoft Hyper-V Network Adapter, with VMs on the External switch (VSwitch3) as well; the management OS has no network path to VMs on a Private switch (VSwitch1), since Private switches by design isolate VM traffic from the host. Consequently, Server1 can access network shares hosted on VMs connected to VSwitch2 or VSwitch3 only -- not VSwitch1, and not all three switches as the source exhibit ' s highlighting suggested.
NEW QUESTION # 238
You have an Azure subscription. The subscription contains a virtual machine named VM1 that runs Windows Server. You enable Microsoft Defender for Servers Plan 2. You need to implement File Integrity Monitoring (FIM). What should you create first?
Answer: A
Explanation:
File Integrity Monitoring in Microsoft Defender for Cloud, even in its current implementation that is built on top of Microsoft Defender for Endpoint for subscriptions using Defender for Servers Plan 2, still stores the file and registry baseline data and the change events it detects inside a Log Analytics workspace, which an administrator selects or newly creates as part of the process of turning FIM on for a given set of resources.
That Log Analytics workspace must already exist before File Integrity Monitoring ' s monitoring rules and file or registry key entities can be enabled and configured for VM1, making it the essential first prerequisite artifact in this workflow. A data collection rule is a separate Azure Monitor construct used to route telemetry to a destination but is not itself the storage location FIM writes its baseline and change data into, a private endpoint is used to secure network access to a resource such as a storage account or key vault rather than to store FIM data, and a storage account is not the destination FIM ' s current architecture uses at all. Because the Log Analytics workspace is the specific prerequisite resource that File Integrity Monitoring ' s configuration step depends on existing first, creating it is the correct first action to take before implementing FIM on VM1.
NEW QUESTION # 239
Your on-premises network contains an Active Directory Domain Services (AD DS) domain. The domain contains the servers shown in the following table. DC1: Domain naming master, PDC emulator, RID master role holder DC2: Schema master, Infrastructure master role holder RODC1: Read-only domain controller (RODC) Server1: Microsoft Entra Connect sync server Server2: Microsoft Entra Application Proxy connector The domain controllers do NOT have internet connectivity. You plan to implement Microsoft Entra Password Protection for the domain. You need to deploy Microsoft Entra Password Protection agents. The solution must meet the following requirements: * All Microsoft Entra Password Protection policies must be enforced. * Agent updates must be applied automatically. * Administrative effort must be minimized. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Server role table
Answer:
Explanation:
Explanation:
Install the Microsoft Entra Password Protection DC agent on: DC1 and DC2 only; Install the Microsoft Entra Password Protection Proxy on: Server1 Microsoft ' s documentation for Microsoft Entra Password Protection explicitly states that the DC agent does not need to be installed on read-only domain controllers, because password set and change events are never processed or persisted locally on an RODC -- they are always forwarded to a writable domain controller for processing. Installing the DC agent only on the writable domain controllers, DC1 and DC2, is therefore sufficient to enforce password policy for every password operation in the domain, with no benefit (and unnecessary administrative effort) from also installing it on RODC1. Because the domain controllers lack internet connectivity, a Password Protection Proxy is required on an internet-connected, domain-joined member server to relay policy from Microsoft Entra ID down to the DC agents; Microsoft ' s FAQ confirms the Proxy service and Microsoft Entra Connect can coexist on the same server without conflict, so Server1 (already running Entra Connect sync) is a fully supported location. Server2, however, already hosts the Microsoft Entra Application Proxy connector, and Microsoft explicitly recommends against co-locating the Password Protection Proxy with Microsoft Entra Application Proxy, because their installers deploy conflicting versions of the Microsoft Entra Connect Agent Updater service -- the very component responsible for automatic agent updates, which this scenario requires. Placing the Proxy on Server1 therefore satisfies full policy enforcement, automatic updates, and minimal administrative effort, while Server2 is disqualified by the documented Application Proxy conflict.
NEW QUESTION # 240
You have an on-premises server named Server1 that runs Windows Server 2016 and has IIS enabled. Server1 contains an ASP.NET 3.5 app named App1. You have an Azure subscription. You need to use the Azure Migrate App Containerization tool to migrate App1 to Azure App Service. The solution must minimize administrative effort. Which two actions should you perform on Server1 before you use the Azure Migrate App Containerization tool? Each correct answer presents part of the solution. NOTE: Each correct answer is worth one point.
Answer: C,D
Explanation:
The Azure Migrate App Containerization tool, when used for ASP.NET applications, connects to the source IIS server remotely and uses PowerShell remoting over WinRM to discover the application, its IIS configuration, and its dependencies as part of the assessment and containerization workflow, so WinRM and PowerShell remoting must be enabled on Server1 before the tool is able to run this remote discovery step successfully. The App Containerization tool also relies on the Microsoft Web Deploy tool being installed on the application server itself, since Web Deploy is used internally by the tool to package and extract App1 ' s content and configuration during the containerization process, so that tool must be present on Server1 as well before the migration can proceed. Installing .NET Framework 4.8 on Server1 is unnecessary for this scenario, because the Azure Migrate App Containerization tool already fully supports ASP.NET applications built on .
NET Framework 3.5 or any later version, so App1 does not need to be upgraded to a newer .NET Framework version just to be discovered and containerized. There is also no requirement in this workflow to separately enable remote administration for IIS itself, since the tool ' s discovery process relies on PowerShell remoting rather than on IIS Manager ' s own remote administration feature, so enabling PowerShell remoting and installing Web Deploy are the two correct prerequisite actions.
NEW QUESTION # 241
Your network contains an Active Directory domain named contoso.com. The domain contains the computers shown in the following table: Computer1 (Windows 11), Server1 (Windows Server 2016), Server2 (Windows Server 2019), Server3 (Windows Server 2022). On Server3, you create a Group Policy Object (GPO) named GPO1 and link GPO1 to contoso.com. GPO1 includes a shortcut preference named Shortcut1 that has item- level targeting configured to apply only when the operating system is Windows Server 2022 Family. To which computer will Shortcut1 be applied?
Computer/OS table
Item-level targeting editor
Answer: C
Explanation:
GPO1 is linked at the domain level (contoso.com), so without any further restriction it would normally apply to every computer object in the domain, including Computer1, Server1, Server2, and Server3. However, the shortcut preference item Shortcut1 has item-level targeting configured with an operating system targeting condition that requires the processing computer ' s operating system to match " Windows Server 2022 Family
" -- this is evaluated locally on each targeted computer during Group Policy preference processing, and the preference item is applied only when the condition evaluates to true for that specific computer; if the condition fails, the client-side extension simply skips applying that particular preference item on that computer, while the rest of the GPO (if it had other, non-targeted settings) would still apply normally.
Checking each computer ' s operating system against the table: Computer1 runs Windows 11 (fails the condition), Server1 runs Windows Server 2016 (fails), Server2 runs Windows Server 2019 (fails), and Server3 runs Windows Server 2022 (matches the " Windows Server 2022 Family " condition). Therefore, even though GPO1 itself is linked domain-wide and would otherwise reach all four computers, the item-level targeting on Shortcut1 restricts its actual application to Server3 only.
NEW QUESTION # 242
......
In such society where all people take the time so precious, choosing Real4dumps to help you pass the Microsoft Certification AZ-802 Exam is cost-effective. If you choose Real4dumps, we promise that we will try our best to help you pass the exam and also provide you with one year free update service. If you fail the exam, we will give you a full refund.
AZ-802 Reliable Test Guide: https://www.real4dumps.com/AZ-802_examcollection.html