DOWNLOAD the newest ExamDumpsVCE JN0-364 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1Yrmz0NpsGI_iMNc7qfb6zwB-e718mIK1
The Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam questions are being offered in three different formats. The names of these formats are JN0-364 desktop practice test software, web-based practice test software, and PDF dumps file. The JN0-364 desktop practice test software and web-based practice test software both give you real-time Juniper JN0-364 exam environment for quick and complete exam preparation.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Protocol-Independent Routing | 10-15% | - Martian addresses - Routing instances and RIB groups - Filter-based forwarding - Load balancing - Static, aggregate, and generated routes |
| Topic 2: High Availability | 5-8% | - Graceful restart - NSR and GRES concepts - Nonstop active routing |
| Topic 3: Border Gateway Protocol (BGP) | 20-25% | - Path selection and attributes - Configuration and troubleshooting - Basic operation and message types - Policy and route filtering - IBGP and EBGP |
| Topic 4: Multiprotocol Label Switching (MPLS) | 12-18% | - Segment routing basics - Terminology and forwarding - Configuration and monitoring - LDP and RSVP - Labels and LIB |
| Topic 5: Tunnels | 5-8% | - GRE and IP-IP tunnels - Tunnel configuration and usage |
| Topic 6: Open Shortest Path First (OSPF) | 15-20% | - Link-state database - LSA types and operation - Configuration and troubleshooting - Areas and router types |
| Topic 7: Intermediate System to Intermediate System (IS-IS) | 10-15% | - Metrics and wide metrics - Adjacencies and levels - PDUs and TLVs - Configuration and monitoring |
| Topic 8: Spanning Tree Protocols | 8-12% | - BPDU and protection features - Configuration and convergence - STP, RSTP, MSTP, VSTP - Port roles and states |
| Topic 9: IPv6 | 8-12% | - OSPFv3 and BGP for IPv6 - Address types and format - Static and dynamic routing - Autoconfiguration |
| Topic 10: Layer 2 Bridging and VLANs | 8-12% | - VLANs and trunking - Service provider switching features - Bridging concepts |
>> Valid JN0-364 Exam Format <<
Forget complaining for your failure. Please think about why there are candidates to pass exam every day. Option is more important than effort sometimes. Juniper JN0-364 reliable exam collection pdf are being searched about 100,000 in the website every day. There are more than 600 candidates choosing valid Juniper JN0-364 reliable exam collection pdf every day. We help thousands of people clear exams every year. The success is close at hand, why do you grab it?
NEW QUESTION # 43
Exhibit:
user@R2> show route 198.51.100.1
inet.0: 19 destinations, 19 routes (19 active, 0 holddown, 0 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
198.51.100.1/32 *[Static/5] 5d 21:02:26
> to 203.0.113.65 via ge-0/0/3.0
user@R2> show route 172.20.110.0/24
inet.0: 19 destinations, 19 routes (19 active, 0 holddown, 0 hidden)
Restart Complete
+ = Active Route, - = Last Active,
* = Both
172.20.110.0/24 *[Static/5] 10:43:01
> via gr-0/0/0.0
Referring to the exhibit, traffic destined to which network will be sent through the tunnel?
Answer: A
Explanation:
To determine which traffic is being sent through a tunnel in a Junos OS environment, an administrator must analyze the routing table output for the exit interface associated with each destination prefix. The provided exhibit shows the results of the show route command on routerR2for two specific destination networks.
In the first output, the destination198.51.100.1/32is an active static route. The next-hop information specifies that traffic for this address is sent to the gateway 203.0.113.65 via the interfacege-0/0/3.0. According to Juniper Networks interface naming conventions, the prefixge-denotes aGigabit Ethernetinterface, which represents a standard physical connection. Therefore, this traffic does not traverse a tunnel.
In the second output, the destination172.20.110.0/24is also an active static route. However, the next-hop for this network is listed asvia gr-0/0/0.0. In the Junos operating system, thegr-prefix explicitly identifies a Generic Routing Encapsulation (GRE) tunnel interface. GRE is a widely used protocol in service provider networks to encapsulate various network layer protocols over an IP backbone, effectively creating a virtual point-to-point link. Because the routing table has installed the route for 172.20.110.0/24 specifically via the gr- interface, all traffic destined for this network will be encapsulated and sent through the tunnel.
The other choices are incorrect for the following reasons:
* 203.0.113.65 (Option B):This is the next-hop IP address for the physical Gigabit Ethernet path; it is not a destination network directed to a tunnel.
* 0.0.0.0/0 (Option C):There is no information in the exhibit regarding a default route.
* 198.51.100.1/32 (Option D):As identified by thege-interface prefix in the exhibit, traffic for this destination is sent via a physical Ethernet link.
NEW QUESTION # 44
Click the Exhibit button.
Referring to the exhibit, R1 and R2 are advertising the same prefix 203.0.113.0/24 to R3 and R4 over EBGP. R3 and R4 both advertise this prefix to R5.
Which advertisement does R5 choose to install in its routing table?
Answer: B
Explanation:
R3 and R4 both advertise the same prefix into iBGP toward R5, but they assign different local preference values. R3 sets a local preference of 150, while R4 sets a local preference of 200.
Since BGP selects routes with the highest local preference before considering other attributes, R5 chooses the route received from R4 and installs it in its routing table.
NEW QUESTION # 45
Which two statements ate correct about the BGP next-hop attribute value? (Choose two.)
Answer: A,C
Explanation:
By default, the router that originally sourced the route into BGP places its peer address into the attribute field. The next-hop value is then typically changed when the route is transmitted across external gGP (EBGP) links. Internal BGP (IBGP) peers do not alter the next-hop value between themselves.
NEW QUESTION # 46
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
Answer: C,D
Explanation:
All listed ports are in the designated role and forwarding state, and the designated bridge ID shown matches the local bridge ID, which indicates the device is acting as the root bridge for this spanning-tree instance.
The bridge ID begins with 32768, which corresponds to the default bridge priority of 32,768 (32k).
NEW QUESTION # 47
In an OSPF network, what is a purpose of a designated router?
Answer: A
Explanation:
A designated router is elected on multiaccess OSPF networks to minimize the number of adjacencies and reduce the amount of OSPF control traffic. Instead of every router forming a full adjacency with every other router on the segment, routers form adjacencies with the designated router, which then manages the distribution of link-state updates on that segment.
NEW QUESTION # 48
......
Our JN0-364 exam torrent boosts 3 versions and they include PDF version, PC version, and APP online version. The 3 versions boost their each strength and using method. For example, the PC version of JN0-364 exam torrent boosts installation software application, simulates the Real JN0-364 Exam, supports MS operating system and boosts 2 modes for practice and you can practice offline at any time. You can learn the APP online version of JN0-364 guide torrent in the computers, cellphones and laptops and you can choose the most convenient method to learn.
JN0-364 Exam Pattern: https://www.examdumpsvce.com/JN0-364-valid-exam-dumps.html
DOWNLOAD the newest ExamDumpsVCE JN0-364 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1Yrmz0NpsGI_iMNc7qfb6zwB-e718mIK1