The VNX301 online exam simulator is the best way to prepare for the VNX301 exam. Getcertkey has a huge selection of VNX301 dumps and topics that you can choose from. The Versa Networks Exam Questions are categorized into specific areas, letting you focus on the VNX301 subject areas you need to work on. Additionally, Versa Networks VNX301 exam dumps are constantly updated with new VNX301 questions to ensure you're always prepared for VNX301 exam.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
>> VNX301 Testking Learning Materials <<
Furthermore, Getcertkey is a very responsible and trustworthy platform dedicated to certifying you as a Ariba specialist. We provide a free sample before purchasing Versa Networks VNX301 valid questions so that you may try and be happy with its varied quality features. Learn for your Versa Networks certification with confidence by utilizing the Getcertkey VNX301 Study Guide, which is always forward-thinking, convenient, current, and dependable.
NEW QUESTION # 22
Examine the exhibit below.
You are onboarding the SOLDEU-R2 branch device using the staging script. You cannot get a Versa- Provider-Controller-VR IP address assigned, indicating that the IPsec tunnel to the corrector has not come up.
You verified that the cables have been connected to the correct ports.
What has caused this issue?
Answer: C
Explanation:
The issue is caused by specifying the incorrect WAN port in the staging script. In the exhibit, the SOLDEU- R2 branch is physically connected to the Internet cloud through vni-0/0 , while vni-0/1 is shown as the inter- device link toward SOLDEU-R1. However, the show interfaces brief output shows that the WAN IP address
192.168.122.121/24 has been assigned to vni-0/1.0 , not to the Internet-facing interface. Since the cables are confirmed to be connected correctly, the mismatch must be in the staging script interface selection, not in the cabling.
Versa documentation states that during SD-WAN staging, the branch establishes an IKE session with the Controller, and after that the Controller assigns an IP address to the branch device. Versa troubleshooting guidance also states that after transport connectivity to the Controller is established, the branch forms IKE-based IPsec connectivity, and if this succeeds, the ptvi interface toward the Controller comes up. If IKE/IPsec fails, the ptvi interface remains down. Because the staged WAN IP is placed on the wrong VNI interface, the branch cannot reach the Controller over the intended Internet transport, so the Controller tunnel does not come up.
NEW QUESTION # 23
Examine the exhibit below.
According to the CGNAT pool configuration shown in the exhibit, which two statements are true? (Choose two.)
Answer: A,D
Explanation:
The exhibit shows the Add CGNAT Pool configuration with the IP Address/Range option selected. The configured address range is named Visitors , with a low address of 192.168.10.100 and a high address of
192.168.10.150 . In CGNAT, this pool defines the translated source address resource used by matching NAT rules; it does not define the original inside source hosts. Therefore, matching sessions will have their source address translated to an address from this configured pool range, which makes option C correct. Versa's CGNAT configuration examples show that a rule matches original source and destination prefixes, and then attaches a translated source pool to perform NAT.
NEW QUESTION # 24
Examine the exhibit below.
Referring to the exhibit, which two statements are correct? (Choose two.)
Answer: A,C
Explanation:
The correct answers are A and B . In the exhibit, the LAN interface shows a fixed VLAN ID value of 100 .
Because this value is directly configured in the template rather than represented as a per-device variable, every branch that uses this template will receive the same LAN VLAN ID. This supports option A. Versa configuration examples show that VLAN-tagged interfaces are created by defining logical units with a vlan- id, and organizations then use those tagged interfaces for traffic identification and routing services.
For the MPLS WAN network , the VLAN ID field is shown as a variable or bind-data style value rather than a fixed number. This allows each branch device to receive a different MPLS VLAN ID during onboarding, depending on the branch-specific values supplied in the workflow or device bind data. Therefore, branches can have separate VLAN IDs on the MPLS WAN transport, which supports option B. Versa SD-WAN troubleshooting output also shows WAN interfaces as logical VNI subinterfaces, such as vni-0/1.0 and vni-0/2.
0, mapped to SD-WAN transport networks like INET and MPLS.
Option C is incorrect because an INET interface can be untagged, commonly represented with VLAN ID 0. Option D is incorrect because the MPLS VLAN field is intentionally parameterized, not incorrectly configured.
NEW QUESTION # 25
Examine the exhibit below.
You are configuring an IPsec tunnel towards a non-SD-WAN site over the INETTransport-VR. The site IP address is 10.1.1.1. This tunnel is for traffic between the 192.168.100.0/24 and the 192.168.200.0/24 LAN networks. The tunnel does not establish.
Referring to the exhibit, which statement is correct?
Answer: C
Explanation:
The correct answer is A . The exhibit shows that the IPsec VPN is being configured with Tunnel Routing Instance: XIAN-Control-VR . However, the question states that the tunnel is toward a non-SD-WAN site over the INET-Transport-VR . For a site-to-site IPsec tunnel, the tunnel routing instance must match the routing instance used to reach the peer public IP address. In this case, the remote non-SD-WAN peer is
10.1.1.1 , and the intended underlay transport is INET-Transport-VR , not the Control VR.
Versa troubleshooting documentation explains that routing instances are used to define where traffic is sourced and forwarded. For example, configuration examples select routing instances when enabling services or initiating tests, and traffic must use the correct WAN or transport routing instance to reach the remote endpoint. Versa branch troubleshooting also emphasizes that after transport connectivity is available, the branch establishes IKE-based IPsec connectivity; if that connectivity fails, the IPsec-related interface remains down.
Changing the routing instance to global would not be correct because the intended path is specifically INET-Transport-VR. A higher precedence value is not required to establish the tunnel. The policy selector shown already defines local-to-remote interesting traffic, and the key failure is the incorrect tunnel routing instance.
NEW QUESTION # 26
Examine the exhibit below.
An SD-WAN administrator has configured Direct Internet Access (DIA) for INET and INET-2 and wants to use SaaS Application Monitoring and SD-WAN policies to steer certain applications to the best Internet path on a certain VOS device.
Which two statements are true regarding the configuration shown in the exhibit? (Choose two.)
Answer: A,D
Explanation:
The correct answers are B and D . In the exhibit, the Next-Hop Selection Method is configured as Load Balance , and both INET and INET-2 have the same next-hop priority value of 1 . Versa SD-WAN guidance states that load balancing between WAN paths is achieved by configuring at least two circuits with equal priority. Therefore, when both INET and INET-2 satisfy the SLA requirements, sessions can be load-balanced across those two internet circuits.
Option D is also correct because the exhibit shows SLA Violation Action: Forward . This means that if no next hop is SLA-compliant, the VOS device is still allowed to forward traffic instead of dropping it. This behavior is consistent with Versa SD-WAN traffic-steering concepts, where forwarding profiles define circuit or path priorities, connection methods, load-balancing behavior, and SLA handling for traffic that matches an SD-WAN policy.
Option A is incorrect because the exhibit does not use the Automatic next-hop selection method. Versa' s performance-based SaaS optimization uses monitoring metrics to select the best path when configured for automatic/performance-based selection, but this exhibit shows Load Balance instead. Option C is not the best answer because LTE has lower priority 2 and would be considered only after the higher- priority INET and INET-2 paths are unavailable or unusable, not merely when one INET circuit fails.
NEW QUESTION # 27
......
In order to let you understand our products in detail, our Versa Certified SD-WAN Specialist (VNX300) test torrent has a free trail service for all customers. You can download the trail version of our VNX301 study torrent before you buy our products, you will develop a better understanding of our products by the trail version. In addition, the buying process of our VNX301 exam prep is very convenient and significant. You will receive the email from our company in 5 to 10 minutes after you pay successfully; you just need to click on the link and log in, then you can start to use our VNX301 study torrent for studying. Immediate download after pay successfully is a main virtue of our Versa Certified SD-WAN Specialist (VNX300) test torrent. At the same time, you will have the chance to enjoy the 24-hours online service if you purchase our products, so we can make sure that we will provide you with an attentive service.
VNX301 Excellect Pass Rate: https://www.getcertkey.com/VNX301_braindumps.html