P.S. Free & New NCP-MCI-7.5 dumps are available on Google Drive shared by DumpsTorrent: https://drive.google.com/open?id=1PrIJYmxyrWfA5nRH7CXSKcBELDBL21v_
As is known to us, the leading status of the knowledge-based economy has been established progressively. It is more and more important for us to keep pace with the changeable world and improve ourselves for the beautiful life. Our company can help you solve the problem and get your certification, because our company has compiled the NCP-MCI-7.5 question torrent that not only have high quality but also have high pass rate. We believe that our NCP-MCI-7.5 exam questions will help you get the certification in the shortest. So hurry to buy our NCP-MCI-7.5 exam torrent, you will like our products.
| Section | Weight | Objectives |
|---|---|---|
| Disaster Recovery and Data Protection | 20% | - Business continuity planning
|
| Monitoring and Troubleshooting | 20% | - Troubleshooting methodology
|
| Advanced Operations | 10% | - Prism Central administration
|
| Cluster Management | 25% | - Deploy and configure clusters
|
| VM Management | 25% | - VM deployment and configuration
|
If you want a relevant and precise content that imparts you the most updated, relevant and practical knowledge on all the key topics of the Nutanix Certification exam, no other study material meets these demands so perfectly as does DumpsTorrent’s study guides. The NCP-MCI-7.5 questions and answers in these guides have been prepared by the best professionals who have deep exposure of the certification exams and the exam takers needs. The result is that NCP-MCI-7.5 Study Guides are liked by so many ambitious professionals who give them first priority for their exams. The astonishing success rate of NCP-MCI-7.5clients is enough to prove the quality and benefit of the study questions of NCP-MCI-7.5.
NEW QUESTION # 25
An employee is complaining that a VM is slow. Memory overcommit is enabled for this VM. Though the VM is actively using all its allocated memory, the guest OS pagefile % Usage is very low.
What is the probable cause for this VM being slow?
Answer: A
Explanation:
The key clue is the mismatch between the VM being slow under memory overcommit and the guest OS pagefile usage remaining low. If the guest itself were under strong memory pressure, you would expect higher pagefile or swap-file activity inside the OS. Instead, the symptoms suggest memory reclamation is happening outside the guest, which points to hypervisor swapping. In Nutanix AHV terms, that means the platform is reclaiming memory at the virtualization layer, causing performance degradation even though the guest does not show heavy internal paging. Therefore C is the most likely cause.
The distractors are weaker. "CVM swapping" would indicate pressure in the storage/control path VM, not necessarily this guest's memory experience. Ballooning and swapping are not mutually exclusive, and the question's evidence does not specifically prove ballooning is disabled. This is a troubleshooting pattern- recognition question: slow VM, full memory use, low guest pagefile use, and overcommit enabled usually indicates the hypervisor is swapping, so C is the best answer.
NEW QUESTION # 26
The administrator observed the following NCC check in a cluster running VDI workloads:
ec_enablement_check:
Node XX.XX.XX.XX:
INFO: Consider enabling erasure coding on container SelfServiceContainer to get 26% space savings.
INFO: Consider enabling erasure coding on container default-container203943 to get 22% space savings.
What is the best course of action?
Answer: C
Explanation:
Nutanix's NCC ec_enablement_check identifies containers where erasure coding could save space, but administrators still need to apply judgment based on workload behavior. In a VDI environment, user-created or self-service clone data may be a strong fit for EC, while the default container may host a wider mix of system, transient, or write-active workloads where capacity efficiency is not always the first priority. Since the recommendation is informational rather than mandatory, the best answer is to enable EC on the container that is the better fit and leave the more general default container unchanged. That makes D the most balanced answer.
This question is testing operational discretion. "Enable EC everywhere NCC mentions" is too simplistic.
Erasure coding is highly effective for suitable RF2/RF3 workloads, but the default container often ends up holding broad-purpose content that administrators may deliberately leave on non-EC settings depending on I
/O profile and design standards. The "SelfServiceContainer" is the more targeted candidate here, so D best reflects Nutanix-minded administration rather than blind automation.
NEW QUESTION # 27
An administrator needs to be able to use remaining capacity for storage and memory.
What settings should the administrator set to accomplish this?
Answer: D
Explanation:
Nutanix separates storage resiliency reservation from compute high availability. For storage, the relevant setting is Rebuild Capacity Reservation, which reserves storage space so the cluster can self-heal and rebuild after node, block, or rack failure. For memory and compute, the relevant concept is High Availability, which reserves or accounts for host resources needed to restart workloads after a host failure. Putting those together gives the combination that best governs the remaining usable storage and memory capacity while preserving fault tolerance. That makes C the most correct answer.
The distractors either use non-standard phrasing or split the concepts incorrectly. "Memory Reservation" by itself is not the standard Nutanix answer when the exam is asking about cluster-wide restart capacity and usable memory after failure accounting. Nutanix administrators think in terms of HA for compute-memory protection and rebuild capacity reservation for storage protection. If the goal is to manage the usable remaining capacity for both storage and memory correctly, the right pair is Rebuild Capacity Reservation and High Availability. Therefore C is the authentic answer.
NEW QUESTION # 28
A VM is protected by a protection policy and the volume group is configured with CHAP authentication. An administrator rotates the VM's password as part of the monthly routine. What action must the administrator perform to ensure the password is retained in the event of a failover?
Answer: D
Explanation:
For CHAP-protected volume groups, Nutanix documentation is explicit that when the target password is changed, the administrator must also update the associated recovery plan. Nutanix states that if the new target password is not updated in the recovery plan, it is not retained after failover. That makes the recovery plan the place where the failover-side credential continuity is preserved. In other words, protection policies create and replicate recovery points, but the recovery plan contains the information needed for the recovered application workflow, including CHAP details needed after recovery. ( Nutanix Portal ) This is an important exam distinction: protection policy controls snapshot and replication behavior, while recovery plan controls recovery orchestration and the settings needed when workloads are actually brought online at the target site. Recovery points themselves are snapshots of protected entities; they are not the administrative mechanism Nutanix documents for persisting an updated CHAP target password through failover. So even though the uploaded file says option D, the official Nutanix guidance supports A. For failover success with CHAP-enabled VGs, always synchronize password changes with the recovery plan. ( Nutanix Portal )
NEW QUESTION # 29
An administrator has configured a virtual switch with Active-Active bond type with MAC pinning (balance- slb) bond type. The network team enables LACP on the top-of-rack switches connected to the Nutanix nodes.
After the switch change, network throughput degrades.
What is the most likely cause?
Answer: D
Explanation:
Nutanix networking guidance makes this distinction very clearly: balance-slb (Active-Active with MAC pinning) is the bond type used when the administrator wants multi-uplink utilization without additional physical-switch configuration. Nutanix also documents that LACP requires Active-Active / balance-tcp, and balance-slb must not be combined with link aggregation protocols such as LACP. If the switch team turns on LACP while the Nutanix side remains in balance-slb, the uplink behavior is mismatched and degraded throughput is the expected result. Therefore D is the correct answer.
This is a classic exam trap because both balance-slb and balance-tcp are Active-Active styles, but they are not interchangeable. One is switch-independent and the other is switch-dependent with LACP. The problem here is not MTU, uplink count, or support for vs0. It is the fact that the switch configuration and AHV bond mode no longer agree. In Nutanix, if LACP is enabled on the switches, the virtual switch must be configured for the LACP-compatible Active-Active mode, not MAC pinning. That is why D is the authentic answer.
NEW QUESTION # 30
......
Our Nutanix Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) 7.5 web-based practice test software has all the specifications of the desktop Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) 7.5 practice exam software. This web-based Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) 7.5 (NCP-MCI-7.5) practice test software doesn't need any installation or plugins. You can attempt the Nutanix Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) 7.5 web-based practice test using Chrome, Firefox, Opera, Internet Explorer, or Nutanix Edge. Our browser-based Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) 7.5 (NCP-MCI-7.5) practice exam software is also compatible with Windows, Mac, Linux, Android, and iOS.
NCP-MCI-7.5 Reliable Dump: https://www.dumpstorrent.com/NCP-MCI-7.5-exam-dumps-torrent.html
What's more, part of that DumpsTorrent NCP-MCI-7.5 dumps now are free: https://drive.google.com/open?id=1PrIJYmxyrWfA5nRH7CXSKcBELDBL21v_