H35-581_V2.0 Exam Quizzes | H35-581_V2.0 Exams Dumps

To make sure you have all the practice you need, our H35-581_V2.0 practice test also includes numerous opportunities for you to put your skills to the H35-581_V2.0 test. Our Huawei H35-581_V2.0 practice exams simulate the real thing, so you can experience the pressure and environment of the actual HCIP-5G-RNP&RNO V2.0 (H35-581_V2.0) test before the day arrives. You'll receive detailed feedback on your performance, so you know what areas to focus on and improve. At the Exams4sures, we're committed to your success and believe in the effectiveness of our H35-581_V2.0 exam dumps.

Huawei H35-581_V2.0 (HCIP-5G-RNP&RNO V2.0) Certification Exam is designed for IT professionals who are responsible for planning, designing, and optimizing 5G Radio Network Planning (RNP) and Radio Network Optimization (RNO). H35-581_V2.0 Exam covers a range of topics related to 5G RNP and RNO, including 5G network architecture, 5G network planning and optimization, 5G network performance management, and 5G network troubleshooting.

>> H35-581_V2.0 Exam Quizzes <<

H35-581_V2.0 Exams Dumps - Reliable H35-581_V2.0 Real Exam

You must want to receive our H35-581_V2.0 practice questions at the first time after payment. Don’t worry. As long as you finish your payment, our online workers will handle your orders of the H35-581_V2.0 study materials quickly. The whole payment process lasts a few seconds. And if you haven't received our H35-581_V2.0 Exam Braindumps in time or there are some trouble in opening or downloading the file, you can contact us right away, and our technicals will help you solve it in the first time.

Huawei H35-581_V2.0 certification exam is a challenging exam that requires extensive knowledge of 5G network planning and optimization. HCIP-5G-RNP&RNO V2.0 certification exam covers a wide range of topics related to 5G network planning and optimization, including network architecture, radio frequency planning, and optimization techniques. HCIP-5G-RNP&RNO V2.0 certification exam is designed to test the candidate's ability to design, deploy, and optimize 5G networks.

The Huawei H35-581_V2.0 Exam focuses on the practical aspects of 5G network planning and optimization. It covers topics such as network design, deployment, and testing. The section also covers the use of different tools and techniques for network performance testing and optimization.

Huawei HCIP-5G-RNP&RNO V2.0 Sample Questions (Q54-Q59):

NEW QUESTION # 54
Which of the following MCS indices is required for 256QAM scheduling in downlink peak-rate testing?

Answer: D

Explanation:
MCS index 27 is the expected answer because it represents the highest non-reserved spectral-efficiency entry in the conventional NR PDSCH MCS table supporting 256QAM.
The Modulation and Coding Scheme (MCS) determines the modulation order and target coding rate used for scheduled data transmission.
For 256QAM, the modulation order is Q_m=8, meaning eight coded bits are mapped to each modulation symbol.
According to 3GPP TS 38.214, Table 5.1.3.1-2, MCS index 27 uses modulation order 8 and a target coding- rate parameter of 948/1024.
Its spectral efficiency is approximately 7.4063 bits per resource element before applicable resource overheads.
This makes index 27 particularly relevant when evaluating maximum downlink throughput under favorable radio conditions.
However, an important distinction exists between enabling 256QAM and achieving maximum spectral efficiency.
MCS index 23 also uses 256QAM, with a target coding-rate parameter of 797/1024 and a lower spectral efficiency of approximately 6.2266.
Therefore, both indices 23 and 27 can represent 256QAM modulation, but index 27 provides the higher nominal spectral efficiency.
MCS index 28 is reserved in the referenced table, while index 32 is outside the five-bit MCS index range.
Consequently, B is correct for maximum peak-rate testing.
Official Reference: 3GPP TS 38.214, Section 5.1.3.1, Table 5.1.3.1-2, MCS Index Table 2 for PDSCH .
Technical warning / qualification: Option D also represents 256QAM. The question is unambiguous only if peak-rate testing means selecting the highest non-reserved spectral-efficiency entry. The wording should explicitly state this condition.


NEW QUESTION # 55
Which of the following layers is responsible for concatenating RLC PDUs?

Answer: B

Explanation:
The Medium Access Control (MAC) layer is responsible for multiplexing multiple RLC PDUs into a MAC PDU for transmission over the physical transport channel.
In the 5G NR protocol architecture, the Radio Link Control (RLC) layer processes data received from upper protocol layers and constructs RLC PDUs.
RLC supports segmentation and reassembly of RLC Service Data Units (SDUs), depending on the configured RLC operating mode.
However, the NR RLC layer does not perform concatenation of multiple independent RLC SDUs into one RLC PDU in the manner associated with earlier LTE RLC processing.
Instead, each RLC SDU is used to construct an RLC PDU, or is segmented into multiple RLC PDUs when necessary.
These RLC PDUs are subsequently delivered to the MAC layer.
From the MAC perspective, an RLC PDU is received as a MAC SDU. The MAC multiplexing procedure can combine MAC SDUs belonging to one or several logical channels into a single MAC PDU.
The MAC PDU is then transferred to the physical layer through the corresponding transport channel.
PDCP performs functions such as sequence numbering, ciphering, and header compression where applicable.
PHY performs physical-channel processing, modulation, and transmission.
Therefore, option C correctly identifies the layer responsible for combining multiple RLC PDUs for transmission.
Official Reference: 3GPP TS 38.321, Section 4.4, MAC Functions ; TS 38.322, Sections 4.2 and 5, RLC Sublayer and Data Transfer Procedures .


NEW QUESTION # 56
For type 0 allocation, bitmaps are used to map resources, and this is applicable to downlink scheduling with a small amount of data because the minimum scheduling unit for this type is one RBG.

Answer: B

Explanation:
The statement is false in the intended examination context because resource allocation type 0 uses Resource Block Group (RBG) granularity, which is generally coarser than the individual Resource Block (RB) allocation granularity available through type 1.
In NR downlink scheduling, the gNodeB allocates Physical Downlink Shared Channel (PDSCH) resources according to the configured frequency-domain resource-allocation method.
According to 3GPP TS 38.214, type 0 allocation uses a bitmap in which each bit indicates whether a corresponding RBG is assigned to the scheduled UE.
An RBG normally contains multiple consecutive RBs, with its nominal size determined by the Bandwidth Part (BWP) size and the configured RBG-size parameter.
For example, standardized nominal RBG sizes include 2, 4, 8, and 16 RBs.
Type 0 supports flexible selection of adjacent or nonadjacent RBGs, making it useful for scheduling across separated frequency-domain resources.
However, it may allocate more bandwidth than necessary when only a small amount of data must be transmitted.
Type 1 allocation identifies a starting RB and a contiguous allocation length, permitting finer control of the assigned resource quantity.
Therefore, type 0 is not inherently preferable for small-data scheduling merely because its minimum normal allocation is one RBG.
Official Reference: 3GPP TS 38.214, Sections 5.1.2.2.1 and 5.1.2.2.2, Downlink Resource Allocation Types
0 and 1 .
Technical warning / qualification: Type 0 is not prohibited for small packets. The incorrect part is the conclusion that RBG-level granularity makes it particularly suitable for small-data scheduling.


NEW QUESTION # 57
Which of the following channels or signals support closed-loop power control?
Select All that Apply

Answer: B,D

Explanation:
The Physical Uplink Shared Channel (PUSCH) and Physical Uplink Control Channel (PUCCH) support closed-loop transmit-power control in 5G NR.
Closed-loop power control enables the gNodeB to adjust UE transmission power dynamically according to radio-channel conditions, received signal quality, and interference-management requirements.
Option A - PUSCH: The PUSCH carries uplink user data and selected control information. Its transmit- power calculation combines configured open-loop parameters with closed-loop power adjustments communicated through Transmit Power Control (TPC) commands.
These adjustments help maintain reliable uplink reception while limiting unnecessary UE power consumption and inter-cell interference.
Option D - PUCCH: The PUCCH carries uplink control information, including HARQ acknowledgments, scheduling requests, and CSI reports. Its power-control procedure also incorporates TPC commands and the corresponding closed-loop adjustment state.
Option B - PRACH: PRACH uses a random-access transmit-power calculation and power-ramping mechanism. It does not use the conventional PUSCH/PUCCH closed-loop TPC procedure.
Option C - PBCH: PBCH is a downlink broadcast channel transmitted by the gNodeB, so UE uplink closed-loop power control does not apply.
Therefore, PUSCH and PUCCH are the correct selections.
Official Reference: 3GPP TS 38.213, Sections 7.1.1 and 7.2.1, PUSCH and PUCCH Transmit Power Control
; TS 38.321, Random Access Procedure .


NEW QUESTION # 58
The NG interface between the 5G gNodeB and the core network is IP-network based. Which of the following protocols is used on the control plane?

Answer: A

Explanation:
Stream Control Transmission Protocol (SCTP) is the correct answer because it provides the transport-layer signaling service used by the NG control-plane interface between the gNodeB and the 5G Core.
In 5G Standalone (SA) architecture, the NG interface consists of two principal components: NG-C and NG-U.
NG-C connects the NG-RAN node to the Access and Mobility Management Function (AMF) and carries Next Generation Application Protocol (NGAP) signaling.
NGAP supports procedures such as initial UE message transfer, UE context management, handover coordination, paging, and PDU session resource management.
According to 3GPP TS 38.412, NGAP messages are transported using SCTP over IP.
SCTP provides reliable message delivery, multiple independent streams, congestion control, and multihoming capabilities.
These characteristics are particularly useful for maintaining signaling reliability and transport-network resilience.
The remaining options have different functions.
UDP provides connectionless transport and is used beneath GTP-U for applicable user-plane traffic.
GTP-U carries user-plane packets between the NG-RAN and UPF over the NG-U interface.
X2-C identifies the LTE X2 control-plane interface rather than the NG control-plane transport protocol.
Therefore, SCTP is the correct choice for the NG-C transport layer.
Official Reference: 3GPP TS 38.412, Sections 4.1 and 7, NG Signalling Bearer Protocol Stack and Transport Layer ; TS 38.410, NG Interface General Aspects .


NEW QUESTION # 59
......

H35-581_V2.0 Exams Dumps: https://www.exams4sures.com/Huawei/H35-581_V2.0-practice-exam-dumps.html