P.S. Free 2026 Juniper JN0-364 dumps are available on Google Drive shared by Prep4pass: https://drive.google.com/open?id=1UK9x7geiixh-hrkhjRuRInb75E11cUz3
If you try to free download the demos on the website, and you will be amazed by our excellent JN0-364 preparation engine. We can absolutely guarantee that even if the first time to take the exam, candidates can pass smoothly. You can find the latest version of JN0-364 Practice Guide in our website and you can practice JN0-364 study materials in advance correctly and assuredly. The following passages are their advantages for your information
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Protocol-Independent Routing | 10-15% | - Load balancing - Martian addresses - Filter-based forwarding - Routing instances and RIB groups - Static, aggregate, and generated routes |
| Topic 2: Border Gateway Protocol (BGP) | 20-25% | - IBGP and EBGP - Path selection and attributes - Basic operation and message types - Configuration and troubleshooting - Policy and route filtering |
| Topic 3: Multiprotocol Label Switching (MPLS) | 12-18% | - Segment routing basics - Terminology and forwarding - Labels and LIB - LDP and RSVP - Configuration and monitoring |
| Topic 4: IPv6 | 8-12% | - OSPFv3 and BGP for IPv6 - Static and dynamic routing - Address types and format - Autoconfiguration |
| Topic 5: Open Shortest Path First (OSPF) | 15-20% | - Configuration and troubleshooting - LSA types and operation - Link-state database - Areas and router types |
| Topic 6: Intermediate System to Intermediate System (IS-IS) | 10-15% | - PDUs and TLVs - Adjacencies and levels - Metrics and wide metrics - Configuration and monitoring |
| Topic 7: Layer 2 Bridging and VLANs | 8-12% | - VLANs and trunking - Bridging concepts - Service provider switching features |
| Topic 8: Tunnels | 5-8% | - Tunnel configuration and usage - GRE and IP-IP tunnels |
| Topic 9: High Availability | 5-8% | - Graceful restart - Nonstop active routing - NSR and GRES concepts |
| Topic 10: Spanning Tree Protocols | 8-12% | - BPDU and protection features - Port roles and states - Configuration and convergence - STP, RSTP, MSTP, VSTP |
JN0-364 test questions have a mock examination system with a timing function, which provides you with the same examination environment as the real exam. Although some of the hard copy materials contain mock examination papers, they do not have the automatic timekeeping system. Therefore, it is difficult for them to bring the students into a real test state. With JN0-364 Exam Guide, you can perform the same computer operations as the real exam, completely taking you into the state of the actual exam, which will help you to predict the problems that may occur during the exam, and let you familiarize yourself with the exam operation in advance and avoid rushing during exams.
NEW QUESTION # 152
The MPLS Label Information Base (LIB) is stored in which table?
Answer: C
Explanation:
The MPLS Label Information Base is maintained in the mpls.0 routing table. This table stores the mappings between MPLS labels and their corresponding forwarding actions, allowing the router to perform label switching for MPLS packets.
NEW QUESTION # 153
What is the default route preference for an aggregate route?
Answer: C
Explanation:
In the Junos OS architecture,route preference(often referred to as administrative distance in other vendor platforms) is the primary metric used by the Routing Engine to select the "best" path when multiple protocols provide a route to the same destination. Each routing protocol and route type is assigned a default numeric value; the lower the value, the more preferred the route.
According to Juniper Networks technical documentation, anaggregate routeis assigned a default preference of
130. Aggregate routes are a form of static-like route used to group specific routes into a single, broader prefix to reduce the size of routing tables and limit the scope of routing updates. They are "protocol-independent" because they are not learned from a dynamic neighbor but are manually defined by the administrator.
To understand where130fits in the hierarchy, it is helpful to compare it with other common Junos preferences:
* Directly connected interfaces:0
* Static routes:5
* OSPF Internal:10
* IS-IS Level 1/2:15/18
* Aggregate routes: 130
* OSPF AS External:150
* BGP (Internal and External):170
* Generated routes:150
By setting the aggregate route preference to 130, Junos ensures that specific routes learned via IGPs (like OSPF or IS-IS) are preferred over the aggregate. This is essential because an aggregate route is often used as a
"catch-all" or a discard route when more specific path information is missing. If the aggregate had a lower preference (like 5), it might override dynamic routing information, leading to suboptimal routing or black- holed traffic.
NEW QUESTION # 154
Which two steps are required to enable MPLS on a physical interface in Junos? (Choose two.)
Answer: A,B
Explanation:
To enable MPLS on a physical interface in Junos, the family mpls statement must be added to the interface configuration. Additionally, the interface itself must be specified under the protocols mpls section of the configuration.
NEW QUESTION # 155 
In the exhibit, Site A is sending traffic to Site B. R1 adds MPLS label 7166 to direct the traffic to R5. Which two criteria did R1 use to determine which label number to add to the traffic? (Choose two.)
Answer: B,C
Explanation:
In a Juniper Networks MPLS environment, the process by which a router determines how to forward traffic involves both the control plane and the data plane. When R1 (acting as an Ingress Label Edge Router, or LER) receives an IP packet from Site A destined for Site B, it must perform a lookup to decide whether to forward the packet via standard IP routing or via an MPLS Label Switched Path (LSP).
The first criterion R1 uses is thedestination address of the traffic(Option C). Upon receiving the native IP packet, R1 looks up the destination IP in its routing table (typically inet.0). If the destination matches a prefix that is associated with an LSP-such as the loopback address of R5 or a prefix reachable via R5-the router identifies the appropriate Forwarding Equivalence Class (FEC). The FEC essentially groups packets that should be forwarded in the same manner over the same path. Without identifying the destination, the router cannot map the traffic to the correct MPLS tunnel.
The second criterion is thelabel number advertisement received from R2(Option D). MPLS relies on downstream label allocation. In this topology, R2 is the immediate downstream "next hop" for R1 on the path to Site B. For the LSP to be established, R2 must signal a label to R1 using a protocol like LDP (Label Distribution Protocol) or RSVP (Resource Reservation Protocol). This label (in this case, 7166) tells R1: "If you want to send traffic to the destination associated with this LSP, wrap it in this specific label so I know how to process it." R1 does not use the source address (Option A) for standard label mapping, nor does it receive the label directly from R5 (Option B) in a hop-by-hop signaling model; it must use the label provided by its direct neighbor, R2. Therefore, by combining the destination IP (to find the path) and the label provided by the next hop (to encapsulate the packet), R1 successfully directs the traffic through the MPLS core.
NEW QUESTION # 156
Which two statements regarding GRE and IP-IP tunnels are correct? (Choose two.)
Answer: B,D
Explanation:
GRE and IP-IP tunnels encapsulate the original packet inside a new IP header, which increases the packet size and therefore adds additional overhead to the transmitted packets.
These tunneling mechanisms do not provide encryption. They only encapsulate packets for transport across another network, so separate technologies such as IPsec are required if encryption is needed.
NEW QUESTION # 157
......
Are you interested in Prep4pass JN0-364 pdf torrent? You know, most of IT candidates choose Juniper JN0-364 for preparation for their exam test. Yes, we provide you with the comprehensive and most valid JN0-364 study material. We say valid because we check the update every day, so as to ensure the JN0-364 Exam Dump offered to you is the latest and best. With JN0-364 updated training pdf, you can pass your JN0-364 actual exam at first attempt.
JN0-364 Valid Vce Dumps: https://www.prep4pass.com/JN0-364_exam-braindumps.html
What's more, part of that Prep4pass JN0-364 dumps now are free: https://drive.google.com/open?id=1UK9x7geiixh-hrkhjRuRInb75E11cUz3