P.S. Free 2026 Fortinet NSE6_SDW_AD-7.6 dumps are available on Google Drive shared by PassExamDumps: https://drive.google.com/open?id=1EuSczWl_mqE0--acoBTYI5W8XGL5kdpx
Free demo are available for NSE6_SDW_AD-7.6 study materials for you to have a try before purchasing, which will help you have a deeper understanding of what you are going to buy. You can find the free demo for NSE6_SDW_AD-7.6 exam braindumps in our website. If you are quite satisfied with the free demo, and want the complete version, just add it to the cart and pay for it. You will get the downloading link and password for the NSE6_SDW_AD-7.6 Study Materials within ten minutes, if you donโt receive, you can ask for help from our service stuff.
| Certification Vendor: | Fortinet |
|---|---|
| Exam Name: | Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator |
| Exam Number: | NSE6_SDW_AD-7.6 |
| Certificate Validity Period: | 2 years |
| Exam Format: | Multiple Choice, Multiple Response, Scenario-based questions |
| Exam Price: | $200 USD (excluding taxes) |
| Real Exam Qty: | 35โ40 |
| Passing Score: | Pass/Fail (cut score determined by Fortinet) |
| Available Languages: | English |
| Related Certifications: | FCSS in SASE Fortinet Certified Professional - Secure Networking NSE 6 - SD-WAN |
| Exam Duration: | 75 minutes |
| Recommended Training: | Fortinet Training - SD-WAN Enterprise Administrator |
| Exam Registration: | Pearson VUE Registration |
| Sample Questions: | Fortinet NSE6_SDW_AD-7.6 Sample Questions |
| Exam Way: | Online proctored or onsite testing via Pearson VUE |
| Pre Condition: | No mandatory prerequisites; recommended: 3+ years networking experience, 2+ years FortiGate/FortiManager experience |
| Official Syllabus URL: | https://training.fortinet.com/local/staticpage/view.php?page=sd-wan_enterprise_administrator_exam |
>> Reliable NSE6_SDW_AD-7.6 Braindumps Questions <<
Before the clients buy our NSE6_SDW_AD-7.6 guide prep they can have a free download and tryout. The client can visit the website pages of our product and understand our NSE6_SDW_AD-7.6 study materials in detail. You can see the demo, the form of the software and part of our titles. To better understand our NSE6_SDW_AD-7.6 Preparation questions, you can also look at the details and the guarantee. So it is convenient for you to have a good understanding of our NSE6_SDW_AD-7.6 exam questions before you decide to buy our NSE6_SDW_AD-7.6 training materials.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 15
(You want FortiGate to use SD-WAN rules to steer ping local-out traffic.
Which two constraints should you consider? Choose two answers.)
Answer: B,D
Explanation:
In FortiOS 7.6, local-out traffic is traffic generated by the FortiGate itself, such as ping, traceroute, FortiGuard updates, DNS, NTP, and SNMP. Local-out traffic does not traverse the firewall policy engine and therefore behaves differently from forwarded traffic in SD-WAN.
According to the FCSS SD-WAN 7.6 curriculum and Fortinet SD-WAN architecture documentation, local- out traffic does not use SD-WAN by default. Instead, it follows the routing table (static and dynamic routes). To allow local-out traffic to be evaluated by SD-WAN rules, the administrator must explicitly enable local-out SD-WAN processing.
The curriculum also states that only SD-WAN rules using the manual strategy are supported for local-out traffic. SLA-based, application-based, and dynamic strategies are not evaluated for traffic generated by the FortiGate itself. This is a fundamental architectural limitation of SD-WAN in FortiOS 7.6.
Option B is incorrect because FortiGate does not automatically apply SD-WAN rules to ping or traceroute traffic by default. Even these tools follow the routing table unless local-out SD-WAN is enabled.
Option D is incorrect because local-out SD-WAN configuration is global. Individual local-out features do not require separate SD-WAN enablement.
NEW QUESTION # 16
Refer to the exhibit.
Which SD-WAN rule and interface uses FortiGate to steer the traffic from the LAN subnet 10.0.1.0/24 to the corporate server 10.2.5.254?
Answer: C
Explanation:
Traffic steering in Fortinet SD-WAN is based on defined rules and the corresponding outgoing interfaces. The exhibit (not shown here) would indicate that the traffic from the LAN subnet 10.0.1.0/24 to the server
10.2.5.254 is matched by SD-WAN rule 3 and sent out via the HUB1-VPN3 interface.
References:
[FCSS_SDW_AR-7.4 1-0.docx Q2]
FortiOS 7.4 SD-WAN Concept Guide - Rule Matching
NEW QUESTION # 17
Refer to the exhibit. The administrator used the SD-WAN overlay template to prepare an IPsec tunnels configuration for a hub-and-spoke SD-WAN topology. The exhibit shows the FortiManager installation preview for one FortiGate device.
Based on the exhibit, which statement best describes the configuration applied to the FortiGate device?
Answer: C
Explanation:
The phase1-interface shows set type dynamic, set peertype any, and set mode-cfg enablewith an address pool (ipv4-start-ip, ipv4-end-ip, ipv4-netmask). Those are dial-up server settings-i.e., a hub handing out virtual IPs to spokes. It also has set auto- discovery-sender enable, allowing the hub to participate in ADVPN shortcut negotiation (sending offers).
NEW QUESTION # 18
The FortiGate devices are managed by ForliManager, and are configured for direct internet access (DIA). You confirm that DIA is working as expected for each branch, and check the SD-WAN zone configuration and firewall policies shown in the exhibits.
Then, you use the SD-WAN overlay template to configure the IPsec overlay tunnels. You create the associated SD-WAN rules to connect existing branches to the company hub device and apply the changes on the branches.
After those changes, users complain that they lost internet access. DIA is no longer working.
Based on the exhibit, which statement best describes the possible root cause of this issue?
Answer: C
Explanation:
The SD-WAN overlay template defines a zone for each underlay interface and moves the interfaces into those zones. This statement perfectly describes the likely sequence of events. The template, when applied, re- organizes the interfaces and zones, causing the existing firewall policy that relies on the old zone configuration to fail. This is the most plausible root cause.
NEW QUESTION # 19
An MSSP uses FortiManager to manage the FortiGate devices of its customers. The administrator grouped the devices for each customer in different ADOMs. For customer A, you configured one SD-WAN overlay template that applies to all devices in the ADOM. For customer B, you configured SD-WAN for DIA at the device level, with a different configuration for each FortiGate. You onboard customer C, a car manufacturer, who requests to have a single-hub SD- WAN topology for its retail points, and a dual-hub topology for the FortiGate devices installed in its factories. Which statement best describes how you should handle this request?
Answer: C
Explanation:
FortiManager uses SD-WAN overlay templates per ADOM to define the SD-WAN topology.
Within a single ADOM, you can only define one SD-WAN overlay template topology that applies to all devices in that ADOM.
If different topologies are needed (e.g., single-hub for retail, dual-hub for factories), the devices cannot share multiple overlay topologies within the same ADOM.
Therefore, to handle multiple topologies, devices must be separated into different ADOMs or use separate device-level configurations outside the overlay template.
NEW QUESTION # 20
......
NSE6_SDW_AD-7.6 Reliable Exam Topics: https://www.passexamdumps.com/NSE6_SDW_AD-7.6-valid-exam-dumps.html
BONUS!!! Download part of PassExamDumps NSE6_SDW_AD-7.6 dumps for free: https://drive.google.com/open?id=1EuSczWl_mqE0--acoBTYI5W8XGL5kdpx