300-110 Reliable Test Sample - Exam 300-110 Duration

The 300-110 learning materials from our company are very convenient for all people, including the convenient buying process, the download way and the study process and so on. Upon completion of your payment on our 300-110 exam questions, you will receive the email from us in several minutes, and then you will have the right to use the 300-110 Test Guide from our company. In addition, there are three different versions for all people to choose: PDF, Soft and APP versions. According to your actual situation, you can choose the suitable version from our 300-110 study question.

Cisco 300-110 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Wireless Site Survey	25%	- Layer 1 site survey execution and analysis - Pre-deployment survey and validation - RF propagation and attenuation analysis - Design requirements collection and constraint evaluation 1. Real-time application requirements 2. Security requirements definition 3. Deployment type considerations 4. AP and antenna type selection 5. Client density and capacity planning
Topic 2: WLAN High Availability and Security Design	20%	- Security architecture design 1. Encryption and privacy mechanisms 2. Authentication and authorization frameworks 3. Wireless intrusion prevention design - High availability design 1. AP redundancy and resiliency 2. Controller failover and stateful switchover 3. N+1 and N+N redundancy models - Management and monitoring design
Topic 3: Mobility Design	25%	- Guest mobility and BYOD design - Mobility architecture models 1. Layer 2 and Layer 3 roaming 2. Anchor and foreign controller design 3. Mobility groups and domains - Roaming optimization 1. Fast Secure Roaming 2. 802.11r/k/v standards implementation
Topic 4: Wireless Infrastructure Design	30%	- Wired-wireless integration design 1. VLAN and QoS design 2. Switching infrastructure requirements 3. PoE and power planning - Wireless Controller architecture and deployment 1. Redundancy and high availability design 2. Controller models and scalability 3. AP modes and deployment options - High-density wireless design 1. Channel planning and power management 2. Capacity optimization techniques 3. Co-channel interference mitigation

>> 300-110 Reliable Test Sample <<

Exam 300-110 Duration - Best 300-110 Preparation Materials

Free update for 300-110 Study Guide materials are available, that is to say, in the following year, you can get the latest information about the 300-110 exam dumps without spending extra money. In addition, 300-110 study guide of us is compiled by experienced experts, and they are quite familiar with the dynamics of the exam center, so that if you choose us, we can help you to pass the exam just one time, in this way, you can save your time and won’t waste your money. We also have online and offline chat service stuff, if any other questions, just contact us.

Cisco Designing Cisco Wireless Networks Sample Questions (Q34-Q39):

NEW QUESTION # 34
An engineer is designing an outdoor mesh network for a container yard. Which two design rules apply to the mesh deployment? (Choose two.)

A. Each RAP supports an unlimited number of MAPs with no throughput impact.
B. All MAPs must have a wired uplink to the distribution switch.
C. Each MAP should be no more than four hops from its RAP.
D. The RAP and MAP must be configured in different bridge groups.
E. Backhaul throughput is approximately halved with each additional hop.

Answer: C,E

Explanation:
In a Cisco mesh deployment, the Root AP (RAP) has a wired connection to the network and the Mesh APs (MAPs) connect back to it over a wireless backhaul, typically using the 5 GHz radio.
Cisco recommends limiting the mesh to no more than four hops from RAP to the furthest MAP (Option A); while more hops are technically possible, each additional hop increases latency, jitter, and convergence time after a link failure. Backhaul throughput is roughly halved with each hop (Option C) because a MAP that relays traffic must both receive and retransmit each frame on the same half-duplex radio channel, consuming airtime twice. This compounds down the chain, so an eight-hop design delivers negligible usable throughput at the far end. MAPs by definition have no wired uplink, and RAPs and their associated MAPs must share the same bridge group name to form the mesh tree.

NEW QUESTION # 35
A customer has a Cisco wireless network with two Cisco Catalyst 9800 Series WLCs in a high availability cluster, 50 Cisco 2800I APs, and all SSIDs and services are 5 GHz only. A security mandate requires that rogue APs be scanned and identified in 2.4 GHz and 5 GHz bands without impacting existing client connectivity. How must the wireless network be reconfigured to meet the requirement without purchasing additional APs?

A. Set the XOR radio role to Client Serving and the slot 1 radio to Sniffer mode on all the APs.
B. Set the XOR radio role to Sniffer mode and the slot 1 radio to Client Serving on all the APs.
C. Set the XOR radio role to Client Serving and the slot 1 radio to Monitor mode on all the APs.
D. Set the XOR radio role to Monitor mode and the slot 1 radio to Client Serving on all the APs.

Answer: D

Explanation:
The Cisco Aironet 2800 Series APs feature a dual-radio architecture with a dedicated 5 GHz radio (slot 1) and a Flexible Radio Assignment (XOR) radio (slot 0) that can operate in either 2.4 GHz or 5 GHz, or be assigned to monitor mode for scanning functions. Since all existing SSIDs and services are 5 GHz only, the slot 1 (dedicated 5 GHz) radio is responsible for all current client connectivity - it must remain in Client Serving mode to maintain uninterrupted 5 GHz WLAN service. The XOR radio (slot 0), currently either idle or operating as a secondary 5 GHz radio, can be repurposed without impacting client service. Setting the XOR radio to Monitor mode enables it to continuously scan all channels across both the 2.4 GHz and 5 GHz spectrum for rogue AP detection, using the embedded CleanAir and WIDS capabilities. In Monitor mode, the XOR radio operates full-time as a dedicated scanner, providing rogue detection coverage on 2.4 GHz (previously uncovered since all services were 5 GHz) and supplementary scanning on 5 GHz. This eliminates the need for additional dedicated monitor mode APs. Options A, C, and D either place the slot 1 radio in a non-client-serving role (disrupting existing connectivity) or use the inappropriate Sniffer mode instead of Monitor mode for rogue detection. Reference: WLSD Study Guide - Cisco 2800 XOR Radio Architecture, Monitor Mode for Rogue Detection, Flexible Radio Assignment, WIDS Design.

NEW QUESTION # 36
A community bank has three campus locations and one HQ with the data center. Each campus has four Cisco Catalyst 9120 APs. Poor WAN uplinks cause impacted connectivity back to HQ, and each campus is planned to have its own EWC controller based on C9120 AP to keep traffic local. Guest WLAN will be routed locally.
Employee WLAN must be authenticated 802.1x PEAP via HQ ISE but can pass traffic locally once authenticated. HQ WLC will be the primary backup WLC for each WLC. Which design approach should the consulting engineer take?

A. Two C9120 campus APs must be converted to EWC mode, one for the active controller and the other for standby set as N+1 backup. The campus guest WLAN will use local web auth on guest VLAN, and employee WLAN will need the HQ AAA server added to EWC.
B. One C9120 campus AP must be converted to EWC mode, and the preferred controller is set to that AP with HQ WLC paired as mobility peer and configured as N+1 backup. The campus guest WLAN will use local web auth on guest VLAN. The campus employee WLAN will need the guest anchor back to the HQ employee WLAN.
C. One C9120 AP in each campus must be converted to EWC mode, and the preferred controller is set to that AP with HQ WLC set as N+1 backup. The campus guest WLAN will use local web auth on guest VLAN, and employee WLAN will need the HQ AAA server to be added to EWC.
D. Two C9120 campus APs must be converted to EWC mode, one for the active controller and the other for standby with HQ WLC as N+1 backup. The campus guest WLAN will use the guest anchor to HQ WLC for guest VLAN access, and employee WLAN will need the HQ AAA server added to EWC.

Answer: C

Explanation:
This community bank design scenario requires precise alignment of EWC deployment scale, AAA integration, and traffic routing decisions with the stated constraints. With four APs per campus and a goal of local traffic handling, converting a single C9120 to EWC mode is optimal - converting two APs to EWC (Options B and C) on a four-AP campus wastes 50% of campus AP infrastructure for controller functions rather than client service. The single EWC AP serves as the active local controller for the remaining three client-serving APs. The HQ WLC set as N+1 backup ensures that if the branch EWC fails, the remaining APs fall back to the centralized controller. For the guest WLAN, local web authentication on the guest VLAN provides the locally routed guest access requirement without requiring WAN connectivity to HQ. For the employee WLAN, adding the HQ ISE AAA server to the EWC ' s RADIUS configuration enables 802.1x PEAP authentication to traverse the WAN to ISE at the time of client association. Once authenticated, traffic is locally switched - satisfying both the central authentication and local traffic routing requirements simultaneously. Option D ' s use of guest anchor for the employee WLAN is architecturally incorrect and would route traffic through HQ rather than locally. Reference: WLSD Study Guide - EWC Design, N+1 Redundancy, AAA Integration for Branch WLANs, Local Web Authentication.

NEW QUESTION # 37
During a post-deployment site survey, issues are found with non-Wi-Fi interference. What should the engineer use to identify the source of the interference?

A. Wireless intrusion prevention
B. Cisco spectrum expert
C. Network analysis module
D. Wireshark

Answer: B

Explanation:
Cisco Spectrum Expert is a dedicated spectrum analysis tool designed to identify and analyze non-Wi-Fi interference sources at Layer 1. During a post-deployment site survey, it can detect interference from various devices such as cordless phones, Bluetooth devices, microwave ovens, video cameras, and other unlicensed RF emitters. The tool provides a visual representation of the RF environment across the frequency spectrum, allowing engineers to pinpoint the exact source of interference and characterize it by duty cycle, frequency, and interference pattern. A network analysis module (Option A) operates at Layer 2 and above, unable to detect non-802.11 RF emissions. Wireless intrusion prevention (Option B) detects rogue APs and 802.11 attacks but not Layer 1 RF noise. Wireshark (Option C) is a packet capture tool for Layer 2-7 analysis and cannot detect non-Wi-Fi RF energy. Reference: WLSD Study Guide - Layer 1 Spectrum Analysis, Post- Deployment Survey, Non-Wi-Fi Interference Identification.

NEW QUESTION # 38
An engineer is performing a passive survey report. The coverage heat map shows the entire site with all signal levels. To see only the desired coverage, which action must the engineer take?

A. Change the color scheme to show the desired heat map.
B. Use the RSSI slider to set the heat map to the desired cutoff filter.
C. Use the RSSI calibration tool to configure the receiver sensitivity.
D. Filter the results to show the desired APs only.

Answer: B

Explanation:
To focus the coverage heat map on the desired coverage threshold, the engineer should use the RSSI slider to set the heat map to the desired cutoff filter. This action adjusts the display to show only the signal levels that meet or exceed the specified RSSI value, effectively filtering out weaker signals and highlighting areas with sufficient coverage. In Ekahau and similar survey tools, the RSSI slider provides a dynamic way to set minimum signal thresholds, allowing the engineer to quickly validate whether coverage meets design targets such as -67 dBm for voice or -70 dBm for data.

NEW QUESTION # 39
......

Considering all customers'sincere requirements, 300-110 test question promise to our candidates with plenty of high-quality products, considerate after-sale services. Numerous advantages of 300-110training materials are well-recognized, such as 99% pass rate in the exam, free trial before purchasing, secure privacy protection and so forth. From the customers'perspective, We treasure every customer'reliance and feedback to the optimal 300-110 Practice Test and be the best choice.

Exam 300-110 Duration: https://www.itcertmaster.com/300-110.html