Exam Questions for Cisco 300-510 - Money-Back Guarantee

P.S. Free & New 300-510 dumps are available on Google Drive shared by TestKingIT: https://drive.google.com/open?id=1PEi40FT06c9xXumkndYdNQkbagCrvQPj

A lot of students have used our product and prepared successfully for the test. Every user has rated study material positively and passed the 300-510 Exam. TestKingIT gives a guarantee to the customers that if they fail to pass the Implementing Cisco Service Provider Advanced Routing Solutions (300-510) certification on the very first try despite all their efforts they can claim their money back according to terms and conditions. A team of experts is working day and night in order to make the product successful day by day and provide the customers with the best experience.

Cisco 300-510 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Unicast Routing	35%	- Describe IPv6 tunneling mechanisms 1. IPv6 provider edge (6PE) 2. Static IPv6-in-IPv4 tunnels 3. Dynamic 6to4 tunnels - Implement fast convergence 1. Nonstop Forwarding 2. Bidirectional forwarding detection 3. LFA 4. Timers 5. NSR 6. BGP additional and backup path 7. BGP PIC (edge and core) - Troubleshoot OSPF multiarea operations (IPv4 and IPv6) 1. Summarization 2. Route advertisement - Troubleshoot BGP 1. Multihoming 2. Communities 3. TTL security and inter-domain security 4. Route dampening 5. Confederations 6. Maximum prefix 7. Route reflectors 8. Dynamic neighbors 9. Route advertisement - Describe BGP scalability and performance 1. Route reflectors 2. BGP confederations - Troubleshoot IS-IS multilevel operations (IPv4 and IPv6) 1. Summarization 2. Route advertisement - Compare OSPF and IS-IS routing protocols
Topic 2: MPLS and Segment Routing	25%	- Implement segment routing 1. SRGB and SRLB 2. Routing protocol extensions (OSPF, IS-IS, BGP) 3. Topology-Independent Loop-Free Alternate (TI-LFA) 4. Migration procedures (SR prefer and mapping server) - Describe segment routing v6 (SRv6) 1. Data plane operations 2. Control plane operations - Describe segment routing traffic engineering 1. PCE-based path calculation 2. Policies (constraints, metrics, and attributes) 3. Automated steering and coloring - Troubleshoot MPLS 1. BGP free core 2. LSP 3. Unified BGP 4. LDP 5. RSVP TE tunnels
Topic 3: Routing Policy and Manipulation	25%	- Troubleshoot route manipulation for IGPs 1. OSPF 2. IS-IS - Compare routing policy language and route maps - Troubleshoot route manipulation for BGP 1. Route filtering 2. Traffic steering - Describe conditional matching 1. Route types 2. Semantics of policy applications and statements 3. BGP attributes and communities 4. Prefix lists and prefix sets 5. Hierarchical and parameterized structures 6. Policy sets 7. Regular expressions 8. Tags 9. ACLs 10. Operations
Topic 4: Multicast Routing	15%	- Implement PIM-SM operations 1. BIDIR-PIM operations 2. Auto-RP, PIMv2 BSR, anycast RP 3. SSM operations 4. MSDP operations - Troubleshoot multicast routing 1. Single domain 2. Multidomain - Compare multicast concepts 1. Any-Source Multicast (ASM) versus Source Specific Multicast (SSM) 2. Multicast domains, distribution trees, and IGMP operations 3. Intra-domain versus inter-domain multicast routing - Describe multicast concepts 1. Principles and operations of PIM-SM 2. Mapping of multicast IP addresses to MAC addresses 3. MLDP/P2MP 4. Multiprotocol BGP for IPv4 and IPv6 5. Multicast Source Discovery Protocol (MSDP) operations

>> Real 300-510 Questions <<

300-510 Actual Cert Test & 300-510 Certking Torrent & 300-510 Free Pdf

The desktop practice test design is best for self-appraisal and decreases the possibilities of disappointment in the Implementing Cisco Service Provider Advanced Routing Solutions (300-510) Exam. It is upheld by each window PC which assists clients with clearing the Cisco 300-510 certification exam with passing marks.The web-based format can be gotten online without introducing the product for the Cisco 300-510 Exam. The web-based practice test is upheld by every one of the working frameworks and programs which will be useful for Implementing Cisco Service Provider Advanced Routing Solutions (300-510) exam preparation.

Cisco Implementing Cisco Service Provider Advanced Routing Solutions Sample Questions (Q39-Q44):

NEW QUESTION # 39
Refer to the exhibit.

What is the relationship between Router 1 and Router 2?

A. Router 1 centrally learns the topology of the network to aid in SR-TE path selection, and Router 2 is a node that feeds Router 1 topology information.
B. Router 1 and Router 2 centrally learn the topology of the network to aid in SR-TE path selection for peers.
C. Router 1 and Router 2 are participating in SR-TE tunnels and are both head-end routers.
D. Router 2 is the head-end router in an SR-TE tunnel, and it is learning topology of the network from the PCE enabled on Router 1.

Answer: D

NEW QUESTION # 40
Refer to the exhibit. A network engineer must enable segment routing between the three autonomous systems with these requirements:
- OSPF link-state data for area 0 routers must be distributed to the
controller via BGP LS.
- EPE must be enabled on the egress node in AS 100.
- Routers must advertise peer node SIDs to the controller R1 via BGP
LS.
Which configuration must the engineer apply?

A. R2(config)# router ospf 100
R2(config-ospf)# redistribute bgp 100
R2(config)# router bgp 100
R2(config-bgp}# neighbor 192.168.20.1
R2(config-bgp-nbr)# remote-as 100
R2(config-bgp-nbr}# egress-engineering
R2(config-bgp}# neighbor 10.10.10.1
R2(config-bgp-nbr}# remote-as 200
R2(config-bgp-nbr}# address-family link-state link-state
B. R1(config)# router ospf 100
R1(config-ospf)# redistribute bgp 100
R1(config)# router bgp 100
R1(config-bgp}# neighbor 192.168.30.1
R1(config-bgp-nbr)# remote-as 100
R1(config-bgp-nbr}# egress-engineering
R1(config-bgp}# neighbor 10.10.10.1
R1(config-bgp-nbr}# remote-as 200
R1(config-bgp-nbr}# address-family link-state link-state
C. R1(config)# router ospf 100
R1(config-ospf}# distribute link-state instance-id 100 throttle 10
R1(config)# router bgp 100
R1(config-bgp}# neighbor 10.10.10.1
R1(config-bgp-nbr)# remote-as 200
R1(config-bgp-nbr}# egress-engineering
R1(config-bgp}# neighbor 192.168.30.1
R1(config-bgp-nbr}# remote-as 100
R1(config-bgp-nbr}# address-family link-state link-state
D. R2(config)# router ospf 100
R2(config-ospf}# distribute link-state instance-id 100 throttle 10
R2(config)# router bgp 100
R2(config-bgp}# neighbor 10.10.20.1
R2(config-bgp-nbr)# remote-as 300
R2(config-bgp-nbr}# egress-engineering
R2(config-bgp}# neighbor 192.168.20.1
R2(config-bgp-nbr}# remote-as 100
R2(config-bgp-nbr}# address-family link-state link-state

Answer: D

NEW QUESTION # 41

Refer to the exhibit. Network connectivity between bank A and bank B has been lost Users at bank A and bank B are able to successfully reach their directly connected PE routers. All routers in OSPF area 0 are correctly advertising and learning routing updates. Which action resolves the issue?

A. Configure router PI to advertise the IP prefix of PEI.
B. Enable next-hop-self under the iBGP peering configuration on routers PEI and PE2
C. Configure the P routers to redtstnbute BGP routes within OSPF area 0.
D. Configure MPLS with an end-to-end label-switched path on each router.

Answer: D

NEW QUESTION # 42
Which three methods can be used to reduce the full-mesh IBGP requirement in a service provider core network? (Choose three.)

A. Implement route reflectors
B. Implement confederations
C. Implement MPLS (LDP) in the core network on all the PE and P routers
D. Disable the IBGP split-horizon rule
E. Enable multi-protocol BGP sessions between all the PE routers
F. Enable BGP synchronization

Answer: A,B,C

NEW QUESTION # 43
Refer to me exhibit. Refer to the exhibit. A network engineer sets up a multihoming eBGP topology where multiple Autonomous Systems connect to ASN 64501. The engineer wants to block all the routes coming from ASN 64502 but allow all the others. For that purpose, the following AS Path prefix list is being used:
(config)#ip as-path access-list 10 deny _64502$
What must be fixed to achieve this result?

A. The statement must be modified with ip as-path access-list 1 deny _64502_
B. The AS-PATH filter must be defined inside the route-map mode
C. At the end ip as-path access-list 10 permit .* must be included
D. The statement must CM modified with ip as path access list 1 deny A64502$

Answer: C

NEW QUESTION # 44
......

If you study with our 300-510 exam questions, then you are better than others, and of course you will get more opportunities. You will never be picked by others. You will become the target of business competition! This will be a happy event! You must understand what it means in this social opportunity. You can get your favorite project and get a higher salary! Our 300-510 simulating exam can give you more than just the success of an exam, but also the various benefits that come along with successful 300-510 exams.

Dump 300-510 Check: https://www.testkingit.com/Cisco/latest-300-510-exam-dumps.html

BONUS!!! Download part of TestKingIT 300-510 dumps for free: https://drive.google.com/open?id=1PEi40FT06c9xXumkndYdNQkbagCrvQPj