Learning Cisco 300-515 Mode | Lab 300-515 Questions

2026 Latest ValidExam 300-515 PDF Dumps and 300-515 Exam Engine Free Share: https://drive.google.com/open?id=1APRRn72gxY3Lr38QPEism7Wf8VuxOuKx

In order to serve you better, we have a complete system for 300-515 exam materials. We offer you free demo to have a try before buying, so that you can have a better understanding of what you are going to buy. If you want the 300-515 exam dumps after trying, just add to cart and pay for it. You will receive the downloading link and password within ten minutes and you can start your learning right now. If you don’t receive, contact us, and we will check it for you. After you purchasing 300-515 Exam Materials, we also have after-sales, and if you have any questions, you can consult us.

Cisco 300-515 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Layer 3 VPNs	35%	- L3VPN troubleshooting - MP-BGP for VPNv4 routes - Route target and route distinguishers - MPLS L3VPN architecture - Inter-AS L3VPN options - VRF and VRF-lite - PE-CE routing protocols
Topic 2: IPv6 VPNs	15%	- 6VPE and 6PE - MP-BGP for VPNv6 routes - IPv6 PE-CE routing - IPv6 VPN migration and troubleshooting - Dual-stack VPN operation
Topic 3: VPN Architecture	25%	- MPLS and VPN fundamentals - VPN deployment models - Inter-AS and Intra-AS VPN - VPN service requirements and design considerations
Topic 4: Layer 2 VPNs	25%	- L2TPv3 - MPLS-based L2VPN services - Ethernet VPN (EVPN) - VPWS and VPLS - L2VPN configuration and verification - EVPN control plane and data plane

>> Learning Cisco 300-515 Mode <<

100% Pass 2026 Unparalleled Cisco Learning 300-515 Mode

Did you often feel helpless and confused during the preparation of the 300-515 exam? Do you want to find an expert to help but feel bad about the expensive tutoring costs? Don't worry. Our 300-515 exam questions can help you to solve all the problems. Our 300-515 Study Material always regards helping students to pass the exam as it is own mission. And we have successfully helped numerous of the candidates pass their exams.

Cisco Implementing Cisco Service Provider VPN Services Sample Questions (Q111-Q116):

NEW QUESTION # 111
Which two frames can be configured on an Ethernet flow point? (Choose two.)

A. of a specific VLAN
B. with no tags
C. with different class of service values
D. with different type of service values
E. with identical type of service value

Answer: A,B

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cether/configuration/xe-3s/asr903/16-5-1/b-ce- xe-16-5-asr900/trunk-efp-support.html

NEW QUESTION # 112
SIMULATION 6

Guidelines
This is a lab item in which tasks will be performed on virtual devices.
Refer to the Tasks tab to view the tasks for this lab item

Refer to the Topology tab to access the device console(s) and perform the tasks.

Console access is available for all required devices by clicking the device icon or using the

tab(s) above the console window.
All necessary pre-configurations have been applied.

Do not remove any existing configurations from the devices, only those necessary to make the

appropriate changes required to fulfill the listed tasks.
Do not change the enable password or hostname for any device.

Save your configurations to NVRAM before moving to the next item.

Click Next at the bottom of the screen to submit this lab and move to the next question.

When Next is clicked, the lab closes and cannot be reopened.

Topology

Tasks
CE1 and CE2 are IPv6 Customer Premise Equipment of two customers that communicate with each other through the MPLS L3VPN core comprising Provide Edge PE1, PE2, and route- reflector RR.
Perform the below configuration and verification tasks as noted.
1. Troubleshoot and modify the CEs to establish IPv6 BGP sessions with the PEs.
2. Troubleshoot and modify the PEs to receive the remote CE's advertised route in their BGP VRF table.
Initial configuration with IPv6 addressing has been completed. Do not change the configurations except to fulfill the abovementioned tasks.
Apply the solution with the minimum configuration.

Answer:

Explanation:
See explanation below.
Explanation:
CE1

CE2

PE1

PE2

Route-Reflector (RR)

CE routers: Enabling the IPv6 address-family, activating the PE neighbor, and advertising the internal /128 loopbacks brings the eBGP IPv6 sessions up.
PE routers:
Under address-family ipv6 vrf CUST the CE neighbors are activated so the PE learns the

customer routes.
Matching route-target import/export ensures those VPNv6 routes are exported to RR and

imported by the remote PE.
Activating the RR neighbor under address-family vpnv6 allows VPNv6 prefixes to flow between

PEs through the route-reflector.
RR: Activating each PE as a VPNv6 peer reflects the VPNv6 routes between them, so each PE receives the remote CE's IPv6 prefixes in its VRF BGP table.

NEW QUESTION # 113
Which statement describes the no bgp default route-target filter command?

A. Prefixes that are received with route targets and distinguisher are accepted.
B. Prefixes that are received with route targets that are not imported at the PE are accepted.
C. Prefixes that are received with route targets and distinguisher are not accepted.
D. Prefixes that are received with route targets that are not imported at the PE are not accepted.

Answer: B

NEW QUESTION # 114
Refer to the exhibit. What is the effect of this configuration?

A. A Cisco MPLS TE tunnel is generated with 192.168.1.2 as the source IP address of router 1.
B. The mroute table is cleared.
C. Router 1 accepts multicast routes with a tag of 12:1
D. An LSP virtual interface tunnel is created.

Answer: C

NEW QUESTION # 115
Refer to the exhibit. PE1 is located at a company's headquarters, with PE2 and PE3 at remote offices. A service provider implemented E-Tree for the company, with PE1 serving at the root and PE2 and PE3 serving as leaf nodes in the topology. For redundancy, PE3 offers some of the same services that that offered at headquarters. However, when the link to PE1 fails, users on PE2 cannot access the services on PE3. Which action must the engineer take to resolve the issue?

A. Set the same MAC address for MLACP on each device.
B. Add a secondary IP address to the interface facing the EVPN.
C. Change the L2transport encapsulation type to MPLS.
D. Reconfigure PE3 as a root node.

Answer: D

Explanation:
In an EVPN E-Tree, leaf nodes cannot communicate with other leaves-only with roots. With PE1 (root) down, PE2 (leaf) cannot reach services on PE3 (also leaf). Making PE3 a root node permits leaf-to-root forwarding and restores access when the PE1 link fails.

NEW QUESTION # 116
......

All these three Implementing Cisco Service Provider VPN Services (300-515) exam questions formats offered by the ValidExam are easy to use and perfectly work with all the latest web browsers, operating systems, and devices. The ValidExam 300-515 web-based practice test software and desktop practice test software both are the mock Cisco 300-515 Exam that will give you real-time Implementing Cisco Service Provider VPN Services (300-515) exam environment for quick preparation.

Lab 300-515 Questions: https://www.validexam.com/300-515-latest-dumps.html

P.S. Free & New 300-515 dumps are available on Google Drive shared by ValidExam: https://drive.google.com/open?id=1APRRn72gxY3Lr38QPEism7Wf8VuxOuKx