Top H35-831 Reliable Test Notes | Reliable Huawei H35-831: HCIE-Datacom-Carrier (Written) V1.0 100% Pass

Education degree does not equal strength, and it does not mean ability. Education degree just mean that you have this learning experience only. And the real ability is exercised in practice, it is not necessarily linked with the academic qualifications. Do not feel that you have no ability, and don't doubt yourself. When you choose to participate in the Huawei H35-831 Exam, it is necessary to pass it. If you are concerned about the test, however, you can choose PrepAwayPDF's Huawei H35-831 exam training materials. No matter how low your qualifications, you can easily understand the content of the training materials. And you can pass the exam successfully.

Huawei H35-831 Exam Syllabus Topics:

SectionWeightObjectives
BGP Advanced Technologies20%- Carrier-Grade BGP
  • 1. BGP Confederations
  • 2. BGP Convergence Optimization
  • 3. Route Reflector Design
  • 4. Routing Policy Control
Network Automation and SDN5%- Automation Technologies
  • 1. Network Orchestration
  • 2. Intent-Based Networking
  • 3. NETCONF and YANG
Carrier IP Network Architecture10%- Carrier Network Evolution
  • 1. Carrier Network Architecture Design
  • 2. IP Network Development Trends
Network Service Technologies10%- Carrier Services
  • 1. VPN Interworking
  • 2. EVPN
  • 3. L3VPN
Network Operation and Maintenance5%- Monitoring and Troubleshooting
  • 1. Fault Diagnosis
  • 2. Performance Monitoring
  • 3. Service Assurance
Network Reliability and Protection7%- High Availability Design
  • 1. Fast Reroute
  • 2. BFD
  • 3. Protection Mechanisms
MPLS and Segment Routing20%- Carrier Transport Technologies
  • 1. MPLS Traffic Engineering
  • 2. MPLS Fundamentals
  • 3. SR Policy
  • 4. Segment Routing SR-MPLS
IGP Advanced Technologies15%- OSPF and IS-IS Advanced Features
  • 1. Multi-Topology Routing
  • 2. Route Convergence Optimization
  • 3. Traffic Engineering Extensions
IPv6 Technologies8%- IPv6 Deployment
  • 1. IPv6 Routing
  • 2. IPv4/IPv6 Transition Technologies

>> H35-831 Reliable Test Notes <<

H35-831 Valid Exam Tutorial, Test H35-831 Engine Version

We provide you with high-quality H35-831 learning materials for you, since the experienced experts compile and verify H35-831 learning materials, therefore the quality and the correctness can be guaranteed. By using H35-831 exam dumps of us, you will get a certificate successfully, hence you can enter a good enterprise and you salary will also be improved. At the same time, if you choose H35-831 Learning Materials of us, we have complete online and offline service stuff and after-service, and you can consult us anytime.

Huawei HCIE-Datacom-Carrier (Written) V1.0 Sample Questions (Q35-Q40):

NEW QUESTION # 35
A device receives two BGP routes for the same prefix from two peers, with one route received from each peer. One route has next hop NH1, whereas the other has next hop NH2. All other attributes of the two routes are identical. NH1 recursively resolves to two direct next hops, A and B, and NH2 likewise recursively resolves to two direct next hops, C and D. If BGP is configured with the maximum load-balancing 2 command and the device supports at most six load-balancing routes, how many load-balancing routes for the relevant prefix are present in the FIB?

Answer: A

Explanation:
Huawei Reference Verification:
Huawei's BGP multipath architecture distinguishes the number of BGP routes selected from the number of directly reachable FIB next hops produced by route recursion. The maximum load-balancing parameter controls the number of eligible equal-cost BGP paths. Each selected BGP next-hop address may recursively resolve through multiple equal-cost direct next hops. In this scenario two BGP paths are selected and each resolves through two direct forwarding alternatives. The total of four FIB next hops remains within the stated platform maximum of six. Therefore the correct answer is four.
Technical Deep Dive:
A is correct. `maximum load-balancing 2` permits two equivalent BGP paths for one destination, which here have BGP next hops NH1 and NH2. Route recursion then considers the IGP or directly connected paths that make each BGP next hop reachable. NH1 resolves to direct next hops A and B, while NH2 resolves to C and D: The installed FIB next-hop group therefore contains A, B, C and D, four choices in total. The device's six- path upper limit is a cap rather than a requirement to synthesize six routes. On Huawei carrier routers, the BGP control plane selects and resolves paths; forwarding NP/ASIC logic performs ECMP selection among the installed direct next hops. Useful diagnostic commands include `display bgp routing-table`, `display ip routing-table`, and `display fib`. The distinction between BGP multipath selection and physical recursive next- hop expansion is the key to the question.
#######################################################


NEW QUESTION # 36
Which statements about the backbone-network solution model for an IP transport network are correct?
Select all that apply.

Answer: A,D

Explanation:
Huawei Reference Verification:
Huawei's BGP Route Reflector implementation reduces the full-mesh IBGP requirement through RR-to-client sessions. Each client PE peers with its assigned RR or redundant RRs; the reflector forwards eligible BGP routes according to the IBGP route-reflection rules. In a conventional flat multi-cluster design, RRs representing different clusters maintain non-client IBGP relationships so that routes can be propagated between the clusters. Without RRs or an alternative scaling mechanism such as confederations, an IBGP full mesh is normally required. Clients are not required to peer directly with all other clients. These principles establish A and C in the intended deployment.
Technical Deep Dive:
A and C are correct for the conventional flat RR design. IBGP's split-horizon rule prevents routes learned from one IBGP neighbor from being sent to another ordinary IBGP neighbor. The number of full-mesh sessions across N speakers is N(N-1)/2. For 100 speakers that is 4,950 sessions, creating considerable operational overhead. An RR receives service routes from client PEs and reflects them to appropriate peers, reducing session count. PEs must have RR relationships in the architecture described by A, but not with every RR globally. In a flat multi-cluster design, inter-cluster RRs peer as non-clients, often in a full mesh. B incorrectly eliminates the normal full-mesh requirement without providing RRs or another solution, while D negates the major purpose of route reflection. Huawei uses Originator ID and Cluster List to prevent reflection loops. `display bgp peer` and `display bgp vpnv4 all peer` are useful for checking sessions.
Hierarchical RR topologies can use alternatives to a global inter-RR full mesh.
#######################################################


NEW QUESTION # 37
In the inter-AS VPN Option A network shown, CE1 and CE2 are in the same VPN. LDP and IGP are configured in both AS100 and AS200, and EBGP is configured between the ASBRs. CE1's loopback interface is assigned 10.1.1.1/32. If CE2 can ping CE1, which router assigns the inner label to CE2-to-CE1 packets forwarded by PE2?

Exhibit 45.1 - Original topology/configuration figure

Answer: E

Explanation:
Huawei Reference Verification:
In Huawei inter-AS MPLS VPN Option A, each ASBR runs customer VPN instances and exchanges VPN route information with its opposite ASBR over an ordinary inter-AS IP routing relationship. The ASBR-to- ASBR boundary resembles a CE-PE attachment rather than a single end-to-end MPLS VPN LSP. Within each AS, local MP-BGP advertisements include locally allocated VPN labels. For traffic traveling from CE2 in AS200 toward CE1 in AS100, ASBR2 advertises the CE1 destination route to PE2 using the VPN label allocated by ASBR2. Therefore ASBR2 supplies PE2's inner VPN label.
Technical Deep Dive:
B is correct. CE1 originates route 10.1.1.1/32, which PE1 learns and advertises through VPNv4 toward ASBR1 in AS100. In Option A, ASBR1 exchanges the corresponding ordinary IP route across the inter-AS VPN attachment to ASBR2. ASBR2 then advertises it to PE2 in AS200 as a labeled VPNv4 route and allocates its local VPN label. PE2 pushes this VPN label as the inner label and, where necessary, a public transport label outside it. P2 handles the transport forwarding, while ASBR2 interprets the local VPN context and forwards the packet across the AS boundary. The labels used in AS100 and AS200 need not be the same.
The defining principle of Option A is that VPN state and inter-AS connectivity terminate on both ASBRs, avoiding one continuous end-to-end VPN label stack.
#######################################################


NEW QUESTION # 38
In the distributed telco-cloud network shown, traffic is sent from the external network to the VNF. The route configurations on the relevant DC GW are shown. How is the traffic forwarded within the telco-cloud network, from the DC GW to the leaf node?

Exhibit 14.1 - Original topology/configuration figure

Answer: A

Explanation:
Huawei Reference Verification:
Huawei's underlay/overlay architecture distinguishes VXLAN tenant transport from the IP underlay that provides VTEP reachability. In this topology the DC GW's static VPN route resolves through next-hop addresses belonging to subnet 10.1.1.0/24. That subnet is attached to VBDIF1 and bridge domain BD1, which carries the corresponding Layer 2 VXLAN service. The VBDIF supplies a routed interface into a bridge domain, but the resulting transport from DC GW VTEP to leaf VTEP is an Ethernet frame encapsulated in VXLAN. Consequently the forwarding between these VXLAN endpoints is through a Layer 2 VXLAN tunnel.
Technical Deep Dive:
A is correct. The gateway performs a route lookup in VPN instance vpn1 and resolves the selected next-hop IP through the VBDIF1/BD1 connectivity. ARP/EVPN host reachability determines the Layer 2 destination associated with the remote leaf VTEP. The gateway encapsulates the resulting Ethernet frame using VXLAN and forwards the outer IP packet across the routed underlay. The leaf decapsulates the VXLAN packet and forwards traffic to the VNF. Using VBDIF for the route lookup does not by itself turn this particular transport into a Layer 3 VXLAN tunnel; the relevant BD carries the Layer 2 overlay. The alternative MPLS-label answer assumes a different transport encapsulation, while pure unencapsulated IP forwarding ignores the VXLAN fabric. On supported Huawei ASICs, VXLAN encapsulation, MAC lookup, and tunnel forwarding can occur in dedicated packet-processing hardware.
#######################################################


NEW QUESTION # 39
In BGP EVPN, which of the following route types is used to advertise external routes?

Answer: D

Explanation:
Huawei Reference Verification:
Huawei BGP EVPN defines route types to distribute distinct categories of Ethernet VPN reachability. Type 1 identifies Ethernet Auto-Discovery information, Type 2 MAC/IP bindings, Type 3 inclusive multicast information, and Type 4 Ethernet Segment information. Type 5 is the IP Prefix route and advertises IPv4/IPv6 prefixes, including external routes imported from another protocol or routing domain. RFC 9136 standardizes EVPN IP Prefix Advertisement route type 5. Therefore the correct selection for external IP-prefix reachability is B.
Technical Deep Dive:
B is correct. EVPN is an MP-BGP control plane capable of supporting Layer 2 bridging and Layer 3 service distribution over an MPLS or VXLAN transport. A remote subnet or imported external prefix does not require advertising every individual destination MAC address. Instead a Type 5 IP Prefix Advertisement announces the network prefix, attributes and associated next-hop information. A receiving PE imports it according to route-target policy, resolves the EVPN next hop and installs the forwarding entry in the correct tenant or VPN table. Type 2 MAC/IP routes mainly represent host address bindings, Type 3 supports BUM transport setup, Type 1 supports Ethernet Auto-Discovery and Type 4 Ethernet Segment information. Thus the presence of five offered route types does not make the question multi-answer: Type 5 alone is the IP-prefix route. VRP verification can use `display bgp evpn all routing-table` and the relevant VPN-instance route display.
#######################################################


NEW QUESTION # 40
......

By practicing under the real exam scenario of this Huawei H35-831 web-based practice test, you can cope with exam anxiety and appear in the final test with maximum confidence. You can change the time limit and number of questions of this Huawei H35-831 web-based practice test. This customization feature of our HCIE-Datacom-Carrier (Written) V1.0 (H35-831) web-based practice exam aids in practicing as per your requirements. You can assess and improve your knowledge with our Huawei H35-831 practice exam.

H35-831 Valid Exam Tutorial: https://www.prepawaypdf.com/Huawei/H35-831-practice-exam-dumps.html