최신SAP-C02덤프내용덤프는AWS Certified Solutions Architect - Professional (SAP-C02)시험문제의모든유형과범위를커버

2026 ExamPassdump 최신 SAP-C02 PDF 버전 시험 문제집과 SAP-C02 시험 문제 및 답변 무료 공유: https://drive.google.com/open?id=12E9sw4s53aiDuMtZMJ-uw1mbWa5vjzZm

여러분은 우리. ExamPassdump의Amazon SAP-C02시험자료 즉 덤프의 문제와 답만 있으시면Amazon SAP-C02인증시험을 아주 간단하게 패스하실 수 있습니다.그리고 관련 업계에서 여러분의 지위상승은 자연적 이로 이루어집니다. ExamPassdump의 덤프를 장바구니에 넣으세요. 그리고 ExamPassdump에서는 무료로 24시간 온라인상담이 있습니다.

Amazon SAP-C02 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Accelerate Workload Migration and Modernization	20%	- Migrate applications, data, and infrastructure - Develop migration strategies and plans - Modernize applications and data platforms - Integrate AWS services with existing systems
Topic 2: Design for New Solutions	29%	- Design cost-optimized architectures - Design high-performing and scalable solutions - Design for reliability and fault tolerance - Design secure and resilient architectures
Topic 3: Continuous Improvement for Existing Solutions	25%	- Apply security best practices and compliance updates - Implement monitoring, logging, and observability - Refactor and modernize legacy applications - Optimize existing workloads for cost, performance, and security
Topic 4: Design Solutions for Organizational Complexity	26%	- Design multi-account and multi-region architectures - Design for operational excellence and automation - Design hybrid and multi-cloud networking - Design for compliance and governance requirements

>> SAP-C02덤프내용 <<

시험패스 가능한 SAP-C02덤프내용 인증덤프자료

ExamPassdump의Amazon SAP-C02교육 자료는 고객들에게 높게 평가 되어 왔습니다. 그리고 이미 많은 분들이 구매하셨고Amazon SAP-C02시험에서 패스하여 검증된 자료임을 확신 합니다. Amazon SAP-C02시험을 패스하여 자격증을 취득하면IT 직종에 종사하고 계신 고객님의 성공을 위한 중요한 요소들 중의 하나가 될 것이라는 것을 잘 알고 있음으로 더욱 믿음직스러운 덤프로 거듭나기 위해 최선을 다해드리겠습니다.

최신 AWS Certified Solutions Architect SAP-C02 무료샘플문제 (Q83-Q88):

질문 # 83
A company has an organization in AWS Organizations. The company is using AWS Control Tower to deploy a landing zone for the organization. The company wants to implement governance and policy enforcement. The company must implement a policy that will detect Amazon RDS DB instances that are not encrypted at rest in the company's production OU.
Which solution will meet this requirement?

A. Create a custom SCP in AWS Control Tower. Apply the SCP to the production OU.
B. Enable the appropriate guardrail from the list of strongly recommended guardrails in AWS Control Tower. Apply the guardrail to the production OU.
C. Turn on mandatory guardrails in AWS Control Tower. Apply the mandatory guardrails to the production OU.
D. Use AWS Config to create a new mandatory guardrail. Apply the rule to all accounts in the production OU.

정답：B

질문 # 84
A company is running multiple workloads in the AWS Cloud. The company has separate units for software development. The company uses AWS Organizations and federation with SAML to give permissions to developers to manage resources in their AWS accounts. The development units each deploy their production workloads into a common production account.
Recently, an incident occurred in the production account in which members of a development unitterminated an EC2 instance that belonged to a different development unit. A solutions architect must create a solution that prevents a similar incident from happening in the future. The solution also must allow developers the possibility to manage the instances used for their workloads.
Which strategy will meet these requirements?

A. Pass an attribute for DevelopmentUnit as an AWS Security Token Service (AWS STS) session tag during SAML federation. Create an SCP with an allow action and a StringEquals condition for the DevelopmentUnit resource tag and aws:PrincipalTag/DevelopmentUnit. Assign the SCP to the root OU.
B. Create separate IAM policies for each development unit. For every IAM policy, add an allow action and a StringEquals condition for the DevelopmentUnit resource tag and the development unit name. During SAML federation, use AWS Security Token Service (AWS STS) to assign the IAM policy and match the development unit name to the assumed IAM role.
C. Create separate OUs in AWS Organizations for each development unit. Assign the created OUs to the company AWS accounts. Create separate SCPs with a deny action and a StringNotEquals condition for the DevelopmentUnit resource tag that matches the development unit name. Assign the SCP to the corresponding OU.
D. Pass an attribute for DevelopmentUnit as an AWS Security Token Service (AWS STS) session tag during SAML federation. Update the IAM policy for the developers' assumed IAM role with a deny action and a StringNotEquals condition for the DevelopmentUnit resource tag and aws:PrincipalTag/ DevelopmentUnit.

정답：D

설명：
This option allows the solutions architect to use session tags to pass additional information about the federated user, such as the development unit name, to AWS1. Session tags are key-value pairs that you can define in your identity provider (IdP) and pass in your SAML assertion1. By using a deny action and a StringNotEquals condition in the IAM policy, you can prevent developers from accessing or modifying EC2 instances that belong to a different development unit2. This way, you can enforce fine-grained access control and prevent accidental or malicious incidents.
Passing session tags in SAML assertions
Using tags for attribute-based access control

질문 # 85
A company has multiple business units that each have separate accounts on AWS. Each business unit manages its own network with several VPCs that have CIDR ranges that overlap.
The company's marketing team has created a new internal application and wants to make the application accessible to all the other business units. The solution must use private IP addresses only.
Which solution will meet these requirements with the LEAST operational overhead?

A. Create a Network Load Balancer (NLB) in front of the marketing application in a private subnet.Create an API Gateway API. Use the Amazon API Gateway private integration to connect the API to the NLB. Activate IAM authorization for the API. Grant access to the accounts of the other business units.
B. Create an AWS PrivateLink endpoint service to share the marketing application. Grant permission to specific AWS accounts to connect to the service. Create interface VPC endpoints in other accounts to access the application by using private IP addresses.
C. Create an Amazon EC2 instance to serve as a virtual appliance in the marketing account's VPC.
Create an AWS Site-to-Site VPN connection between the marketing team and each business unit's VPC. Perform NAT where necessary.
D. Instruct each business unit to add a unique secondary CIDR range to the business unit's VPC.
Peer the VPCs and use a private NAT gateway in the secondary range to route traffic to the marketing team.

정답：B

설명：
With AWS PrivateLink, the marketing team can create an endpoint service to share their internal application with other accounts securely using private IP addresses. They can grant permission to specific AWS accounts to connect to the service and create interface VPC endpoints in the other accounts to access the application by using private IP addresses. This option does not require any changes to the network of the other business units, and it does not require peering or NATing. This solution is both scalable and secure.

질문 # 86
A company runs an loT application in the AWS Cloud. The company has millions of sensors that collect data from houses in the United States. The sensors use the MOTT protocol to connect and send data to a custom MQTT broker. The MQTT broker stores the data on a single Amazon EC2 instance. The sensors connect to the broker through the domain named iot.example.com. The company uses Amazon Route 53 as its DNS service. The company stores the data in Amazon DynamoDB.
On several occasions, the amount of data has overloaded the MOTT broker and has resulted in lost sensor dat a. The company must improve the reliability of the solution.
Which solution will meet these requirements?

A. Create a Network Load Balancer (NLB). Set the MQTT broker as the target. Create an AWS Global Accelerator accelerator. Set the NLB as the endpoint for the accelerator. Update the DNS record in Route 53 to a multivalue answer record. Set the Global Accelerator IP addresses as values. Use the MQTT broker to store the data.
B. Set up AWS loT Core to receive the sensor data. Create and configure a custom domain to connect to AWS loT Core. Update the DNS record in Route 53 to point to the AWS loT Core Data-ATS endpoint. Configure an AWS loT rule to store the data.
C. Create an Application Load Balancer (ALB) and an Auto Scaling group for the MOTT broker. Use the Auto Scaling group as the target for the ALB. Update the DNS record in Route 53 to an alias record. Point the alias record to the ALB. Use the MQTT broker to store the data.
D. Set up AWS loT Greengrass to receive the sensor data. Update the DNS record in Route 53 to point to the AWS loT Greengrass endpoint. Configure an AWS loT rule to invoke an AWS Lambda function to store the data.

정답：C

설명：
it describes a solution that uses an Application Load Balancer (ALB) and an Auto Scaling group for the MQTT broker. The ALB distributes incoming traffic across the instances in the Auto Scaling group and allows for automatic scaling based on incoming traffic. The use of an alias record in Route 53 allows for easy updates to the DNS record without changing the IP address. This solution improves the reliability of the MQTT broker by allowing it to automatically scale based on incoming traffic, reducing the likelihood of lost data due to broker overload.
Reference:
https://aws.amazon.com/elasticloadbalancing/applicationloadbalancer/
https://aws.amazon.com/autoscaling/
https://aws.amazon.com/route53/

질문 # 87
A solutions architect is designing a network connectivity solution for a company. The solution must connect an on-premises network with all the company's current VPCs and any VPCs that the company creates in the future. The solution must enable communication between VPCs across five separate AWS Regions and must support at least 15 VPCs in each Region. The company expects to add more VPCs in each Region over time. The solution must provide maximum scalability and operational efficiency with minimal network latency. Which solution will meet these requirements with LEAST operational overhead?

A. Set up a transit gateway in each Region. Use AWS Global Accelerator to establish a redundant AWS Cloud WAN connection between the on-premises firewalls and each transit gateway between the on-premises network and the transit gateway in each Region. Route traffic between the Regions through the company's on-premises firewalls. Connect each VPC to the transit gateway that is in the same Region as the VPC.
B. Create an AWS Cloud Formation template for a redundant AWS Site-to-Site VPN tunnel to the on-premises network. Deploy the Cloud Formation template into each VPC. Set up VPC peering connections between all the VPCs for VPC-to-VPC communication.
C. Create an AWS Cloud Formation template for a redundant AWS Cloud WAN VPN tunnel to the on-premises network. Deploy the Cloud Formation template into each VPC. Route traffic between the Regions through the company's on-premises firewalls.
D. Set up a transit gateway in each Region. Set up a central transit gateway in one Region. Use transit gateway peering attachments to connect the transit gateways from all other Regions to the central transit gateway. Use AWS Global Accelerator to establish accelerated AWS Site-to-Site VPN connections between the on-premises network and the central transit gateway. Connect all current and future VPCs in each Region to their local Region's transit gateway by using VPC attachments.

정답：D

설명：
This is the most scalable and operationally efficient option among the choices because AWS Transit Gateway is the managed hub service designed to connect many VPCs and on-premises networks without needing large numbers of point-to-point connections. AWS documents that a transit gateway acts as a regional virtual router for VPCs and on-premises networks, and that inter-Region peering can connect transit gateways across Regions by using the AWS global infrastructure.
It also supports the requirement to add current and future VPCs over time with low operational overhead, because each VPC only needs a single attachment to its local regional transit gateway instead of a full mesh of peering connections. AWS notes that transit gateways support transitive routing and avoid the need to add peer relationships between every VPC.
The accelerated Site-to-Site VPN part is also valid. AWS documents that accelerated VPN uses AWS Global Accelerator to route traffic from the on-premises customer gateway to the nearest AWS edge location and then over the AWS global network, which improves performance compared with ordinary internet-routed VPN traffic.

질문 # 88
......

ExamPassdump는 우수한 IT인증시험 공부가이드를 제공하는 전문 사이트인데 업계에서 높은 인지도를 가지고 있습니다. ExamPassdump에서는 IT인증시험에 대비한 모든 덤프자료를 제공해드립니다. Amazon인증 SAP-C02시험을 준비하고 계시는 분들은ExamPassdump의Amazon인증 SAP-C02덤프로 시험준비를 해보세요. 놀라운 고득점으로 시험패스를 도와드릴것입니다.시험에서 불합격하면 덤프비용 전액환불을 약속드립니다.

SAP-C02 PDF: https://www.exampassdump.com/SAP-C02_valid-braindumps.html

그 외, ExamPassdump SAP-C02 시험 문제집 일부가 지금은 무료입니다: https://drive.google.com/open?id=12E9sw4s53aiDuMtZMJ-uw1mbWa5vjzZm