Prominent Features of {Amazon} Amazon SAP-C02 Exam Questions

BONUS!!! Download part of 2Pass4sure SAP-C02 dumps for free: https://drive.google.com/open?id=1K1HPr_vbzVXX4Zm6U4FrUNAytk8wXsZb

You might have seen lots of advertisements about SAP-C02 learning question, there are so many types of SAP-C02 exam material in the market, why you should choose us? Our reasons are as follow. Our SAP-C02 test guide is test-oriented, which makes the preparation become highly efficient. Once you purchase our SAP-C02 exam material, your time and energy will reach a maximum utilization. Thus at that time, you would not need to afraid of the cruel society and peer pressure with SAP-C02 Certification. In conclusion, a career enables you to live a fuller and safer life. So if you want to take an upper hand and get a well-pleasing career our SAP-C02 learning question would be your best friend.

Amazon SAP-C02 Exam Syllabus Topics:

Section	Weight	Objectives
Design solutions for organizational complexity	26%
Continuous improvement for existing solutions	25%
Design for new solutions	29%
Accelerate workload migration and modernization	20%

>> SAP-C02 Real Brain Dumps <<

SAP-C02 Latest Braindumps, Valid Dumps SAP-C02 Book

2Pass4sure's pledge to customers is that we can help customers 100% pass their IT certification exams. The quality of 2Pass4sure's product has been recognized by many IT experts. The most important characteristic of our products is their pertinence. It only takes 20 hours for you to complete the training course and then easily pass your first time to attend Amazon Certification SAP-C02 Exam. You will not regret to choose 2Pass4sure, because choosing it represents the success.

Amazon AWS Certified Solutions Architect - Professional (SAP-C02) Sample Questions (Q803-Q808):

NEW QUESTION # 803
A company stores data on an Amazon RDS for PostgreSQL DB instance in a private subnet in an AWS database account. Applications that are deployed in different VPCs access this data from different AWS accounts.
The company needs to manage the number of active connections to the DB instance.
Communication between all accounts and the database account must be private and must not travel across the internet. The solution must be scalable to accommodate more consumer accounts in the future.
Which solution will meet these requirements?

A. Connect all the VPCs in all the accounts by using a transit gateway. Configure a NAT gateway in a public subnet. Route traffic from the NAT gateway through the transit gateway to the DB instance.
B. Create a VPC peering connection between the VPC that contains the DB instance and each VPC from the other accounts. Configure an Application Load Balancer to provide access to the DB instance through the peering connection.
C. Create an RDS proxy in the AWS database account. Create a proxy endpoint in the private subnet. Configure AWS PrivateLink with a Network Load Balancer to provide access to the DB instance.
D. Create a VPC peering connection between the VPC that contains the DB instance and each VPC from the other accounts. Configure a NAT gateway in a public subnet to route traffic to the DB instance.

Answer: C

Explanation:
Using RDS Proxy in combination with AWS PrivateLink provides a scalable and secure solution to manage connections to the RDS for PostgreSQL DB instance. RDS Proxy helps manage the number of active connections by pooling and sharing database connections, reducing the load on the DB instance. AWS PrivateLink allows private communication between VPCs, ensuring that traffic does not travel across the internet. By using a Network Load Balancer (NLB) with PrivateLink, each consumer account can securely access the DB instance without needing complex routing or NAT gateways. This solution is scalable for future accounts and ensures private communication.

NEW QUESTION # 804
A company uses an on-premises data analytics platform. The system is highly available in a fully redundant configuration across 12 servers in the company's data center.
The system runs scheduled jobs, both hourly and daily, in addition to one-time requests from users. Scheduled jobs can take between 20 minutes and 2 hours to finish running and have tight SLAs. The scheduled jobs account for 65% of the system usage. User jobs typically finish running in less than 5 minutes and have no SLA.
The user jobs account for 35% of system usage. During system failures, scheduled jobs must continue to meet SLAs. However, user jobs can be delayed.
A solutions architect needs to move the system to Amazon EC2 instances and adopt a consumption-based model to reduce costs with no long-term commitments. The solution must maintain high availability and must not affect the SLAs.
Which solution will meet these requirements MOST cost-effectively?

A. Split the 12 instances across three Availability Zones in the chosen AWS Region. Run two instances in each Availability Zone as On-Demand Instances with a Savings Plan. Run two instances in each Availability Zone as Spot Instances.
B. Split the 12 instances across three Availability Zones in the chosen AWS Region. In one of the Availability Zones, run all four instances as On-Demand Instances with Capacity Reservations. Run the remaining instances as Spot Instances.
C. Split the 12 instances across three Availability Zones in the chosen AWS Region. Run three instances in each Availability Zone as On-Demand Instances with Capacity Reservations. Run one instance in each Availability Zone as a Spot Instance.
D. Split the 12 instances across two Availability Zones in the chosen AWS Region. Run two instances in each Availability Zone as On-Demand Instances with Capacity Reservations. Run four instances in each Availability Zone as Spot Instances.

Answer: C

NEW QUESTION # 805
A solutions architect has an operational workload deployed on Amazon EC2 instances in an Auto Scaling Group The VPC architecture spans two Availability Zones (AZ) with a subnet in each that the Auto Scaling group is targeting. The VPC is connected to an on-premises environment and connectivity cannot be interrupted The maximum size of the Auto Scaling group is 20 instances in service. The VPC IPv4 addressing is as follows:
VPCCIDR 10 0 0 0/23
AZ1 subnet CIDR: 10 0 0 0724
AZ2 subnet CIDR: 10.0.1 0724
Since deployment, a third AZ has become available in the Region The solutions architect wants to adopt the new AZ without adding additional IPv4 address space and without service downtime. Which solution will meet these requirements?

A. Update the Auto Scaling group to use the AZ2 subnet only Update the AZ1 subnet to have halt the previous address space Adjust the Auto Scaling group to also use the AZ1 subnet again. When the instances are healthy, adjust the Auto Seating group to use the AZ1 subnet only. Update the current AZ2 subnet and assign the second half of the address space from the original AZ1 subnet Create a new AZ3 subnet using half the original AZ2 subnet address space, then update the Auto Scaling group to target all three new subnets
B. Update the Auto Scaling group to use the AZ2 subnet only Delete and re-create the AZ1 subnet using half the previous address space Adjust the Auto Scaling group to also use the new AZI subnet When the instances are healthy, adjust the Auto Scaling group to use the AZ1 subnet only Remove the current AZ2 subnet Create a new AZ2 subnet using the second half of the address space from the original AZ1 subnet Create a new AZ3 subnet using half the original AZ2 subnet address space, then update the Auto Scaling group to target all three new subnets.
C. Create a new VPC with the same IPv4 address space and define three subnets, with one for each AZ Update the existing Auto Scaling group to target the new subnets in the new VPC
D. Terminate the EC2 instances in the AZ1 subnet Delete and re-create the AZ1 subnet using hall the address space. Update the Auto Scaling group to use this new subnet. Repeat this for the second AZ.
Define a new subnet in AZ3: then update the Auto Scaling group to target all three new subnets

Answer: B

Explanation:
https://repost.aws/knowledge-center/vpc-ip-address-range

NEW QUESTION # 806
A travel company built a web application that uses Amazon Simple Email Service (Amazon SES) to send email notifications to users. The company needs to enable logging to help troubleshoot email delivery issues. The company also needs the ability to do searches that are based on recipient, subject, and time sent.
Which combination of steps should a solutions architect take to meet these requirements?
(Choose two.)

A. Create an Amazon SES configuration set with Amazon Data Firehose as the destination. Choose to send logs to an Amazon S3 bucket.
B. Use Amazon Athena to query the logs in Amazon CloudWatch for recipient, subject, and time sent.
C. Enable AWS CloudTrail logging. Specify an Amazon S3 bucket as the destination for the logs.
D. Create an Amazon CloudWatch log group. Configure Amazon SES to send logs to the log group.
E. Use Amazon Athena to query the logs in the Amazon S3 bucket for recipient, subject, and time sent.

Answer: B,D

Explanation:
https://aws.amazon.com/blogs/messaging-and-targeting/how-to-log-amazon-ses-details-using- amazon-cloudwatch/

NEW QUESTION # 807
A solutions architect needs to define a reference architecture for a solution for three-tier applications with web. application, and NoSQL data layers. The reference architecture must meet the following requirements:
- High availability within an AWS Region
- Able to fail over in 1 minute to another AWS Region for disaster
recovery
- Provide the most efficient solution while minimizing the impact on
the user experience
Which combination of steps will meet these requirements? (Choose three.)

A. Use an Amazon Route 53 failover routing policy for failover from the primary Region to the disaster recovery Region. Set Time to Live (TTL) to 30 seconds.
B. Use Auto Scaling groups for the web and application layers across multiple Availability Zones in the Regions. Use Spot Instances for the required resources.
C. Implement a hot standby model using Auto Scaling groups for the web and application layers across multiple Availability Zones in the Regions. Use zonal Reserved Instances for the minimum number of servers and On-Demand Instances for any additional resources.
D. Use a global table within Amazon DynamoDB so data can be accessed in the two selected Regions.
E. Back up data from an Amazon DynamoDB table in the primary Region every 60 minutes and then write the data to Amazon S3. Use S3 cross-Region replication to copy the data from the primary Region to the disaster recovery Region. Have a script import the data into DynamoDB in a disaster recovery scenario.
F. Use an Amazon Route 53 weighted routing policy set to 100/0 across the two selected Regions.
Set Time to Live (TTL) to 1 hour.

Answer: A,C,D

NEW QUESTION # 808
......

2Pass4sure Amazon SAP-C02 exam questions are compiled according to the latest syllabus and the actual SAP-C02 certification exam. We are also constantly upgrade our training materials so that you could get the best and the latest information for the first time. When you buy our SAP-C02 Exam Training materials, you will get a year of free updates. At any time, you can extend the the update subscription time, so that you can have a longer time to prepare for the exam.

SAP-C02 Latest Braindumps: https://www.2pass4sure.com/AWS-Certified-Solutions-Architect/SAP-C02-actual-exam-braindumps.html

P.S. Free & New SAP-C02 dumps are available on Google Drive shared by 2Pass4sure: https://drive.google.com/open?id=1K1HPr_vbzVXX4Zm6U4FrUNAytk8wXsZb