We will be happy to assist you with any questions regarding our products. Our Fortinet NSE7_SSE_AR-26 practice exam software helps to prepare applicants to practice time management, problem-solving, and all other tasks on the standardized exam and lets them check their scores. The Fortinet NSE7_SSE_AR-26 Practice Test results help students to evaluate their performance and determine their readiness without difficulty.
| Section | Objectives |
|---|---|
| Topic 1: FortiSASE Architecture and Design | - Design secure internet access (SIA) - Design secure private access (SPA) - Select appropriate deployment models - Design secure SaaS access (SSA) |
| Topic 2: Integration | - FortiGate integration - SD-WAN integration - Enterprise networking scenarios |
| Topic 3: Policy and Security Services | - DNS filtering - Threat protection - Application control - Security policy design - Web filtering |
| Topic 4: Identity and Access | - Endpoint posture and compliance - Authentication and identity providers - Zero Trust Network Access (ZTNA) |
| Topic 5: Operations and Troubleshooting | - Troubleshooting deployment and connectivity - Centralized management - Log analysis - Monitoring and analytics |
>> Reliable NSE7_SSE_AR-26 Test Preparation <<
Being anxious for the exam ahead of you? Have a look of our NSE7_SSE_AR-26 practice materials please. Presiding over the line of NSE7_SSE_AR-26 practice materials over ten years, our experts are proficient as elites who made our NSE7_SSE_AR-26 practice materials, and it is their job to officiate the routines of offering help for you. All points are predominantly related with the exam ahead of you. Every page is full of well-turned words for your reference related wholly with the real exam.
NEW QUESTION # 67
An administrator is attempting to create two static routes: one for the SD-WAN zone wan-link and one pointing to a specific SD-WAN member interface that currently belongs to the wan-link zone.
Which configuration is required to make this scenario valid? (Choose one answer.)
Answer: C
Explanation:
According to the Fortinet SD-WAN 7.6 Core Administrator Study Guide, Routing and Sessions, page 193, FortiOS supports static routes referencing SD-WAN zones and individual member interfaces. However, duplicate destination routes cannot simultaneously reference a zone and one of its individual member interfaces.
Option A is correct: FortiOS requires the two static routes to have different destination prefixes. When a static route references an SD-WAN zone, FortiGate creates forwarding entries for the members belonging to that zone. Configuring an additional route with the identical destination prefix through an individual member creates a conflicting route definition.
Overlapping destination networks are permitted when their prefixes differ. For example, a zone-based route could reference 10.0.0.0/8, while a member-specific route references 10.2.0.0/16.
Option B is incorrect: Equal administrative distance does not resolve the duplicate-route restriction. ECMP is not a substitute for valid route configuration.
Option C is incorrect: FortiOS supports default static routes (0.0.0.0/0) referencing SD-WAN zones.
Option D is incorrect: SD-WAN members can include physical interfaces, VLAN interfaces, IPsec tunnels, and other supported interface types.
Therefore, the two static routes must have different destination prefixes, although overlapping networks are allowed.
Exact Source References:
* Fortinet SD-WAN 7.6 Core Administrator Study Guide, pages 192-193 - Routing and Sessions.
* FortiOS 7.6 Administration Guide - Adding a Static Route and SD-WAN Members and Zones.
NEW QUESTION # 68
Refer to the exhibits. The interface details, static route configuration, and firewall policies on the managed FortiGate device are shown. You want to configure a new SD-WAN zone, named Underlay, that contains the interfaces port1 and port2. What must be your first action?
Exhibit 1
Exhibit 2
Answer: B
Explanation:
The question asks what must be done first before two existing physical interfaces can be moved into an SD- WAN zone. The exhibit shows firewall policies referencing port1 directly, and FortiOS does not permit firewall policies to continue referring to interfaces after those interfaces become SD-WAN members. Option D is therefore a reasonable practical first action: remove or modify the direct-interface firewall-policy references. However, the screenshot also shows static routes referencing the same interface. Those route references can likewise require adjustment. FortiOS does not establish a universal ordering that says firewall policies must always be modified before static routes; both changes may be required to complete the migration. Thus the single-answer design is ambiguous even though D is the preferred remediation in the previous review. The administrator should perform an interface-reference audit, move firewall policies to the intended SD-WAN zone, recreate appropriate zone-based static routes, and then configure the SD-WAN members. The default virtual-wan-link zone and other user-defined zones need not be deleted merely because an interface changes membership. The FortiOS 7.6 Members and Zones documentation establishes the relevant referencing restriction.
Verification qualification: Both firewall policy references and static-route dependencies may need changes; the mandated first action is ambiguous.
References: https://docs.fortinet.com/document/fortigate/7.6.3/administration-guide/942095/sd-wan-members- and-zones; https://docs.fortinet.com/document/fortigate/7.6.3/administration-guide/270527/specify-an-sd- wan-zone-in-static-routes-and-sd-wan-rules
NEW QUESTION # 69
SD-WAN interacts with many other FortiGate features. Some of them are required to allow SD-WAN to steer the traffic. Which three configuration elements that you must configure before FortiGate can steer traffic according to SD-WAN rules? (Choose three.)
Answer: C,D,E
Explanation:
Before FortiGate can steer traffic according to SD-WAN rules, certain configuration elements must be present. Fortinet SD-WAN design guidance describes the required elements: " SD-WAN is not a standalone feature and interacts with several fundamental FortiGate configurations. Specifically, you must: (1) Define the interfaces (physical, VLAN, or IPsec) that will act as SD-WAN members, (2) Create firewall policies to allow traffic to be steered by SD-WAN, and (3) Set up routing so that traffic has valid routes via SD-WAN members. Without these, SD-WAN rules will not be able to match or steer any traffic. " Security profiles and traffic shaping are not mandatory for basic SD-WAN steering but can be layered on for enhanced security and QoS once foundational elements are present.References: A deployment should preserve the distinction between the physical or logical WAN underlay, the IPsec overlay and the SD-WAN zone that groups forwarding members. These layers can have different routing and security-policy requirements. The configured architecture must also allow the required traffic paths and failover behavior rather than assuming every available interface is interchangeable.
References: https://docs.fortinet.com/document/fortigate/7.6.3/administration-guide/942095/sd-wan-members- and-zones; https://docs.fortinet.com/document/fortigate/7.6.3/administration-guide/270527/specify-an-sd-wan- zone-in-static-routes-and-sd-wan-rules
NEW QUESTION # 70
Refer to the exhibit. Which action will FortiGate take if it detects SD-WAN members as dead?
Answer: A
Explanation:
With SD-WAN failure detection enabled and port5 configured as the fail-alert-interface, FortiGate uses the health checks with update-cascade-interface enable to track the SD-WAN members.
The fail-alert interface is brought down when the SD-WAN is considered failed, which occurs when all monitored SD-WAN members are dead. Therefore, FortiGate brings down port5 after all SD-WAN members are detected as unavailable.
Reference:
https://docs.fortinet.com/document/fortigate/8.0.0/administration-guide/321562/failure-detection-for-aggregate-and-redundant-interfaces
https://docs.fortinet.com/document/fortigate/8.0.0/cli-reference/838040159/config-system-sdwan
NEW QUESTION # 71
Which two components are part of onboarding a proxy-based endpoint for secure internet access (SIA)?
(Choose two.)
Answer: B,D
Explanation:
FortiSASE proxy-based secure internet access allows managed and unmanaged endpoints to use cloud- delivered security controls without requiring the FortiClient endpoint agent.
Option A is correct because a proxy auto-configuration file can define how browsers and operating systems redirect eligible HTTP and HTTPS requests to the FortiSASE secure web gateway.
A PAC file allows automatic proxy selection based on destination URLs, hostnames, and other conditions.
FortiSASE supports hosted and downloadable PAC file configurations, simplifying deployment across large endpoint populations.
Option B is correct because endpoints should install and trust the FortiSASE certificate authority certificate when SSL deep inspection is required. During TLS inspection, FortiSASE decrypts permitted traffic for security analysis and presents certificates that must be trusted by the endpoint.
Without the appropriate certificate, browsers and applications may reject inspected HTTPS connections because the signing authority is untrusted.
Option C is incorrect because FortiClient is associated with agent-based endpoint connectivity. Proxy-based deployment can operate without installing FortiClient.
Option D is incorrect because a tunnel policy applies to tunnel-based traffic handling rather than constituting an endpoint onboarding component for explicit proxy access.
PAC configuration provides traffic steering, while CA certificate installation establishes the certificate trust needed for SSL inspection.
References: FortiSASE 25 Enterprise Administrator Study Guide - Fortinet SASE Solution and SWG; FortiSASE 25.3 Agentless Proxy Deployment Guide - Configuring Proxy Settings on Endpoints and Installing the FortiSASE CA Certificate.
NEW QUESTION # 72
......
Would you like to register Fortinet NSE7_SSE_AR-26 certification test? Would you like to obtain NSE7_SSE_AR-26 certificate? Without having enough time to prepare for the exam, what should you do to pass your exam? In fact, there are techniques that can help. Even if you have a very difficult time preparing for the exam, you also can pass your exam successfully. How do you do that? The method is very simple, that is to use Pass4sures Fortinet NSE7_SSE_AR-26 Dumps to prepare for your exam.
NSE7_SSE_AR-26 Real Dumps Free: https://www.pass4sures.top/NSE-7-Network-Security-Architect/NSE7_SSE_AR-26-testking-braindumps.html