At Pass4guide, we understand your needs when it comes to passing the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) Certification exam. If you prefer studying at home for the NSEI_OTS_AR-7.6 Exam, we have got you covered. Pass4guide offers NSEI_OTS_AR-7.6 exam questions in PDF format, which can be easily downloaded and accessed on all your devices. Moreover, the Fortinet NSEI_OTS_AR-7.6 Actual Questions PDF file will be available for immediate download right after your purchase, eliminating any waiting time.
| Section | Objectives |
|---|---|
| Network security | - Configure virtual patching - Configure automation - Configure security inspections for industrial protocols |
| Network access control | - Configure network access authentication - Configure network segmentation schemas - Explain OT Ethernet concepts |
| Asset management | - Implement device detection on FortiGate and FortiNAC - Explain OT standard and Fortinet compliance - Fortinet Security Fabric for an OT network |
| Monitoring and risk assessment | - Analyze security reports from FortiAnalyzer - Perform risk assessment and management - Create FortiAnalyzer event handlers |
>> NSEI_OTS_AR-7.6 Reliable Exam Questions <<
To pass the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) certification exam you need to prepare well with the help of top-notch NSEI_OTS_AR-7.6 exam questions which you can download from Pass4guide platform. On this platform, you will get valid, updated, and real Pass4guide NSEI_OTS_AR-7.6 Dumps for quick exam preparation.
NEW QUESTION # 21
Refer to the exhibits.
A partial Incident Analysis page and the log details related to the event are shown. An attack is reported on your OT network. You analyze the corresponding incident. Based on the information provided on the Incident Analysis page and the log details, which two statements are correct? (Choose two answers)
Answer: B,E
Explanation:
Based on the technical data provided in the exhibits and the OT Security 7.6 Architect curriculum:
* Industrial Protocol Identification (Statement A) : The log details exhibit clearly shows that the Destination Port used in the attack is 502 . According to the study guide ' s section on Industrial Protocol Protection , the standard port used by the Modbus TCP protocol is 502 . Furthermore, the attack name identifies a " Triangle.Research.Nano-10.PLC, " which are industrial controllers commonly utilizing Modbus for communications.
* Attack Mitigation (Statement B) : The log details specify that the Action taken by the FortiGate (Edge-FortiGate) was dropped . In cybersecurity and Fortinet fabric operations, dropping a packet associated with an IPS signature means the traffic was blocked from reaching its target, thereby mitigating the attack.
* Target IP Address (Statement E) : The log detail explicitly lists the Destination IP as 192.168.2.3 .
The Incident Analysis page also titles the incident with dstip:192.168.2.3. While the " Affected Endpoint " is shown as 10.1.5.20 , in an " outgoing " attack direction (as shown in the log), this likely refers to the internal source/attacker IP, whereas the target is the destination IP (192.168.2.3). Thus, Statement E is incorrect.
* Protocol Conflict (Statement C) : The IEC 104 protocol typically utilizes port 2404 . Since the log specifies port 502, Statement C is incorrect.
* Severity Distinction (Statement D) : While the Incident severity is marked as High , the question specifically asks about event severity. The " Events " table at the bottom of the Incident Analysis page shows a " User login/logout failed " event with a medium severity. Because there is a distinction in the management console between the severity of individual events and the aggregated incident, and Statement A and B are technically definitive based on port and action, A and B are the correct architectural choices.
NEW QUESTION # 22
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in firewall policy, which two statements are correct? (Choose two answers)
Answer: B,C
Explanation:
The correct answers are A and C . The study guide explains that "You can use application control signatures to detect OT protocols" and that application control provides "granular message type identification." In the exhibit, the Operational Technology application category is included in the Application Sensor profile, so OT application signatures are enabled in this profile.
Option C is also correct because the override table shows Modbus_Read.Holding.Registers = Allow and Modbus = Block . The study guide states that you can use specific granular application control signatures to allow a specific Modbus command and block all others , and it also shows that application control can identify read and write commands separately at message level. Therefore, Modbus write commands are blocked by this profile.
Option B is incorrect because the profile is not simply monitoring all OT protocols; it contains a Block action for Modbus. Option D is incorrect because the study guide links OT protocol visibility specifically to the monitor status , while in the exhibit Modbus_Read.Holding.Registers is set to Allow , not Monitor .
NEW QUESTION # 23
Which characteristic do the following industrial protocols share: Ethernet/IP, EtherCAT, and POWERLINK?
Answer: B
Explanation:
The correct answer is A . The study guide describes all three protocols as supporting deterministic or real-time industrial communication. Ethernet/IP uses standard Ethernet and TCP/IP with an application-layer mechanism that can provide real-time communication when deployed within an appropriate limited range.
EtherCAT explicitly provides real-time communication in a primary-secondary architecture and achieves its performance by skipping OSI layers 3 through 6. POWERLINK is also explicitly defined as a real-time communication protocol used mainly for transmitting process data. They do not all follow the complete OSI model because EtherCAT bypasses several layers and POWERLINK primarily uses layers 2 and 7. Client- server behavior is specifically associated with Modbus , and star/ring topology characteristics relate to redundancy mechanisms such as PRP, MRP, and HSR rather than these three industrial protocols collectively.
NEW QUESTION # 24
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in a firewall policy, which two statements are correct? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are A and C .
Option C is correct because the profile clearly contains the Operational Technology category and specific OT application signatures such as Modbus and IEC.60870.5.104 . The study guide says "You can use application control signatures to detect OT protocols" and "You can filter to a specific OT protocol." That means OT application signatures are active in this sensor profile.
Option A is correct because the guide explains that application control works at different levels: "Detection of protocol (one detection per session)" and "Message level (one detection per protocol message)." It also says you can use application signatures for "granular message type identification." In the exhibit, IEC.
60870.5.104.Control.Functions is explicitly configured, which is a granular IEC message/control-level signature rather than only a protocol-level match. That means logging and control can occur at the IEC command level.
Option B is not correct because the profile shows Modbus configured at the parent protocol level as Monitor
, while the guide states that the "parent signature takes precedence over the child signature." Since protocol-level detection is one detection per session , that does not mean FortiGate will necessarily log each Modbus command individually.
Option D is incorrect because even though the broader Operational Technology category is set to block, the profile includes specific application and filter overrides for Modbus and IEC 104 behavior. So the resulting effect is not simply that all OT protocols are blocked .
NEW QUESTION # 25
Refer to the exhibit.
A partial OT network is shown. You have configured the FortiGate device with VLANs to segment the OT network. The supervisor now wants to connect to the PLC from the Engineering Workstation. How can you allow access from the Engineering Workstation to the PLC? (Choose one answer)
Answer: B
Explanation:
The correct answer is D. You must configure a layer 3 switch .
The study guide explains that "Layer 2 devices can add or remove tags" but "cannot modify them." It then states that "A layer 3 device, such as a router or FortiGate, can modify the VLAN tag before routing the packet. This allows them to route traffic between VLANs." It also explicitly describes
"Router on a Stick" as "a way to allow routing between VLANs." Since the exhibit shows a layer-2 switch and the Engineering Workstation and PLC are placed in different VLANs, inter-VLAN communication requires layer-3 routing.
The other options do not solve this requirement. intra-switch-policy explicit/implicit applies to a software switch , where member interfaces are in the same broadcast domain and same subnet, not to routing between separate VLANs. forward domain IDs are used in transparent mode to confine broadcasts to specific broadcast domains; they do not provide inter-VLAN access. Therefore, to let the Engineering Workstation in one VLAN reach the PLC in another VLAN, you need a layer 3 routing function , which matches option D .
NEW QUESTION # 26
......
Our company has authoritative experts and experienced team in related industry. To give the customer the best service, all of our NSEI_OTS_AR-7.6 exam dump is designed by experienced experts from various field, so our NSEI_OTS_AR-7.6 Learning materials will help to better absorb the test sites. One of the great advantages of buying our product is that can help you master the core knowledge in the shortest time. At the same time, our NSEI_OTS_AR-7.6 exam dumps discard the most traditional rote memorization methods and impart the key points of the qualifying exam in a way that best suits the user's learning interests, this is the highest level of experience that our most authoritative think tank brings to our NSEI_OTS_AR-7.6 Study Guide users. Believe that there is such a powerful expert help, our users will be able to successfully pass the qualification test to obtain the qualification certificate.
NSEI_OTS_AR-7.6 Latest Test Online: https://www.pass4guide.com/NSEI_OTS_AR-7.6-exam-guide-torrent.html