BTW, DOWNLOAD part of ExamsTorrent EDGE-Expert dumps from Cloud Storage: https://drive.google.com/open?id=1zRQKMWFSuhYs7dBJ6ybeh7WfS488r-dD
Are you a new comer in your company and eager to make yourself outstanding? Our EDGE-Expert exam materials can help you. After a few days' studying and practicing with our products you will easily pass the EDGE-Expert examination. God helps those who help themselves. If you choose our EDGE-Expert Study Guide, you will find God just by your side. The only thing you have to do is just to make your choice and study. Isn't it very easy? So know more about our EDGE-Expert practice engine right now!
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
| Topic 2: Software & Methodology | 25% | - EDGE Software Interface
|
| Topic 3: Energy Efficiency | 25% | - Energy Consumption
|
| Topic 4: EDGE System Overview | 15% | - Building Types & Applicability
|
| Topic 5: Water Efficiency & Materials | 25% | - Water Demand
|
>> EDGE-Expert Interactive EBook <<
We promise that using EDGE-Expert certification training materials of ExamsTorrent, you will pass EDGE-Expert exam in your first try. If not or any problems in EDGE-Expert certification training materials, we will refund fully. What's more, after you purchase our EDGE-Expert Certification Training materials, ExamsTorrent will offer update service in one year.
NEW QUESTION # 85
Which of the following measures require testing by the EDGE Auditor at the site audit?
Answer: D
Explanation:
According to the CBCI EDGE certification procedures, certain measures require physical verification and performance testing during the site audit to confirm that installed systems match the design-stage commitments entered in the EDGE software. Low-flow faucets for bathrooms fall into this category because their compliance depends on measurable flow rates. During the audit, the EDGE Auditor may use flow- measuring devices to test fixture discharge rates and verify that they meet the specified liters per minute used in the improved case calculations. This ensures that projected water savings are genuinely achieved in practice.
In contrast, measures such as a green roof are typically verified visually and through documentation such as drawings and material specifications rather than performance testing. Condensate water recovery and wastewater treatment systems are usually confirmed through installed system inspection, capacity checks, and documentation review, but not necessarily through direct flow-rate testing at each fixture point like low-flow faucets. The curriculum emphasizes that fixtures with defined performance parameters, such as flow rates, are subject to on-site testing to maintain the integrity and credibility of EDGE water savings claims.
NEW QUESTION # 86
How often should the EDGE Zero Carbon certification be renewed?
Answer: D
Explanation:
EDGE Zero Carbon certification requires periodic renewal to ensure ongoing compliance with zero carbon standards, particularly since it often involves carbon offsets or renewable energy commitments that may change over time. The EDGE Certification Protocol specifies the renewal timeline: "EDGE Zero Carbon certification must be renewed initially after two years to verify that the building continues to meet the zero carbon requirements, including the use of carbon offsets or renewable energy. Subsequently, renewal is required every four years to ensure long-term compliance with the standard" (EDGE Certification Protocol, Section 2.3: Certification Levels). Option A, initially after two years, subsequently every four years, directly matches this requirement.Option B (initially after four years, subsequently every two years) reverses the timeline, which does not align with the protocol: "The initial two-year renewal ensures early verification, while the four-year cycle applies thereafter to balance monitoring with practicality" (EDGE Certification Protocol, Section 2.3: Certification Levels). Option C (every two years if using carbon offsets, or every four years if using 100% renewable energy) and Option D (every four years if using carbon offsets, or every two years if using 100% renewable energy) introduce a distinction based on the method of achieving zero carbon status, which is not supported by EDGE documentation: "The renewal timeline for EDGE Zero Carbon is consistent regardless of whether carbon offsets or renewable energy are used, as both methods require ongoing verification of performance and offset purchases" (EDGE User Guide, Section 6.3: Advanced Certifications). The EDGE Methodology Report adds: "The two-year initial renewal allows for confirmation of operational data and offset validity, while the four-year subsequent renewal cycle ensures sustained commitment without excessive administrative burden" (EDGE Methodology Report Version 2.0, Section 2.3:
Zero Carbon Calculations). The EDGE User Guide further confirms: "EDGE Zero Carbon certification renewal follows a standard schedule of two years initially, then every four years, to maintain the integrity of the zero carbon claim over time" (EDGE User Guide, Section 6.3: Advanced Certifications). Thus, the correct renewal schedule is initially after two years, then every four years (Option A).
Reference:EDGE Certification Protocol, Section 2.3: Certification Levels; EDGE User Guide Version 2.1, Section 6.3: Advanced Certifications; EDGE Methodology Report Version 2.0, Section 2.3: Zero Carbon Calculations.
NEW QUESTION # 87
A building achieved EDGE certification three years ago and obtained 30% energy savings. Solar panels have been added, which increased the energy savings to 60%. If carbon offsets are purchased for the remainder of the energy use, when should an EDGE Zero Carbon certification application be filed?
Answer: D
Explanation:
EDGE Zero Carbon certification requires specific prerequisites and operational data to verify performance.
The EDGE Certification Protocol details the requirements: "To apply for EDGE Zero Carbon certification, a project must first achieve EDGE Advanced certification, which requires at least 40% energy savings.
Additionally, EDGE Zero Carbon certification mandates at least one year of operational data at 75% occupancy to confirm energy performance, after which carbon offsets can be purchased for the remaining energy use to achieve zero carbon status" (EDGE Certification Protocol, Section 2.3: Certification Levels). In this scenario, the building's energy savings have increased to 60% with solar panels, qualifying it for EDGE Advanced (40% minimum). The next step is to gather one year of operational data before applying for EDGE Zero Carbon, making Option C (after achieving EDGE Advanced certification and gathering one year of operational data) correct. Option A (as soon as one year of operational data) skips the EDGE Advanced requirement: "EDGE Advanced is a prerequisite for EDGE Zero Carbon" (EDGE Certification Protocol, Section 2.3: Certification Levels). Option B (no wait time) is incorrect, as operational data is mandatory:
"Operational data is required to verify performance for Zero Carbon certification" (EDGE User Guide, Section 6.3: Advanced Certifications). Option D (at the same time as EDGE Advanced and after two years) is wrong, as only one year of data is needed: "One year of operational data at 75% occupancy is sufficient for EDGE Zero Carbon" (EDGE Certification Protocol, Section 2.3: Certification Levels). Thus, Option C is the correct timeline.
Reference:EDGE Certification Protocol, Section 2.3: Certification Levels; EDGE User Guide Version 2.1, Section 6.3: Advanced Certifications.
NEW QUESTION # 88
A Client is developing two identical hotels in different cities but finds that the energy intensity (kWh/m²/year) of the hotels are different. Which of the following difference in these two cities could have caused this?
Answer: C
Explanation:
In the EDGE methodology, the baseline and improved-case energy calculations are highly dependent on local climate conditions because climate directly affects heating and cooling demands. Even if two hotels are identical in design, construction, and systems, their modeled energy intensity can differ if they are located in cities with different temperature profiles, humidity levels, solar radiation, and seasonal variations. In hotter or more humid climates, cooling loads and dehumidification energy increase; in colder climates, heating loads increase. EDGE uses location-specific weather data to determine these loads, which then influences the annual delivered energy consumption expressed in kWh per square meter per year.
Electricity prices do not affect energy intensity because kWh/m²/year is a consumption metric, not a cost metric. Cost of materials may influence project budgeting and material choices, but it does not directly change the operational energy calculation unless it results in different envelope performance, which the question states is identical. Availability of fresh water affects water strategy decisions and water consumption, not energy intensity. Therefore, the difference most directly responsible for differing energy intensities in EDGE for identical hotels in different cities is climate.
NEW QUESTION # 89
A hotel achieved EDGE Certification a year ago. The EDGE Client wishes to maintain its EDGE Certification. What is required to maintain the EDGE Certification of the hotel?
Answer: A
Explanation:
According to the CBCI EDGE certification framework, EDGE Certification is awarded based on verified design and as-built performance at the time of project completion. Once a project has successfully passed the design audit and site audit, and certification is issued, there is no requirement for periodic renewal or ongoing recertification to maintain the status.
EDGE differs from operational performance rating systems that require annual reporting or periodic reassessment. The EDGE system confirms compliance at the point of certification by verifying that the energy, water, and materials efficiency measures modeled in the software have been properly implemented.
After certification, the certificate remains valid without mandatory annual self-assessments, recurring site visits, or scheduled third-party re-verification.
If substantial renovations or changes are made in the future and the owner seeks certification for those changes, a new certification process may be required. However, to maintain an already awarded EDGE Certification under normal circumstances, no additional actions are required. Therefore, the correct answer is that there are no requirements to maintain EDGE Certification.
NEW QUESTION # 90
......
Our EDGE-Expert practice materials are your best choice for their efficiency in different aspects: first of all, do not need to wait, you can get them immediately if you pay for it and download as your wish. Clear-arranged content is our second advantage. Some exam candidates are prone to get anxious about the EDGE-Expert Exam Questions, but with clear and points of necessary questions within our EDGE-Expert study guide, you can master them effectively in limited time.
New EDGE-Expert Test Answers: https://www.examstorrent.com/EDGE-Expert-exam-dumps-torrent.html
P.S. Free & New EDGE-Expert dumps are available on Google Drive shared by ExamsTorrent: https://drive.google.com/open?id=1zRQKMWFSuhYs7dBJ6ybeh7WfS488r-dD