As is known to us, it must be of great importance for you to keep pace with the times. If you have difficulty in gaining the latest information when you are preparing for the F5CAB5, it will be not easy for you to pass the exam and get the related certification in a short time. However, if you choose the F5CAB5 exam reference guide from our company, we are willing to help you solve your problem. There are a lot of IT experts in our company, and they are responsible to update the contents every day. If you decide to buy our F5CAB5 study question, we can promise that we will send you the latest information every day.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> F5CAB5 Reliable Test Question <<
Our F5CAB5 exam questions are compiled by experts and approved by the professionals with years of experiences. They are revised and updated according to the change of the syllabus and the latest development situation in the theory and practice. The language is easy to be understood which makes any learners have no obstacles and our F5CAB5 Guide Torrent is suitable for anyone. The content is easy to be mastered and has simplified the important information. Our F5CAB5 test torrents convey more important information with less questions and answers and thus make the learning relaxing and efficient.
NEW QUESTION # 32
A BIG-IP Administrator uses backend servers to host multiple services per server. There are multiple virtual servers and pools defined, referencing the same backend servers. Which load balancing algorithm is most appropriate to have an equal number of connections on each backend server?17
Answer: B
Explanation:
Comprehensive and Detailed Explanation From BIG-IP Administration Support and Troubleshooting documents: When load balancing is not working as 23expected and connections appear skewed across physical hardware, the administrator must distinguish between "member"24 and "node" level balancing. A
"member" refers to a specific IP and Port combination (e.g., 10.1.1.1:80), whereas a "node" refers to the underlying IP address (10.1.1.1) regardless of the port25. If a single server hosts multiple services (Web, FTP, API) across different pools, using "Least Connections (member)" would only balance connections within each individual pool26. This could lead to a scenario where one server is overwhelmed because it is winning the
"least connections" count in three different pools simultaneously. By selecting "Least Connections (node)," the BIG-IP tracks the total number of concurrent connections to the physical IP address across all pools it belongs to27. This ensures that the administrator can maintain an equal distribution of work across the hardware, preventing performance degradation on backend servers that host multiple application services.
NEW QUESTION # 33
Which menu should you use on the BIG-IP Configuration Utility to generate a QKView support file? (Choose one answer)
Answer: D
Explanation:
AQKViewfile is the primary diagnostic support bundle used by F5 Support to troubleshoot BIG-IP system issues. It contains comprehensive system information, including running configuration, licensing details, module provisioning, hardware status, software versions, log files, statistics, and the output of numerous diagnostic commands. Generating a QKView is a standard and recommended first step when investigating performance problems, configuration issues, or when opening a support case with F5.
In the BIG-IP Configuration Utility (GUI), the correct and supported location to generate a QKView isSystem > Support. This menu is specifically designed for support and troubleshooting operations. From this section, administrators can generate a QKView file, monitor its creation progress, download it locally, or upload it directly to F5 iHealth for automated analysis. This workflow is clearly documented in BIG-IP Administration and Support guides and aligns with F5 best practices.
NEW QUESTION # 34
Refer to the exhibit.
The image shows the status of a virtual server namedapplication_vsin the BIG-IP Configuration Utility.
What is the cause of the status shown? (Choose two answers)
Answer: B,C
Explanation:
The exhibit shows the virtual serverapplication_vswith a status indicating it isoffline but enabled. In BIG-IP terminology, this status means the virtual server itself is administratively enabled, but it is unable to pass traffic becauseno usable pool members are available.
Two common and documented causes for this condition are:
Pool member(s) administratively disabled (Option A):When all pool members are administratively disabled, BIG-IP removes them from load-balancing decisions. Even though the virtual server remains enabled, it has no available pool members to send traffic to, resulting in an offline status.
Node(s) administratively disabled (Option C):Pool members inherit the status of their parent nodes. If a node is administratively disabled, all associated pool members are also marked unavailable. This condition causes the virtual server to show as offline, even though the virtual server configuration itself is correct.
The other options are incorrect:
Forced offline pool members (Option B)result in a different operational intent and are explicitly set for maintenance scenarios.
Virtual server administratively disabled (Option D)would show the virtual server as disabled, not enabled/offline.
This behavior is consistent with BIG-IP traffic management logic and is commonly verified by reviewingpool and node availability stateswhen diagnosing virtual server availability issues.
NEW QUESTION # 35
Pool /Common/testpool member /Common/10.120.0.5:8090 monitor status down. [ /Common/http: up,
/Common/http2: down; last error: ] [ was up for lhr:0min:43sec ]
Why is this pool member being marked down?
Answer: B
Explanation:
This log entry indicates that multiple monitors are assigned to the pool member, and the member is failing one of them.
* Understanding Monitor Logic: By default, if multiple monitors are assigned to a pool or pool member without a "Minimum To Up" (Availability Requirement) setting, the system requires all monitors to pass for the member to be marked "Up".
* Analyzing the Log: The log clearly states: [ /Common/http: up, /Common/http2: down; ... ]. This means the standard HTTP monitor is successful, indicating the member is serving HTTP traffic, but the
http2 monitor has failed.
* Conclusion: Since the http monitor is "up" but the member as a whole is "down," we can conclude the member is successfully responding to standard HTTP requests but not HTTP2 requests. Therefore, the member is currently only serving standard HTTP traffic.
NEW QUESTION # 36
Clients report that they cannot reach the virtual server vs-production on port 80, but are able to ping the virtual server address. The configuration is shown below:
Plaintext
ltm virtual vs-production {
destination 10.99.20.50:http
ip-protocol tcp
mask 255.255.255.255
profiles {
http {}
tcp {}
}
source 192.168.0.0/16
translate-address enabled
translate-port enabled
vlans {
external
}
vlans-enabled
}
What is the cause?
Answer: B
Explanation:
The issue is caused by the Source Address restriction configured on the virtual server.
* Source Filter: The configuration contains the line source 192.168.0.0/16. This acts as an implicit Access Control List (ACL). The virtual server will only accept and process TCP connections if the client's source IP address falls within the 192.168.x.x range.
* Why Ping Works: ICMP (Ping) is handled by the Virtual Address object, not the Virtual Server object. Unless ICMP is specifically disabled on the Virtual Address, it will respond to pings from any subnet, even if the Virtual Server itself is restricted by a source filter or is even disabled.
* Evaluation of Other Options:
* Disabled (Option A): If the VS were disabled, the configuration would typically show disabled or state down, and the symptoms would be similar, but the source filter is a more specific
"misconfiguration" in this context.
* Port 80 (Option C): The configuration destination 10.99.20.50:http explicitly confirms it is listening on port 80.
* Unallowed Subnet: If a client from a different network (e.g., 10.10.1.5) tries to connect, the BIG- IP will silently drop the connection or send a reset because it does not match the defined source criteria.
NEW QUESTION # 37
......
By propagating all necessary points of knowledge available for you, our F5CAB5 practice materials helped over 98 percent of former exam candidates gained successful outcomes as a result. Our F5CAB5 practice materials have accuracy rate in proximity to 98 and over percent for your reference. Up to now we classify them as three versions. They are pdf, software and the most convenient one app. Each of them has their respective feature and advantage including new information that you need to know to pass the test.
Valid Test F5CAB5 Experience: https://www.test4sure.com/F5CAB5-pass4sure-vce.html