All-in-One Exam Guide Practice To your VNX301 Exam. To meet this objective Itcertmaster is offering valid, updated, and real VNX301 exam practice test questions in their formats.. Download VNX301 study guide pdf, pass Versa Certified SD-WAN Specialist (VNX300) exam with full refund guarantee! Success Versa Networks exam with VNX301 Exam Questions which has high pass rate. Use free VNX301 certification questions to gain a good test result.
| Certification Vendor: | Versa Networks |
|---|---|
| Exam Name: | Versa Certified Administrator - SD-WAN Specialist (VNX301) |
| Exam Number: | VNX301 |
| Related Certifications: | Versa Certified SD-WAN Associate (VNX100) |
| Real Exam Qty: | Approx. 47 |
| Available Languages: | English |
| Exam Format: | Scenario-based questions, Multiple-choice |
| Recommended Training: | Versa SD-WAN Configuration and Administration (V-SDCA) Versa Advanced Services (V-ASERV) |
| Exam Registration: | Versa Certification Official Page |
| Sample Questions: | Versa Networks VNX301 Sample Questions |
| Exam Way: | Online proctored or authorized testing center |
| Pre Condition: | Recommended: Versa Certified SD-WAN Associate (VNX100) or equivalent SD-WAN experience |
| Official Syllabus URL: | https://academy.versa-networks.com/certification-vnx300/ |
>> VNX301 Reliable Exam Braindumps <<
Don't waste further time and money, get real Versa Certified SD-WAN Specialist (VNX300) (VNX301) pdf questions and practice test software, and start Versa Certified SD-WAN Specialist (VNX300) (VNX301) test preparation today. Itcertmaster will also provide you with up to 1 year of free Versa Certified SD-WAN Specialist (VNX300) exam questions updates.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 28
A customer wants all voice sessions pinned to the DNS-resolved SaaS path selected at session creation, so the sessions are not moved mid-flow when the SaaS monitoring score changes. Which forwarding-profile behavior is most relevant?
Answer: C
Explanation:
The correct answer is A . In Versa SD-WAN application steering, SaaS or cloud-path selection can use monitoring and DNS-based behavior to determine the best path for an application. For real-time applications such as voice, session stability is often more important than aggressively moving active flows after every path- score change. Session pinning to DNS path is the forwarding-profile behavior that keeps a session associated with the path selected when the DNS/application path decision was made.
This matters because voice and collaboration applications can be sensitive to path changes, packet reordering, and jitter. Pinning prevents active sessions from being unnecessarily moved mid-flow as SaaS monitoring scores change, while still allowing new sessions to take advantage of newer path decisions.
Packet striping is used to distribute packets across multiple circuits and can create reordering concerns for some applications. Symmetric forwarding controls reverse-path behavior rather than DNS-based session stability. Random packet drop is a DoS mitigation action, not a SaaS path-selection feature.
Therefore, the best answer is Session pinning to DNS path.
NEW QUESTION # 29
A branch device is powered on with factory-default staging configuration. The device establishes an IKE session to the staging server and receives an IP address, but it does not proceed to establish an IKE session with the Versa Controller. Which staging phase is failing?
Answer: C
Explanation:
The correct answer is B . In Versa SD-WAN onboarding, the branch progresses through three staging phases.
In Stage 1 , the branch uses its factory-default configuration to start an IKE session with the staging server.
After the IKE session comes up, the staging server assigns an IP address to the branch and notifies the branch of the Versa Director IP address. Versa Director is also notified that the branch has come up.
In Stage 2 , Versa Director pushes the stage-two configuration to the branch through the staging server. This stage changes the IPsec profile so that the Controller IP address becomes the remote IP. The branch reboots and then attempts to establish the IKE session with the Controller. If the device successfully completed Stage
1 but never forms the Controller IKE session, the failure point is Stage 2.
Stage 3 is later, when the device receives stage-three configuration, becomes operational, and creates Controller IPsec plus branch-to-branch VXLAN/ESP sessions. Therefore, the described issue is a Stage
2 staging failure.
NEW QUESTION # 30
Examine the exhibit below.
Which two statements correctly explain the routing shown in the exhibit. (Choose two.)
Answer: B,C
Explanation:
The correct answers are A and C . The route table shown in the Versa SD-WAN design documentation includes a default route, 0.0.0.0/0 , with next hop 169.254.0.2 and exit interface tvi-0/603.0 . A default route is used when no more specific route exists in the routing table, so any unknown IPv4 unicast destination will follow that active default route through the tvi-0/603 interface. This directly supports option C.
The same design context describes local or central internet breakout, where Director workflows create TVI- based connectivity for breakout or gateway-style forwarding. In Versa SD-WAN, TVI interfaces are commonly used as internal virtual tunnel interfaces between routing instances, such as between a tenant LAN VR and a transport or breakout VR. The documentation also describes virtual TVI interface pairs being created by Director workflows between VRs for gateway routing use cases. Therefore, option A is also correct: tvi-0/603 is paired with another interface in another VR to support the default-route forwarding path.
The IP address is not shown as misconfigured; 169.254.x.x addressing is commonly used for point-to- point internal TVI links. The route is also not a blackhole route, because it has an active next hop and an exit interface.
NEW QUESTION # 31
An SD-WAN branch is deployed behind a NAT device. In the VSM local-tunnel-site output, which field or flag indicates that a WAN link is behind NAT?
Answer: B
Explanation:
The correct answer is A . Versa SD-WAN data-path troubleshooting documentation shows the VSM local- tunnel-site output and includes a legend in which BN means Behind NAT . In the WAN local link details, the output also displays a field named WAN lcl link behind NAT , with values such as 1 or 0, and link flags including [ BN CT PT SLA-P ] when the WAN link is behind NAT.
This information is important because NAT status affects how SD-WAN tunnel endpoints are discovered and how public and private transport addresses are represented. The same output includes both public and private WAN link addresses, making it useful for troubleshooting sites behind NAT, stale tunnel endpoints, or incorrect public-address learning.
WAN lcl vrf-id identifies the local transport routing instance ID, not NAT status. Tenant ID identifies the tenant context. Neighbour site type identifies whether the remote endpoint is a Controller, hub, or SD-WAN site. None of those fields specifically confirms whether the local WAN transport is behind NAT.
NEW QUESTION # 32
A branch device is stuck after staging. The Controller does not show the expected branch lifecycle notification. Which statement best describes the role of MP-BGP in the provider organization for this process?
Answer: C
Explanation:
The correct answer is A . Versa branch troubleshooting documentation states that the provider organization should have MP-BGP configured for SD-WAN deployments so that notifications for all relevant branch events are delivered to the Versa Director node. This is significant during onboarding because branch lifecycle events, such as branch-connect and branch-disconnect, help Director determine where the branch is in the staging process and whether the next configuration push should occur.
MP-BGP does not replace IKE or IPsec. The branch still establishes IKE/IPsec to the staging server or Controller depending on the staging phase. MP-BGP also has nothing to do with URL filtering category updates. While BGP can be used in LAN or WAN routing designs, the specific issue described here concerns provider-organization SD-WAN control-plane event delivery.
Therefore, if branch lifecycle events are not appearing properly, validating provider-organization MP- BGP configuration is part of the correct troubleshooting workflow, especially in addition to checking data-path and IPsec connectivity.
NEW QUESTION # 33
......
VNX301 Valid Exam Vce Free: https://www.itcertmaster.com/VNX301.html