JN0-352 Prüfungsguide: Enterprise Routing and Switching, Specialist (JNCIS-ENT) & JN0-352 echter Test & JN0-352 sicherlich-zu-bestehen

Wenn Sie sich an der Juniper JN0-352 Zertifizierungsprüfung beteiligen, wählen Sie doch DeutschPrüfung, was Erfolg bedeutet. Viel glück!

Juniper JN0-352 Exam Syllabus Topics:

SectionObjectives
Protocol-Independent Routing- Load balancing and filter-based forwarding
- Static, aggregate, generated routes
- Martian addresses and RIB groups
Layer 2 Switching and VLANs- Native VLANs and voice VLANs
- Inter-VLAN routing
- Bridging components
- Ports and VLAN tagging
- Frame processing
High Availability- Link Aggregation Groups and RTG
- VRRP, NSR, NSB and BFD
- Virtual chassis and graceful restart
Layer 2 Security- Port security (MAC limiting, DHCP snooping, DAI, IP source guard)
- BPDU, loop and root protection
- MACsec and storm control
- Layer 2 firewall filters
Spanning Tree- Convergence and reconvergence
- STP and RSTP concepts, roles and states
- Bridge Protocol Data Units (BPDUs)
Tunnels- GRE and IP-IP configuration and troubleshooting
- IP tunneling concepts
OSPF- Router ID, adjacencies and neighbors
- Link-state database and packet types
- Areas and LSA types
BGP- EBGP and IBGP peer interactions
- BGP basic operations and message types
- Attributes and path selection
IS-IS- Adjacencies and troubleshooting
- Levels, areas and metrics
- Link-state database and PDUs

>> JN0-352 Prüfungsinformationen <<

JN0-352 Übungsmaterialien & JN0-352 Lernführung: Enterprise Routing and Switching, Specialist (JNCIS-ENT) & JN0-352 Lernguide

Wir DeutschPrüfung bieten seit langem die entsprechenden Juniper JN0-352 Prüfungsunterlagen. Das ist eine Website, die von vielen Kadidaten übergeprüft. Es kann Ihnen die besten Dumps bieten. Wir DeutschPrüfung garantieren Ihre Interesse und sind von allen gut bewertet. Wir DeutschPrüfung sind auch Ihre zuverlässige Website auf heutigem Markt.

Juniper Enterprise Routing and Switching, Specialist (JNCIS-ENT) JN0-352 Prüfungsfragen mit Lösungen (Q186-Q191):

186. Frage
Which statement describes how Rapid Spanning Tree Protocol (RSTP) identifies an alternate port?

Antwort: B

Begründung:
RSTP, as defined in IEEE 802.1w, introduces explicit, well-defined port roles that go beyond legacy 802.1D STP's simpler root/designated/blocking model, and the alternate port role is one of RSTP's key refinements.
An alternate port is a port that receives BPDUs from a bridge other than the one through which the local switch's actual root port reaches the root bridge - in other words, it represents a second, redundant path toward the root bridge learned from a different upstream bridge than the one currently providing the best (root port) path. Because the existing root port already provides the lowest-cost, actively used path to the root, the alternate port is deliberately held in the discarding (non-forwarding) state during normal, stable operation, functioning purely as a pre-computed, ready-to-use backup; critically, RSTP's major performance advantage over legacy STP is that if the current root port fails, the switch can transition its alternate port directly and almost instantly into the forwarding root port role without needing to pass through the lengthy listening and learning timer-based states that classic STP required, since the alternate port's suitability as a backup was already continuously verified through ongoing BPDU reception. It is not simply 'not receiving BPDUs' (an alternate port receives BPDUs continuously, just inferior ones relative to the current root port), it is not itself the least-cost path (that describes the root port), and it does not forward based on designated-port overload, which is not a concept that exists in RSTP's port-role logic at all. Reference topics: Junos Enterprise Switching - Spanning Tree Protocols, RSTP Port Roles: Alternate and Backup Ports.


187. Frage
Refer to Exhibit:

You have applied a firewall filter as an ingress filter on the ge-0/0/0 interface of your Juniper Networks EX Series Switch as shown in the exhibit. An external host sends an ICMP ping packet to the router.
Which statement is correct about how this packet is processed?

Antwort: C

Begründung:
Junos firewall filters evaluate terms sequentially from top to bottom, and a term is only terminal for a packet if its then clause contains an explicit terminating action such as accept, discard, reject, or next term without a match. The count and log actions used in track-icmp are non- terminating; they update statistics and generate a log entry but do not stop evaluation, so a matching ICMP packet falls through to the next term after being counted. The second term, allow- tcp-established, matches only TCP packets carrying the ACK or RST flags as defined by the tcp- established keyword; an ICMP echo request does not satisfy protocol tcp, so this term is skipped entirely and does not accept the packet. Evaluation therefore reaches the implicit catch-all term block-rest, which has no from conditions and matches every remaining packet, incrementing blocked-counter and discarding it. The net effect for the described ICMP ping is that icmp-counter is incremented by the first term, the packet is neither accepted nor rejected by the second term, and blocked-counter is incremented immediately before the packet is silently discarded by the final term. This layered-term behavior, where counting is independent of the accept/discard decision, is a frequently tested nuance of Junos firewall filter processing logic.


188. Frage
A Juniper Networks EX Series Switch has storm control enabled on all interfaces. The ge-0/0/1 interface carrying several VLANs hits its storm control limit and is shut down. In this scenario, which command allows you to manually clear the violation?

Antwort: B

Begründung:
When storm control on an EX Series switch is configured with an action of interface-shutdown (rather than the default of simply dropping excess traffic), exceeding the configured bandwidth threshold for broadcast, multicast, or unknown-unicast traffic causes Junos to administratively disable the offending interface to protect the rest of the switching fabric. Recovery from this condition can happen automatically if a recovery-timeout interval has been configured, but when immediate manual recovery is required, the operational command clear ethernet-switching recovery-timeout interface interface-name explicitly clears the storm-control-triggered violation and re-enables the port without waiting for the timer to expire. This command is purpose-built for this exact condition and is distinct from more general troubleshooting commands: clear ethernet- switching table purges the learned MAC address database and has no bearing on a storm- control-disabled port; clear interface statistics resets traffic counters for diagnostic baselining but does not touch administrative state; and clear log messages simply flushes the local system log buffer. Administrators should also verify the underlying cause of the storm -- a switching loop, a misbehaving host, or a misconfigured device -- before manually clearing the condition, since without addressing the root cause the port is likely to trip again. This command and workflow are commonly tested as part of the Layer 2 security and resiliency features on EX platforms.


189. Frage
Which two statements are correct about IS-IS? (Choose two.)

Antwort: C,D


190. Frage
Which two statements about redundant trunk groups on EX Series switches are correct? (Choose two.)

Antwort: C,D

Begründung:
Redundant trunk groups are designed to provide link redundancy. If the primary link fails, the secondary link will automatically take over to ensure continued connectivity.
In redundant trunk groups, while regular data traffic is sent over the primary link, Layer 2 control traffic (such as STP, LACP, etc.) is allowed on the secondary link to maintain network stability and protocol operations.
https://www.juniper.net/documentation/us/en/software/junos/multicast-l2/topics/topic-map/redundant-trunk-groups.html


191. Frage
......

Es ist nicht so einfach, die JN0-352 Prüfung zu bestehen. JN0-352 Prüfung erfordert ein hohes Maß an Fachwissen der IT. Wenn es Ihnen dieses Wissen fehlt, kann DeutschPrüfung Ihnen die Kenntnissequellen zur Verfügung stehen. Mit ihren reichen Fachkenntnissen und Erfahrungen bietet der Expertenteam die relevanten Fragen und Antworten der JN0-352 Zertifizierungsprüfung. Wenn Sie DeutschPrüfung wählen, versprechen wir Ihnen nicht nur eine 100%-Pass-Garantie, sondern stellt Ihnen auch einen einjährigen kostenlosen Update-Service zur verfügung. Falls Sie in der Prüfung durchfallen, zahlen wir Ihnen die gesammte Summe zurück.

JN0-352 Fragenpool: https://www.deutschpruefung.com/JN0-352-deutsch-pruefungsfragen.html