One of the top features of Fortinet NSEI_OTS_AR-7.6 exam dumps is the NSEI_OTS_AR-7.6 exam passing a money-back guarantee. In other words, your investments with Actual4Dumps Links to an external site. Fortinet Fortinet NSE I - OT Security 7.6 Architect exam questions are secured with the 100 Fortinet NSE I - OT Security 7.6 Architect NSEI_OTS_AR-7.6 Exam passing a money-back guarantee. Due to any reason, if you did not succeed in the final NSEI_OTS_AR-7.6 exam despite using Actual4Dumps NSEI_OTS_AR-7.6 pdf questions and practice tests, we will return your whole payment without any deduction.
| Section | Weight | Objectives |
|---|---|---|
| Monitoring and Risk Assessment | 25% | - OT-focused risk assessment and management - Threat detection using FortiSIEM 7.4 - Event handling and logging with FortiAnalyzer 7.6 |
| Asset Management | 25% | - Device detection and inventory using FortiGate & FortiNAC - OT security standards and compliance (IEC 62443, NIST) - Fortinet Security Fabric for OT environments |
| Network Security | 25% | - Security automation and threat response - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Virtual patching for legacy OT systems |
| Network Access Control | 25% | - OT Ethernet and industrial communication models - Purdue Model and secure network segmentation - Authentication and access policies for OT devices |
>> Real NSEI_OTS_AR-7.6 Dumps <<
Fortinet NSEI_OTS_AR-7.6 is a difficult subject which is hard to pass, but you do not worry too much. If you take right action, passing exam easily is not also impossible. Do you know which method is available and valid? Yes, it couldn't be better if you purchasing NSEI_OTS_AR-7.6 Training Kit. We help many candidates who are determined to get IT certifications. Our good NSEI_OTS_AR-7.6 training kit quality and after-sales service, the vast number of users has been very well received.
NEW QUESTION # 26
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in a firewall policy, which two statements are correct? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are A and C .
Option C is correct because the profile clearly contains the Operational Technology category and specific OT application signatures such as Modbus and IEC.60870.5.104 . The study guide says "You can use application control signatures to detect OT protocols" and "You can filter to a specific OT protocol." That means OT application signatures are active in this sensor profile.
Option A is correct because the guide explains that application control works at different levels: "Detection of protocol (one detection per session)" and "Message level (one detection per protocol message)." It also says you can use application signatures for "granular message type identification." In the exhibit, IEC.
60870.5.104.Control.Functions is explicitly configured, which is a granular IEC message/control-level signature rather than only a protocol-level match. That means logging and control can occur at the IEC command level.
Option B is not correct because the profile shows Modbus configured at the parent protocol level as Monitor
, while the guide states that the "parent signature takes precedence over the child signature." Since protocol-level detection is one detection per session , that does not mean FortiGate will necessarily log each Modbus command individually.
Option D is incorrect because even though the broader Operational Technology category is set to block, the profile includes specific application and filter overrides for Modbus and IEC 104 behavior. So the resulting effect is not simply that all OT protocols are blocked .
NEW QUESTION # 27
Refer to the exhibit.
A Logical Topology page of a FortiGate device is shown. Your OT company wants to gain visibility into the network. You decide to implement device detection with the Security Fabric. Based on the exhibit, which statement is correct? (Choose one answer)
Answer: A
Explanation:
The correct answer is A. Device Detection is enabled on the other identified device .
The study guide explains that device identification is a "useful feature for the Security Fabric topology view" and that "FortiGate detects most third-party devices in your network and adds them to the topology view of the Security Fabric." It also states that in the interfaces section, you can enable device detection , and this detection is what allows FortiGate to identify devices based on observed traffic.
In the exhibit, the tooltip distinguishes between "1 device requires authorization" and "1 other identified device." That means the unauthorized device is a separate FortiGate/Fabric member issue, while the other identified device is simply a detected third-party device shown in the topology because device detection is working. Therefore, the correct interpretation is that device detection is enabled for that identified device.
Option B is incorrect because the exhibit does not say the other identified device requires authorization.
Option C is not supported by the study guide, and option D is too specific because no evidence in the exhibit confirms that the detection was enabled specifically on port3 .
NEW QUESTION # 28
You want to improve access control for your large OT network using passive authentication. What must you configure on FortiGate? (Choose one answer)
Answer: D
Explanation:
The correct answer is A. Fortinet Single-Sign On (FSSO) . The study guide states under Active and Passive Authentication that for passive authentication, "User does not receive a login prompt from FortiGate" ,
"Credentials are determined automatically" , and specifically "FSSO, RSSO, and NTLM can be used." It then explains that passive authentication occurs with the single sign-on method and explicitly identifies Fortinet SSO (FSSO) as one of those methods.
The guide also says: "For passive authentication, you can implement FSSO. FSSO allows users who have already authenticated on the network through another system to be transparently identified. After initial login to any system on the network, users can access allowed resources without being prompted for credentials." That is exactly what the question asks for: improving access control in a large OT network using passive authentication .
The other options do not match passive authentication. Local users are part of local authentication, two- factor authentication adds an extra security factor but still uses active authentication, and FortiAuthenticator as a remote server supports centralized authentication for mid-to-large networks, but by itself it is not the specific passive-authentication method being asked here. The study guide is explicit that the FortiGate configuration for passive authentication is FSSO .
NEW QUESTION # 29
Refer to the exhibit.
A Run_report task is shown. You want to automate the generation of a newly created report on FortiAnalyzer . When you configure the Run_report task in Playbook, why is the report not shown in the Report field? (Choose two answers)
Answer: A,E
Explanation:
Based on the architecture of FortiAnalyzer within the Security Fabric and its automation capabilities:
* Automation Stitch and Reports : Within the Security Fabric environment, FortiAnalyzer serves as a key element in creating automation stitches and playbooks. For a report to be selectable within a Playbook task (such as the Run_report task shown in the exhibit), it must meet specific technical prerequisites in the report configuration.
* Auto-cache Requirement (Answer C) : For a report to be used for automated generation, it must be " ready " to be processed by the engine without manual intervention. Auto-cache must be enabled in the report settings to ensure the report can be generated dynamically and efficiently when triggered by the playbook.
* Extended Log Filtering (Answer B) : Playbooks often pass specific variables from the trigger (such as a specific device IP or a time range) into the report. For the report to accept these dynamic parameters and be visible as an " automation-compatible " report in the Playbook interface, Extended Log Filtering must be enabled.
* Workflow Constraints : Without these two settings enabled on the report itself, the Playbook engine cannot guarantee the report ' s successful generation or parameter injection, and thus filters it out of the available selection list in the Run_report task.
NEW QUESTION # 30
Refer to the exhibits.
A partial Incident Analysis page and the log details related to the event are shown. An attack is reported on your OT network. You analyze the corresponding incident. Based on the information provided on the Incident Analysis page and the log details, which two statements are correct? (Choose two answers)
Answer: A,D
Explanation:
Based on the technical data provided in the exhibits and the OT Security 7.6 Architect curriculum:
* Industrial Protocol Identification (Statement A) : The log details exhibit clearly shows that the Destination Port used in the attack is 502 . According to the study guide ' s section on Industrial Protocol Protection , the standard port used by the Modbus TCP protocol is 502 . Furthermore, the attack name identifies a " Triangle.Research.Nano-10.PLC, " which are industrial controllers commonly utilizing Modbus for communications.
* Attack Mitigation (Statement B) : The log details specify that the Action taken by the FortiGate (Edge-FortiGate) was dropped . In cybersecurity and Fortinet fabric operations, dropping a packet associated with an IPS signature means the traffic was blocked from reaching its target, thereby mitigating the attack.
* Target IP Address (Statement E) : The log detail explicitly lists the Destination IP as 192.168.2.3 .
The Incident Analysis page also titles the incident with dstip:192.168.2.3. While the " Affected Endpoint " is shown as 10.1.5.20 , in an " outgoing " attack direction (as shown in the log), this likely refers to the internal source/attacker IP, whereas the target is the destination IP (192.168.2.3). Thus, Statement E is incorrect.
* Protocol Conflict (Statement C) : The IEC 104 protocol typically utilizes port 2404 . Since the log specifies port 502, Statement C is incorrect.
* Severity Distinction (Statement D) : While the Incident severity is marked as High , the question specifically asks about event severity. The " Events " table at the bottom of the Incident Analysis page shows a " User login/logout failed " event with a medium severity. Because there is a distinction in the management console between the severity of individual events and the aggregated incident, and Statement A and B are technically definitive based on port and action, A and B are the correct architectural choices.
NEW QUESTION # 31
......
It is convenient for the user to read. The NSEI_OTS_AR-7.6 test materials have a biggest advantage that is different from some online learning platform which has using terminal number limitation, the NSEI_OTS_AR-7.6 quiz torrent can meet the client to log in to learn more, at the same time, the user can be conducted on multiple computers online learning, greatly reducing the time, and people can use the machine online of NSEI_OTS_AR-7.6 Test Prep more conveniently at the same time. As far as concerned, the online mode for mobile phone clients has the same function.
Reliable NSEI_OTS_AR-7.6 Exam Simulator: https://www.actual4dumps.com/NSEI_OTS_AR-7.6-study-material.html