JN0-364 Test Questions Fee - JN0-364 Online Training Materials

2026 Latest Pass4Test JN0-364 PDF Dumps and JN0-364 Exam Engine Free Share: https://drive.google.com/open?id=1GHVrCsvwMOMfekEbzJymcXLIuy3-MP0K

Might it be said that you are enthused about drifting through the Service Provider Routing and Switching, Specialist (JNCIS-SP) on the chief endeavor? Then, you are at the ideal locale for Juniper JN0-364 exam. Juniper JN0-364 Dumps gives you the most recent review material that has been figured out for you to pass the Juniper JN0-364 on the key endeavor. Pass4Test is moving these days and is essential to finding a tremendous compensation calling. Different promising beginners stand around inactively and cash due to including an invalid prep material for the Juniper JN0-364 exam.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
Topic 1: Intermediate System to Intermediate System (IS-IS)- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
  • 1. Troubleshooting tools
  • 2. Interfaces and adjacencies
  • 3. Routing policy application
- Identify the concepts, operation, or functionality of IS-IS
  • 1. Levels and areas
  • 2. Designated intermediate system (DIS)
  • 3. Adjacencies and neighbors
  • 4. Link-state database
  • 5. Metrics
  • 6. Type, length, values (TLVs)
  • 7. IS-IS protocol data units (PDUs)
Topic 2: Open Shortest Path First (OSPF)- Identify the concepts, operation, or functionality of OSPF
  • 1. OSPF area and router types
  • 2. Designated router and backup designated router
  • 3. Router ID
  • 4. Link-state advertisement (LSA) packet type
  • 5. OSPF packet types
  • 6. Adjacencies and neighbors
  • 7. Link-state database
- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
  • 1. Interfaces and neighbor
  • 2. Troubleshooting tools
  • 3. Routing policy application
Topic 3: Spanning Tree Protocols- Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
  • 1. STP
  • 2. MSTP
  • 3. VSTP
  • 4. RSTP
- Identify the concepts, operation, or functionality of STP
  • 1. STP
  • 2. MSTP
  • 3. VSTP
  • 4. RSTP
Topic 4: Multiprotocol Label Switching (MPLS)- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
  • 1. RSVP-signaled Label-Switched Paths (LSPs)
  • 2. Shortest path segment-routing LSPs
  • 3. MPLS forwarding
  • 4. LDP-signaled Label-Switched Paths (LSPs)
- Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices
  • 1. End-to-end packet flow and forwarding
  • 2. MPLS packet header
  • 3. Segment routing with MPLS
  • 4. Labels and the label information base
  • 5. MPLS and routing tables
  • 6. RSVP
  • 7. LDP
  • 8. MPLS terminology
Topic 5: Layer 2 Bridging or VLANs- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
  • 1. Provider bridging
  • 2. IRB
  • 3. Interfaces and ports
  • 4. VLANs
- Identify the concepts, benefits, or functionality of VLANs
  • 1. Port modes
  • 2. Tagging
  • 3. Integrated Routing and Bridging (IRB)
- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
  • 1. Provider bridging (Q-in-Q tunneling)
  • 2. Frame processing
  • 3. Bridging elements and terminology
  • 4. Virtual Switches
  • 5. Service provider switching platforms
Topic 6: Border Gateway Protocol (BGP)- Identify the concepts, operation, or functionality of BGP
  • 1. IBGP and EBGP functionality and interaction
  • 2. BGP message types
  • 3. BGP route reflection and confederations
  • 4. Attributes
  • 5. Route selection process
  • 6. BGP basic operation
- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
  • 1. Troubleshooting tools
  • 2. Peers and peer groups
  • 3. Routing policy application
Topic 7: IPv6- Identify the concepts, operation, or functionality of IPv6
  • 1. IPv6 over IPv4 tunneling
  • 2. Dynamic routing - OSPFv3, IS-IS, BGP
  • 3. Static routes
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
Topic 8: Protocol-Independent Routing- Identify the concepts, operation, or functionality of various protocol-independent routing components
  • 1. Martian addresses
  • 2. Load balancing
  • 3. Routing instances, including routing information base (RIB) (also known as routing table) group
  • 4. Static, aggregate, and generated routes
  • 5. Filter-based forwarding
- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
  • 1. Load balancing
  • 2. Static, aggregate, and generated routes
  • 3. Filter-based forwarding

>> JN0-364 Test Questions Fee <<

Efficient JN0-364 Test Questions Fee & Leader in Qualification Exams & Marvelous Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP)

Juniper JN0-364 practice exam support team cooperates with users to tie up any issues with the correct equipment. If Service Provider Routing and Switching, Specialist (JNCIS-SP) material changes, CertsFire also issues updates free of charge for three months following the purchase of our Juniper JN0-364 Exam Questions.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q126-Q131):

NEW QUESTION # 126
Which OSPF packet type is used to initiate and maintain neighbor relationships?

Answer: D

Explanation:
Hello packets are used by OSPF routers to discover neighbors and establish adjacency relationships. They are also sent periodically to maintain the neighbor relationship and verify that neighboring routers are still reachable.


NEW QUESTION # 127
You are asked to configure interfaces on Juniper devices to support dual VLAN tags. In this scenario, which two interface statements would accomplish this task? (Choose two.)

Answer: B,D

Explanation:
To supportdual VLAN tagging(often referred to as Q-in-Q or 802.1ad), a Juniper interface must be configured to process more than one 802.1Q header. In Junos OS, this is handled at the physical interface level ([edit interfaces <interface-name>]).
According to Juniper Service Provider documents, two primary configuration statements enable this capability:
* stacked-vlan-tagging (Option D):This is the traditional command used to enable an interface to accept frames with two VLAN tags. When this is enabled, the router expects an outer "service" tag and an inner "customer" tag. This is specifically used in provider edge scenarios where a service provider is tunneling multiple customer VLANs.
* flexible-vlan-tagging (Option A):This is a more modern and versatile command. It allows the interface to support a mix of different encapsulation types across different logical units. For example, with flexible-vlan-tagging, you can have one logical unit (unit 10) doing standard single-tagging and another logical unit (unit 20) doing dual-tagging (vlan-tags outer X inner Y). This is the preferred method on newer hardware (like the MX Series) because it provides the highest level of configuration flexibility.
Vlan-tagging (Option C)only enables the interface to support a single 802.1Q tag, andgigether-options (Option B)contains physical-layer settings like auto-negotiation or flow control, which do not influence VLAN encapsulation. Therefore, A and D are the correct mechanisms for enabling dual-tag support.


NEW QUESTION # 128
What happens if an IS-IS router receives a link-state PDU with a higher sequence number than the one in its database?

Answer: C

Explanation:
When an IS-IS router receives a link-state PDU with a higher sequence number than the version stored in its link-state database, it recognizes the received LSP as newer information. The router updates its own database with this newer LSP and then floods it to its other neighbors to ensure the updated topology information is propagated throughout the network.


NEW QUESTION # 129
A BGP router receives two routes to the same prefix. One route has a higher local preference, while the other has a shorter AS path. In this scenario, which route would be selected?

Answer: B

Explanation:
TheBGP path selection algorithmis a deterministic process used by Juniper routers to select the single "best" path from the BGP table to be placed into the routing table (inet.0). This algorithm follows a specific, hierarchical set of rules. According to Juniper Networks technical documentation, the router evaluates attributes in a fixed order, and once a tie is broken at a specific step, the remaining steps are ignored.
The order of the primary BGP attributes in Junos OS is as follows:
* Highest Local Preference:This is the first attribute evaluated after the basic check for a reachable next hop. Local preference is used within an Autonomous System (AS) to prioritize one exit point over another.
* Shortest AS_PATH:If the local preference is equal, the router then evaluates the length of the AS_PATH attribute.
* Lowest Origin Code:(IGP < EGP < Incomplete).
* Lowest Multi-Exit Discriminator (MED).
In this specific scenario, the router compares a path with ahigher local preferenceagainst a path with a shorter AS path. Because theLocal Preferencecheck occurs at Step 1 and theAS_PATHcheck occurs later at Step 2, the router will select the path with the higher local preference immediately. The length of the AS path becomes irrelevant in this comparison because the tie was already broken by the local preference value.
This allows network administrators to override the default "shortest path" logic of BGP to prefer specific providers or links based on business requirements.


NEW QUESTION # 130
Interface ge-0/0/0.0 connecls yout network to your ISP. You want to advertise this interface address as an Internal route In OSPF without creating a neighbor with your ISP.
In this scenario, how is this task accomplished?

Answer: D

Explanation:
When you want to advertise an interface in OSPF but not form an OSPF adjacency over that interface (for example, towards an ISP), you can configure the interface as passive. This will advertise the network on the interface in OSPF without sending OSPF hello packets or forming OSPF neighbor relationships on that interface.


NEW QUESTION # 131
......

Although it is not an easy thing for some candidates to pass the exam, but our JN0-364 question torrent can help aggressive people to achieve their goals. This is the reason why we need to recognize the importance of getting the test JN0-364 certification.If you have any doubt about our products that will bring a lot of benefits for you. The trial demo of our JN0-364 question torrent must be a good choice for you. By the trial demo provided by our company, you will have the opportunity to closely contact with our JN0-364 exam torrent, and it will be possible for you to have a view of our products.

JN0-364 Online Training Materials: https://www.pass4test.com/JN0-364.html

DOWNLOAD the newest Pass4Test JN0-364 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1GHVrCsvwMOMfekEbzJymcXLIuy3-MP0K