2026 Latest CertkingdomPDF NSE6_OTS_AR-7.6 PDF Dumps and NSE6_OTS_AR-7.6 Exam Engine Free Share: https://drive.google.com/open?id=1dxXNI8SODNSwOOWp-azqHKZ_0liJAUlg
Our specialists check whether the contents of NSE6_OTS_AR-7.6 real exam are updated every day. If there are newer versions, they will be sent to users in time to ensure that users can enjoy the latest resources in the first time. In such a way, our NSE6_OTS_AR-7.6 Guide materials can have such a fast update rate that is taking into account the needs of users. And we will always send our customers with the latest and accurate NSE6_OTS_AR-7.6 exam questions.
| Section | Objectives |
|---|---|
| Topic 1: Network Segmentation and Access Control | - Segmentation strategies for industrial networks
|
| Topic 2: Monitoring, Detection, and Incident Response | - Threat detection in OT environments
|
| Topic 3: OT Security Fundamentals | - Industrial Control Systems (ICS) and SCADA concepts
|
| Topic 4: Deployment and Operational Best Practices | - Securing industrial communication protocols
|
| Topic 5: Fortinet OT Security Architecture | - Fortinet Security Fabric in OT environments
|
>> NSE6_OTS_AR-7.6 New Study Plan <<
When asked about the opinion about the exam, most people may think that it’s not a quite easy thing, and some people even may think that it’s a difficult thing. NSE6_OTS_AR-7.6 learning materials of us include the questions and answers, which will show you the right answers after you finish practicing. NSE6_OTS_AR-7.6 Online Test engine can record the test history and have a performance review, with this function you can have a review of what you have learned.
NEW QUESTION # 90
Which statemenl about the IEC 104 protocol is true?
Answer: C
Explanation:
IEC 104 is a widely used protocol in the field of Supervisory Control and Data Acquisition (SCADA) for electrical engineering applications, specifically telecontrol. It's designed to facilitate communication between control stations and substations in power grids.
NEW QUESTION # 91
Refer to the exhibit.
A partial OT network is shown. You want to configure an automated alert sent by FortiAnalyzer when an attack occurs on a FortiGate device. Which two configurations must you implement? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are A and D. The study guide provides a direct use case called Attack Detection and Automated Alert. It states: "A downstream FortiGate detects an attack and sends logs to FortiAnalyzer. FortiAnalyzer parses the logs and notifies the root FortiGate. The root FortiGate triggers the action, which in this case, is a notification to the administrator." The same slide also explicitly shows "Stitches configured on root FortiGate." This confirms that to send the automated alert, you must configure the automation stitch on the root FortiGate.
The second required configuration is an event handler on FortiAnalyzer. The guide explains that "Event handlers generate events" and that "FortiAnalyzer uses event handlers to filter all incoming logs. If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Since FortiAnalyzer must detect the attack from the received logs before notifying the root FortiGate, an event handler is required on FortiAnalyzer.
Option B is incorrect because the study guide does not identify a LOCALHOST task as the required configuration for this attack-alert flow. Option C is also incorrect because the question asks what must be configured to enable the automated alert workflow. An IPS profile may detect some attacks, but the required automation path in the study guide is specifically event handler on FortiAnalyzer + stitch on the root FortiGate.
NEW QUESTION # 92
Refer to the exhibit.
A firewall policy page is shown. To improve the security of your OT network, you have configured a Supervisor profile in the firewall policies, as shown in the exhibit. However, a supervisor is reporting that he cannot ping PLC-1. What are the two reasons? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are A and C .
Option A is correct because the study guide explains that with active authentication , FortiGate prompts the user only when they use "an acceptable login protocol." It states: "When you use only active authentication, if all possible policies that could match the source IP address have authentication enabled, then the user will receive a login prompt (assuming they use an acceptable login protocol)." A direct ping to PLC-1 uses ICMP , which is not the kind of login protocol used to trigger user authentication.
So the supervisor must first authenticate through a protocol such as HTTPS or Telnet , then the ICMP traffic can match the authenticated policy.
Option C is also correct because the exhibit shows policy ID 8 greyed out, meaning it is not enabled. That policy appears above the Supervisor_access (9) policy and allows broader access to PLC-1 , whereas policy 9 is limited to ALL_ICMP . The study guide explains that "Because the user has not yet authenticated, the user group aspect of the traffic does not match" and FortiGate continues searching for another complete match. In this case, with policy 8 disabled, the supervisor is left with only the ICMP rule, which cannot be used to perform the initial login step needed for active authentication.
Option B is not supported by the exhibit. Option D is incorrect because auth-on-demand always would force authentication prompts more aggressively, but the core problem here is that the user is trying to start with ICMP and the broader policy that could permit the initial authenticated access is disabled.
NEW QUESTION # 93
Refer to the exhibit. An operational technology (OT) network security audit concluded that the application sensor does not block the IEC.60870.5.104_Information.Trasfer.C.BO.NA.1 signature.
Which change must the OT network administrator make?
Answer: D
Explanation:
The current configuration assigns priority 2 to the
IEC.60870.5.104_Information.Transfer.C.BO.NA.1 application signature and sets it to Block.
Priority 1 contains broader IEC.60870.5.104_Information.Transfer entries set to Monitor, which overrides the block action due to higher priority. To ensure that the C.BO.NA.1 signature is blocked, it must have higher priority than the general monitoring rule.
NEW QUESTION # 94
During layer 2 polling, which two pieces of information are gathered by FortiNAC to identify a device? (Choose two.)
Answer: A,C
Explanation:
Layer 2 polling allows FortiNAC to learn where a device appears in the network, such as the switch and port, and when that information was learned. This helps FortiNAC identify and track device presence and location based on Layer 2 network discovery.
NEW QUESTION # 95
......
We at CertkingdomPDF give you the techniques and resources to make sure you get the most out of your exam study. We provide preparation material for the Fortinet NSE 6 - OT Security 7.6 Architect exam that will guide you when you sit to study for it. NSE6_OTS_AR-7.6 updated questions give you enough confidence to sit for the Fortinet exam.If you take enough practice tests on NSE6_OTS_AR-7.6 Practice Exam software by CertkingdomPDF, you’ll be more comfortable when you walk in on Fortinet exam day. So, go with NSE6_OTS_AR-7.6 exam questions that are prepared under the supervision of industry experts to expand your knowledge base and successfully pass the certification exam on the first attempt.
Exam Vce NSE6_OTS_AR-7.6 Free: https://www.certkingdompdf.com/NSE6_OTS_AR-7.6-latest-certkingdom-dumps.html
2026 Latest CertkingdomPDF NSE6_OTS_AR-7.6 PDF Dumps and NSE6_OTS_AR-7.6 Exam Engine Free Share: https://drive.google.com/open?id=1dxXNI8SODNSwOOWp-azqHKZ_0liJAUlg