아무런 노력을 하지 않고 승진이나 연봉인상을 꿈꾸고 있는 분이라면 이 글을 검색해낼수 없었을것입니다. 승진이나 연봉인상을 꿈꾸면 승진과 연봉인상을 시켜주는 회사에 능력을 과시해야 합니다. IT인증시험은 국제적으로 승인해주는 자격증을 취득하는 시험입니다. Pass4Test의Juniper인증 JN0-364덤프의 도움으로 Juniper인증 JN0-364시험을 패스하여 자격증을 취득하면 승진이나 연봉인상의 꿈이 이루어집니다. 결코 꿈은 이루어질것입니다.
| Section | Weight | Objectives |
|---|---|---|
| Spanning Tree Protocols | 8-12% | - STP, RSTP, MSTP, VSTP - BPDU and protection features - Port roles and states - Configuration and convergence |
| Open Shortest Path First (OSPF) | 15-20% | - LSA types and operation - Areas and router types - Link-state database - Configuration and troubleshooting |
| Multiprotocol Label Switching (MPLS) | 12-18% | - Labels and LIB - LDP and RSVP - Segment routing basics - Configuration and monitoring - Terminology and forwarding |
| IPv6 | 8-12% | - OSPFv3 and BGP for IPv6 - Static and dynamic routing - Address types and format - Autoconfiguration |
| Intermediate System to Intermediate System (IS-IS) | 10-15% | - Configuration and monitoring - PDUs and TLVs - Metrics and wide metrics - Adjacencies and levels |
| Protocol-Independent Routing | 10-15% | - Static, aggregate, and generated routes - Filter-based forwarding - Routing instances and RIB groups - Martian addresses - Load balancing |
| Layer 2 Bridging and VLANs | 8-12% | - VLANs and trunking - Bridging concepts - Service provider switching features |
| Tunnels | 5-8% | - Tunnel configuration and usage - GRE and IP-IP tunnels |
| Border Gateway Protocol (BGP) | 20-25% | - Policy and route filtering - Path selection and attributes - Basic operation and message types - IBGP and EBGP - Configuration and troubleshooting |
| High Availability | 5-8% | - NSR and GRES concepts - Nonstop active routing - Graceful restart |
Juniper업계에 종사하시는 분들은 JN0-364인증시험을 통한 자격증취득의 중요성을 알고 계실것입니다. Pass4Test에서 제공해드리는 인증시험대비 고품질 덤프자료는 제일 착한 가격으로 여러분께 다가갑니다. Pass4Test덤프는 JN0-364인증시험에 대비하여 제작된것으로서 높은 적중율을 자랑하고 있습니다.덤프를 구입하시면 일년무료 업데이트서비스, 시험불합격시 덤프비용환불 등 퍼펙트한 서비스도 받을수 있습니다.
질문 # 40
Which two solutions are commonly used to send IPv6 traffic over IPv4 networks? (Choose two.)
정답：B,D
설명：
6to4 is an IPv6 transition mechanism that encapsulates IPv6 packets inside IPv4 packets, allowing IPv6 traffic to traverse an IPv4 network infrastructure.
6over4 is another tunneling mechanism that transports IPv6 packets over an IPv4 network by using IPv4 as the underlying transport, enabling IPv6 communication across IPv4-only networks.
질문 # 41
Referring to the exhibit. You are asked to configure OSPF between routers R1 and R2 using IPv6 addresses. Which two tasks will accomplish your objective? (Choose two.)
정답：B,C
설명：
To configure OSPFv3 (the version of OSPF that supports IPv6), you would use the set protocols ospf3 command with the appropriate area and interface. OSPFv3 requires a 32-bit router ID just like OSPFv2, which is typically an IPv4 address. OSPF does not use a 128-bit router ID, so answer D is incorrect.
질문 # 42
Referring to the exhibit. The routers shown in the exhibit are configured for segment routing.
In this scenario, what is the adjacency SID that Router B advertises to Router A?
정답：D
설명：
The adjacency SID in segment routing is advertised by one router to inform another about the label that should be used to forward traffic to it over a particular link. In this scenario, Router B would advertise an adjacency SID to Router A, which would be used by Router A to forward traffic to Router B. Based on the exhibit, the adjacency SID that Router B advertises to Router A would be 12.
질문 # 43
Which new field is added to an IPv6 header as compared to IPv4?
정답：D
설명：
The IPv6 header includes a new field that is not found in the IPv4 header, called the flow label.
The flow label in IPv6 is used to identify packets that require special handling by routers for quality of service (QoS) or other reasons, allowing these packets to be handled efficiently as they move through the network.
질문 # 44
Which feature allows Junos OS to perform recursive lookups for static route next hops?
정답：C
설명：
In standard routing, astatic routeis typically considered valid only if the specified next-hop IP address is directly reachable on a local subnet. However, in complex service provider designs, the next-hop might be a
"distant" IP address that is reachable through another route (such as a BGP route or another static route). This process of looking up a next-hop within another routing entry is calledrecursive lookup.
In Junos OS, theresolve (Option A)parameter is explicitly used to enable this behavior for static routes.
According to Juniper technical documentation, when you append the resolve keyword to a static route configuration, you are instructing the Routing Engine to search the routing table to find a path to that distant next-hop.
For example:
set routing-options static route 10.1.1.0/24 next-hop 192.168.100.1 resolve If 192.168.100.1 is not on a local interface but is reachable via an OSPF route, the router will "resolve" the path and install the 10.1.1.0/24 route into the forwarding table using the OSPF path's exit interface.
Why other options are incorrect:
* Discard (Option B)andReject (Option C)are "next-hop types" used to drop traffic, either silently (discard) or by sending an ICMP unreachable message (reject).
* Next-table (Option D)is used forInter-VRF routing, where the router is told to look up the destination in a completely different routing instance (like a VRF table), which is a different architectural function than a recursive next-hop lookup within the same table.
질문 # 45
......
Pass4Test는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려져 있습니다. 그리고 여러분에 신뢰를 드리기 위하여 Juniper 인증JN0-364 관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. Pass4Test제품에 대하여 아주 자신이 있습니다. Juniper 인증JN0-364 도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다.
JN0-364덤프: https://www.pass4test.net/JN0-364.html