BONUS!!! Download part of PrepAwayPDF NSEI_OTS_AR-7.6 dumps for free: https://drive.google.com/open?id=143kjsYfZbMsApLsqSg44TCvkU8o500al
Convenience of the online version of our NSEI_OTS_AR-7.6 study materials is mainly reflected in the following aspects: on the one hand, the online version is not limited to any equipment. You are going to find the online version of our NSEI_OTS_AR-7.6 exam prep applies to all electronic equipment, including telephone, computer and so on. On the other hand, if you decide to use the online version of our NSEI_OTS_AR-7.6 Study Materials, you don’t need to worry about no network.
| Section | Objectives |
|---|---|
| Network Security | - Configure virtual patching - Configure automation - Configure security inspections for industrial protocols |
| Network Access Control | - Configure network segmentation schemas - Configure network access authentication - Explain OT Ethernet concepts |
| Asset Management | - Implement device detection on FortiGate and FortiNAC - Explain OT standards and Fortinet compliance - Use Fortinet Security Fabric for an OT network |
| Monitoring and Risk Assessment | - Analyze security reports from FortiAnalyzer - Create FortiAnalyzer event handlers - Perform risk assessment and management |
>> NSEI_OTS_AR-7.6 Test Fee <<
Three Formats of Actual Fortinet NSEI_OTS_AR-7.6 Exam Questions Offered By PrepAwayPDF! Fortinet NSE I - OT Security 7.6 Architect NSEI_OTS_AR-7.6 genuine dumps are designed in the three best formats. The name of these three formats of PrepAwayPDF Fortinet NSEI_OTS_AR-7.6 exam questions is NSEI_OTS_AR-7.6 PDF Questions formats, Web-based and desktop Fortinet NSEI_OTS_AR-7.6 practice exam software. Fortinet NSEI_OTS_AR-7.6 dumps pdf format will help you to immediately prepare for the Fortinet NSEI_OTS_AR-7.6 exam.
NEW QUESTION # 49
Refer to the exhibit.
An automation trigger creation wizard is shown. You want to automate some tasks in your OT network. In a FortiGate device, you create a new automation trigger based on a FortiAnalyzer event handler. When you want to configure the Event handler name field, the event handler created in FortiAnalyzer is not shown.
What are two reasons for this? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are A and B .
Option B is correct because the study guide states that "When a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" to FortiGate. If Automation Stitch is not enabled in the FortiAnalyzer event handler, that handler will not be usable for the FortiGate automation- stitch workflow. The guide also explains that the configuration of each event handler can include
"Automation stitches" and "Rules," showing that this is a required part of the FortiAnalyzer-to-FortiGate automation path.
Option A is also correct. The study guide explains the automation flow in the Security Fabric:
"FortiAnalyzer parses the logs and notifies the root FortiGate" and then "The root FortiGate triggers the action." That means FortiGate must have the FortiAnalyzer connection configured through the Security Fabric side before it can consume FortiAnalyzer event handlers. The warning in the exhibit about configuring a FortiAnalyzer connection also points directly to that requirement.
Option C is incorrect because + Create is not the reason the existing event handler is missing; it is only an interface control. Option D is not the best answer for this item because the question is about why the event handler name list on FortiGate is empty for FortiAnalyzer-triggered automation. The study guide's verified requirements for that workflow are the FortiAnalyzer-to-FortiGate Fabric connection and enabling Automation Stitch on the FortiAnalyzer event handler.
NEW QUESTION # 50
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in a firewall policy, which two statements are correct? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are A and C .
Option C is correct because the profile clearly contains the Operational Technology category and specific OT application signatures such as Modbus and IEC.60870.5.104 . The study guide says "You can use application control signatures to detect OT protocols" and "You can filter to a specific OT protocol." That means OT application signatures are active in this sensor profile.
Option A is correct because the guide explains that application control works at different levels: "Detection of protocol (one detection per session)" and "Message level (one detection per protocol message)." It also says you can use application signatures for "granular message type identification." In the exhibit, IEC.
60870.5.104.Control.Functions is explicitly configured, which is a granular IEC message/control-level signature rather than only a protocol-level match. That means logging and control can occur at the IEC command level.
Option B is not correct because the profile shows Modbus configured at the parent protocol level as Monitor
, while the guide states that the "parent signature takes precedence over the child signature." Since protocol-level detection is one detection per session , that does not mean FortiGate will necessarily log each Modbus command individually.
Option D is incorrect because even though the broader Operational Technology category is set to block, the profile includes specific application and filter overrides for Modbus and IEC 104 behavior. So the resulting effect is not simply that all OT protocols are blocked .
NEW QUESTION # 51
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in firewall policy, which two statements are correct? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are A and C . The study guide explains that "You can use application control signatures to detect OT protocols" and that application control provides "granular message type identification." In the exhibit, the Operational Technology application category is included in the Application Sensor profile, so OT application signatures are enabled in this profile.
Option C is also correct because the override table shows Modbus_Read.Holding.Registers = Allow and Modbus = Block . The study guide states that you can use specific granular application control signatures to allow a specific Modbus command and block all others , and it also shows that application control can identify read and write commands separately at message level. Therefore, Modbus write commands are blocked by this profile.
Option B is incorrect because the profile is not simply monitoring all OT protocols; it contains a Block action for Modbus. Option D is incorrect because the study guide links OT protocol visibility specifically to the monitor status , while in the exhibit Modbus_Read.Holding.Registers is set to Allow , not Monitor .
NEW QUESTION # 52
Refer to the exhibit. A partial OT network is shown. You must improve the security of this OT network and implement internal segmentation between network 1 and network 2. How can you achieve the segmentation?
(Choose one answer)
Answer: D
Explanation:
The correct answer is D. You can configure forward domain IDs for each network . The study guide explains that in FortiGate transparent mode, "all interfaces belong to the same broadcast domain, even interfaces with different VLAN IDs" and then states that you should "use this command to subdivide into multiple broadcast domains" with set forward-domain < domain_ID > . It further explains that
"interfaces with the same domain ID belong to the same broadcast domain" and "traffic arriving on one interface is broadcast only to interfaces in the same forward domain ID." This is exactly the mechanism used to separate one internal network from another and improve segmentation.
The other options do not match this requirement. Universal ZTNA is described as controlling user access to applications , not segmenting two internal OT networks. An explicit software switch is for controlling intra- switch or intra-VLAN traffic inside the same software switch broadcast domain, which is more aligned with microsegmentation than separating two routed internal networks. One traffic VDOM does not create segmentation by itself; segmentation with VDOMs requires multiple VDOMs, not one. Therefore, the best choice for segmenting network 1 and network 2 in this scenario is to assign separate forward domain IDs .
NEW QUESTION # 53
What is the next step if FortiGate cannot detect a device locally? (Choose one answer)
Answer: D
NEW QUESTION # 54
......
PrepAwayPDF has been designing and offering real Fortinet Fortinet NSE I - OT Security 7.6 Architect exam dumps for many years. We regularly update our valid Fortinet NSEI_OTS_AR-7.6 certification test preparation material to keep them in line with the current Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam content and industry standards. Professionals from different countries give us their valuable feedback to refine NSEI_OTS_AR-7.6 actual dumps even more.
Reliable NSEI_OTS_AR-7.6 Real Test: https://www.prepawaypdf.com/Fortinet/NSEI_OTS_AR-7.6-practice-exam-dumps.html
BTW, DOWNLOAD part of PrepAwayPDF NSEI_OTS_AR-7.6 dumps from Cloud Storage: https://drive.google.com/open?id=143kjsYfZbMsApLsqSg44TCvkU8o500al