Are you planning to attempt the Huawei H19-404_V1.0 certification exam and don't know where to study for it and pass it with good marks? DumpsTorrent has designed the HCSE-Presales-Campus Network Planning and Design V1.0 (H19-404_V1.0) Questions, especially for the students who want to pass the H19-404_V1.0 Certification Exam with good marks in a short time. These HCSE-Presales-Campus Network Planning and Design V1.0 (H19-404_V1.0) practice test questions are available in three different formats that you can carry with you anywhere and even do preparation in extra or free time with ease.
| Section | Objectives |
|---|---|
| Topic 1: Huawei Campus Network Products and Solutions | - Campus Network Product Portfolio
|
| Topic 2: Campus WLAN Planning and Design | - WLAN Technologies
|
| Topic 3: Campus Network Security Design | - Security Planning
|
| Topic 4: Campus Network Solution Architecture and Design | - Enterprise Campus Network Architecture
|
| Topic 5: Pre-sales Methodology and Solution Presentation | - Pre-sales Skills
|
| Topic 6: CloudCampus and Intelligent Campus Solutions | - CloudCampus Architecture
|
| Topic 7: Campus SD-WAN Planning and Design | - SD-WAN Solutions
|
| Topic 8: Industry Scenario Solution Design | - Industry-Oriented Campus Solutions
|
>> H19-404_V1.0 Latest Study Materials <<
Compared with products from other companies, our H19-404_V1.0 practice materials are responsible in every aspect. After your purchase of our H19-404_V1.0 exam braindumps, the after sales services are considerate as well. We have considerate after sales services with genial staff. They are willing to solve the problems of our H19-404_V1.0 training guide 24/7 all the time. If you have any question that you don't understand, just contat us and we will give you the most professional advice immediately.
NEW QUESTION # 41
Which of the following BGP NLRI address-family combinations is used to transmit SD-WAN tunnel encapsulation information?
Answer: D
Explanation:
AFI 1 with SAFI 74 is the correct combination. In Multiprotocol BGP, the Address Family Identifier defines the basic network-layer address family, while the Subsequent Address Family Identifier specifies how the associated NLRI is interpreted. AFI 1 represents IPv4. SAFI 74 is assigned for SD-WAN capabilities and is used to distribute information required for SD-WAN edge discovery and tunnel establishment, including transport and encapsulation-related attributes.
The other combinations represent different forms of reachability information. AFI 1/SAFI 1 is ordinary IPv4 unicast NLRI. AFI 1/SAFI 2 represents IPv4 multicast reachability. AFI 25 represents Layer 2 VPN information, while SAFI 70 represents Ethernet VPN routes; that combination is associated with EVPN rather than the specific SD-WAN capability NLRI requested.
Huawei's architecture uses BGP-based control channels to exchange transport network port information, IPsec security-association information, and service routes. These parameters allow edge devices to determine peer endpoints and create GRE or GRE-over-IPsec data channels after the relevant service routes trigger tunnel establishment.
NEW QUESTION # 42
iMaster NCE-Campus can identify terminals. Which of the following services can be provided after terminal identification?
Answer: B,C,D
Explanation:
After identifying a terminal, iMaster NCE-Campus can use the identification result for security monitoring, visibility, and policy automation. Spoofing detection is supported because the platform can compare a terminal's current type and traffic behavior with its previously identified characteristics. For example, if a device originally identified as an IP phone suddenly behaves like a PC, the system can generate a spoofing alarm or apply an isolation policy.
Terminal identification also supports statistics and reporting by vendor, operating system, device category, access port, and policy status. Huawei explicitly describes terminal-type statistics, report export, and visibility of access policies.
In addition, iMaster NCE-Campus can automatically deliver VLAN, security-group, QoS, authentication, and access-permission policies according to the identified terminal type. Option B is incorrect because wired authentication is an admission process, not a service produced after terminal identification. Therefore, A, C, and D are correct.
NEW QUESTION # 43
Which of the following are WAN interconnection models for multi-branch campus networks?
Answer: A,B,D
Explanation:
Huawei SD-WAN supports full-mesh, hub-spoke, and partial-mesh interconnection models. In a full-mesh topology, every site can communicate directly with the other sites. This model minimizes intermediate forwarding and is appropriate when branches frequently exchange latency-sensitive traffic such as voice, video, or collaborative application data.
In a hub-spoke topology, branch sites communicate with a central headquarters or data-center hub. Branch-to- branch traffic normally traverses that hub. The model is simple, scalable, and suitable for enterprises whose applications and shared resources are concentrated at headquarters.
Partial-mesh is used when most sites can communicate directly but some sites lack direct underlay connectivity or do not require direct tunnels. Those sites can communicate through a redirect or intermediate site. Huawei describes full-mesh, hub-spoke, and partial-mesh as supported topology designs and explains the role of a redirect site in partial-mesh networking.
"Partial-spoke" is not a defined SD-WAN topology model. A spoke is a role within hub-spoke networking rather than an independent partial-spoke topology. Therefore, A, B, and D are correct.
NEW QUESTION # 44
On a large campus network, inter-WAC roaming should be avoided as much as possible to ensure the roaming experience.
Answer: B
Explanation:
The statement is true as a WLAN design recommendation. Inter-WAC roaming is supported, but it introduces more control-plane interaction and forwarding complexity than intra-WAC roaming. The Home WAC and Foreign WAC must belong to the same mobility group, synchronize station and AP information, and establish an inter-WAC CAPWAP tunnel for control information and, in some scenarios, service forwarding.
Additional synchronization, tunnel processing, route handling, and failure dependencies can increase roaming delay and complicate troubleshooting. This is especially relevant for delay-sensitive applications such as voice, video, automated guided vehicles, and real-time production systems. A better design places APs between which users frequently move under the same WAC wherever controller capacity and physical topology permit.
Avoiding inter-WAC roaming does not mean disabling the function entirely. Large campuses may require multiple WACs for scale, redundancy, or geographic distribution. Mobility groups should still be configured for unavoidable cross-controller movement. However, buildings, floors, and continuous roaming areas should be assigned carefully so that normal roaming remains intra-WAC. Therefore, the recommendation in the statement is correct, and the answer is True.
NEW QUESTION # 45
If multiple Internet links are available, these links cannot be prioritized and can only be load-balanced.
Answer: B
Explanation:
The statement is false because Huawei SD-WAN supports both priority-based link selection and load balancing. Multiple Internet or WAN links do not have to be treated equally. An administrator can define a preferred or primary link and designate another link as secondary or backup according to application requirements, link quality, cost, bandwidth, or operational policy.
For delay- and packet-loss-sensitive services such as voice and video, a higher-quality link can be configured as the primary path and another link as the backup. If the primary link no longer satisfies the configured SLA thresholds, traffic can be dynamically switched to a better path. Huawei's material explicitly describes primary and secondary link selection based on SLA and also presents load-balancing-based steering as a separate option.
Load balancing is useful when an enterprise wants to utilize the bandwidth of multiple links concurrently.
Priority-based active/standby forwarding is preferable when one provider offers better quality or when one circuit should be reserved for critical services. Intelligent traffic steering can additionally consider application priority and current bandwidth utilization. Therefore, multiple links can be prioritized, load-balanced, or used in a policy-controlled combination, making option B correct.
NEW QUESTION # 46
......
Many people may worry that the H19-404_V1.0 guide torrent is not enough for them to practice and the update is slowly. We guarantee you that our experts check whether the H19-404_V1.0 study materials is updated or not every day and if there is the update the system will send the update to the client automatically. So you have no the necessity to worry that you don’t have latest H19-404_V1.0 Exam Torrent to practice. We provide the best service to you and hope you are satisfied with our H19-404_V1.0 exam questions and our service.
H19-404_V1.0 Pass Guide: https://www.dumpstorrent.com/H19-404_V1.0-exam-dumps-torrent.html