H19-404_V1.0ファンデーション & H19-404_V1.0日本語版対応参考書

今まで、たくさんのお客様はHuawei H19-404_V1.0試験参考資料に満足しています。そのほかに、弊社は引き続くみんなに合理的な価格で高品質なH19-404_V1.0参考資料を提供します。もちろん、いいサービスを提供し、H19-404_V1.0参考資料について、何か質問がありましたら、遠慮なく弊社と連絡します。

Huawei H19-404_V1.0 Exam Syllabus Topics:

SectionObjectives
Topic 1: CloudCampus and Intelligent Campus Solutions- CloudCampus Architecture
  • 1. iMaster NCE-CampusInsight
  • 2. Intelligent O&M capabilities
  • 3. CloudCampus solution overview
  • 4. iMaster NCE-Campus
Topic 2: Industry Scenario Solution Design- Industry-Oriented Campus Solutions
  • 1. Healthcare and government scenarios
  • 2. Large campus deployment planning
  • 3. Education campus scenarios
  • 4. Enterprise office scenarios
Topic 3: Campus WLAN Planning and Design- WLAN Technologies
  • 1. AP deployment planning
  • 2. Capacity and coverage design
  • 3. WLAN architecture
  • 4. RF fundamentals
Topic 4: Huawei Campus Network Products and Solutions- Campus Network Product Portfolio
  • 1. Network management platforms
  • 2. Campus switches
  • 3. Campus security products
  • 4. Wireless LAN products
Topic 5: Campus Network Solution Architecture and Design- Enterprise Campus Network Architecture
  • 1. Campus network evolution trends
  • 2. Enterprise campus solution architecture
  • 3. Hierarchical campus network design
Topic 6: Pre-sales Methodology and Solution Presentation- Pre-sales Skills
  • 1. Technical proposal design
  • 2. Customer requirement analysis
  • 3. Network planning tools
  • 4. Solution value presentation
Topic 7: Campus Network Security Design- Security Planning
  • 1. Network access control
  • 2. Free mobility
  • 3. User authentication
  • 4. Security policy design
Topic 8: Campus SD-WAN Planning and Design- SD-WAN Solutions
  • 1. Application experience assurance
  • 2. Branch interconnection design
  • 3. WAN optimization planning
  • 4. SD-WAN architecture

>> H19-404_V1.0ファンデーション <<

現実的なH19-404_V1.0ファンデーション | 素晴らしい合格率のH19-404_V1.0: HCSE-Presales-Campus Network Planning and Design V1.0 | 初段のH19-404_V1.0日本語版対応参考書

H19-404_V1.0認定資格を取得して、専門能力を高めてください。認定資格を取得すると、より良い仕事の機会とより高い給料を得ることができます。それでは、H19-404_V1.0試験トレーニングガイドから準備を始めましょう。 Tech4Examが提供するH19-404_V1.0実践PDFは、すべてのお客様に適した最新かつ有効なものです。無料デモは、特に購入前に無料でダウンロードして試してみることができます。 H19-404_V1.0模擬試験ダンプから多くを取得し、H19-404_V1.0認定を簡単に取得できます。

Huawei HCSE-Presales-Campus Network Planning and Design V1.0 認定 H19-404_V1.0 試験問題 (Q23-Q28):

質問 # 23
Which of the following statements is false about GRE over IPsec?

正解:D

解説:
Option B is false because it reverses the encapsulation behavior. In IPsec transport mode, the IPsec security header is inserted after the existing IP header; a new outer IP header is not normally added. In tunnel mode, the complete original IP packet is encapsulated and a new outer IP header is added. Tunnel mode therefore generally introduces greater overhead and produces a longer packet than transport mode, not the reverse.
The remaining statements are correct. IPsec supports both transport and tunnel modes. GRE over IPsec performs GRE encapsulation first, allowing GRE to transport the original payload, and then applies IPsec protection to the resulting GRE packet. The IPsec security association is established between the GRE tunnel endpoints, protecting the GRE-encapsulated traffic as it traverses an untrusted transport network.
Huawei SD-WAN data channels can use either GRE or GRE over IPsec. GRE provides flexible overlay encapsulation, while IPsec adds confidentiality, integrity, origin authentication, and anti-replay protection for site-to-site traffic. Huawei specifically identifies IPsec encryption as the mechanism securing site-to-site SD- WAN services.


質問 # 24
Which of the following are WAN interconnection models for multi-branch campus networks?

正解:A、B、C

解説:
Huawei SD-WAN supports full-mesh, hub-spoke, and partial-mesh interconnection models. In a full-mesh topology, every site can communicate directly with the other sites. This model minimizes intermediate forwarding and is appropriate when branches frequently exchange latency-sensitive traffic such as voice, video, or collaborative application data.
In a hub-spoke topology, branch sites communicate with a central headquarters or data-center hub. Branch-to- branch traffic normally traverses that hub. The model is simple, scalable, and suitable for enterprises whose applications and shared resources are concentrated at headquarters.
Partial-mesh is used when most sites can communicate directly but some sites lack direct underlay connectivity or do not require direct tunnels. Those sites can communicate through a redirect or intermediate site. Huawei describes full-mesh, hub-spoke, and partial-mesh as supported topology designs and explains the role of a redirect site in partial-mesh networking.
"Partial-spoke" is not a defined SD-WAN topology model. A spoke is a role within hub-spoke networking rather than an independent partial-spoke topology. Therefore, A, B, and D are correct.


質問 # 25
Which of the following parameters is not mandatory for GRE configuration?

正解:A

解説:
Enabling the GRE checksum is optional. A functional point-to-point GRE tunnel requires a tunnel interface, GRE as the tunnel protocol, and reachable source and destination tunnel endpoints. The source identifies the local interface or IP address used to construct the delivery header, while the destination identifies the remote GRE endpoint. Without these endpoint parameters, the device cannot correctly encapsulate and deliver packets to the peer.
The checksum field is controlled by the Checksum Present bit in the GRE header. When checksum processing is enabled, the sender includes a checksum covering the GRE header and payload, and the receiver verifies it.
This can provide additional corruption detection, but it increases processing and is not required for basic GRE operation. RFC 2784 explicitly labels the checksum field as optional and states that it is present only when the Checksum Present bit is set.
Huawei SD-WAN uses GRE or GRE over IPsec to establish data channels between edge devices. The essential tunnel and transport-network information is distributed through the control system, while optional GRE functions such as checksum validation may be enabled according to operational requirements.


質問 # 26
Which of the following models supports IPS, antivirus, and URL filtering at the same time?

正解:B

解説:
The AR5710-SE is the security-enhanced model that supports intrusion prevention, antivirus, and URL filtering concurrently. The "SE" variant is designed for branch scenarios requiring integrated routing and advanced security processing instead of only basic WAN connectivity and packet forwarding.
IPS examines network traffic for attack signatures and abnormal behavior and can block detected intrusions.
Antivirus inspection identifies malicious files or content using security-signature databases. URL filtering controls access to websites based on categories, reputation, or explicitly configured allowlists and blocklists.
Supporting all three functions simultaneously allows the AR5710-SE to operate as both an SD-WAN CPE and a secure branch egress gateway, reducing the requirement for an additional branch firewall.
Huawei's SD-WAN security architecture identifies firewall protection, antivirus, IPS, and URL filtering as its principal service-traffic security functions. Huawei also recommends advanced security functions such as URL filtering, IPS, and antivirus for branch scenarios requiring stronger Internet-egress protection. Among the listed models, the AR5710-SE provides the combined feature set. Therefore, option A is correct.


質問 # 27
Which of the following Wi-Fi 7 APs offers PCIe card-based IoT functions?

正解:C

解説:
The AirEngine 6776I-X6TH is the model designed to provide PCIe card-based IoT expansion. The PCIe interface enables an appropriate IoT expansion card to be installed so that the AP can support additional wireless or sensing technologies according to the deployment requirement. This allows the same physical access infrastructure to deliver enterprise Wi-Fi and IoT connectivity.
The capability is useful in retail, healthcare, education, manufacturing, and asset-management environments, where technologies such as Bluetooth, RFID, Zigbee, electronic shelf labels, location services, or specialized sensing systems may need to coexist with the WLAN. A modular card design is preferable when an organization requires selectable or upgradeable IoT functions rather than only fixed integrated capabilities.
Huawei's Wi-Fi and IoT convergence architecture reduces repeated cabling, separate power systems, and independently managed wireless networks. It enables an IoT-capable AP to provide the installation position, power, management connectivity, and uplink data channel required by IoT modules. Among the models listed, the AirEngine 6776I-X6TH is the PCIe card-based IoT model. Therefore, option A is correct.


質問 # 28
......

H19-404_V1.0問題集を買うとき、支払いが成功したら、お客様は問題集をダウンロードできます。H19-404_V1.0問題集の有効性を確保する為に、HuaweiはH19-404_V1.0問題集のに対して、定期的に検査します。そうすれば、お客様にH19-404_V1.0問題集の最新版を提供できます。

H19-404_V1.0日本語版対応参考書: https://www.tech4exam.com/H19-404_V1.0-pass-shiken.html