ValidVCE customizable practice exams (desktop and web-based) help students know and overcome their mistakes. The customizable Nokia SRAN-Radio-Network-Performance-Optimization practice test means that the users can set the MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) Dumps and time according to their needs so that they can feel the real-based SRAN-Radio-Network-Performance-Optimization exam scenario and learn to handle the pressure.
| Section | Objectives |
|---|---|
| Topic 1: SRAN Architecture Overview | - SRAN network structure and components
|
| Topic 2: Radio Network Performance Fundamentals | - Key performance indicators (KPIs)
|
| Topic 3: RF Optimization Principles | - Coverage and capacity optimization
|
| Topic 4: Troubleshooting and Performance Analysis | - Network issue identification and resolution
|
| Topic 5: LTE/NR Performance Optimization | - Optimization techniques
|
>> SRAN-Radio-Network-Performance-Optimization New Braindumps Files <<
If you are ready for the exam for a long time, but lack of a set of suitable SRAN-Radio-Network-Performance-Optimization learning materials, I will tell you that you are so lucky to enter this page. We are such SRAN-Radio-Network-Performance-Optimization exam questions that you can use our products to prepare the exam and obtain your dreamed SRAN-Radio-Network-Performance-Optimization certificates. We all know that if you desire a better job post, you have to be equipped with appropriate professional quality and an attitude of keeping forging ahead. Our SRAN-Radio-Network-Performance-Optimization exam questions will be your best ally to get what you wanted.
NEW QUESTION # 25
In a 5G NSA Option 3x deployment, why should we not define 5G neighbors in LTE sectors where there is no 5G coverage ?
Answer: B
Explanation:
The correct answer is A .
In 5G NSA Option 3x , LTE acts as the Master Cell Group , and NR acts as the Secondary Cell Group , usually added through EN-DC . If 5G NR neighbors are configured in an LTE sector where there is actually no 5G coverage , the LTE eNB may still configure the UE to perform NR measurements.
To perform NR inter-RAT or inter-frequency measurements, the UE may require measurement gaps .
During these gaps, the UE stops normal LTE reception/transmission activities to measure NR frequencies. If there is no real 5G coverage, those gaps become wasted measurement time and can reduce LTE user throughput.
Option B is not the best answer because if there is no 5G coverage, the main issue is not successful SCG addition or handover degradation, but unnecessary measurement activity. Option C is also not correct because redirection from 5G to 4G normally occurs when the UE is already on or connected to 5G coverage, which is not the case here.
Therefore, the main reason is:
LTE throughput degradation due to unnecessary measurement gap configuration.
NEW QUESTION # 26
In a 5G cell , the following parameter has been modified: lowLatencyReservation = 15 .
Which percentage of UEs will be reallocated to a higher SR periodicity group whenever the threshold for moving to a higher SR periodicity group is reached?
Answer: C
Explanation:
The correct answer is C .
In 5G uplink scheduling, SR , or Scheduling Request , is used by the UE to request uplink resources when it has data to send. SR periodicity affects uplink latency and PUCCH capacity: shorter SR periodicity gives lower latency but consumes more control-channel resources, while longer SR periodicity saves resources but increases delay.
The parameter lowLatencyReservation = 15 means 15% of the UE/resource share is reserved for the low- latency SR periodicity group. When the load threshold is reached, the remaining portion can be moved to a higher SR periodicity group.
Calculation:
100% # 15% = 85%
So the percentage of UEs that can be reallocated to a higher SR periodicity group is:
0.85 , or 85% .
NEW QUESTION # 27
What is the mandatory prerequisite to implement DSS , or Dynamic Spectrum Sharing ?
Answer: D
Explanation:
The correct answer is D .
DSS allows LTE and 5G NR to share the same spectrum dynamically , instead of requiring a separate dedicated NR carrier. Therefore, dedicated NR spectrum is not mandatory. DSS is also not limited to TDD only; it is commonly used in FDD spectrum refarming scenarios as well. Public RAN references describe DSS as a mechanism where LTE and NR coexist in the same frequency band and share spectrum dynamically.
From an SRAN architecture point of view, the mandatory deployment condition is that the radio platform must support LTE and NR coexistence on the same radio resources. That requires RF module sharing or a DSS-capable shared radio configuration.
So the correct prerequisite is:
RF module sharing.
NEW QUESTION # 28
What is the role of admission control in 5G networks ?
Answer: A
Explanation:
The correct answer is D .
Admission control is responsible for deciding whether a new UE connection, bearer, service, or session can be accepted by the cell without negatively affecting existing users and services.
In 5G RAN, admission control checks available radio resources such as:
* PRB availability
* PDCCH/PUCCH capacity
* UE context capacity
* QoS requirements
* GBR or non-GBR bearer requirements
* Cell load and congestion status
It does not directly manage modulation schemes; that is handled by link adaptation. It also does not directly increase spectral efficiency or optimize downlink throughput, although good admission control indirectly protects user experience and avoids overload.
So the main role of admission control is:
To check whether there are enough resources for new connections.
NEW QUESTION # 29
The slice type SST value for Extreme Broadband is typically:
Answer: A
Explanation:
The correct answer is B .
In 5G network slicing, SST means Slice/Service Type . It identifies the high-level service category of a network slice.
Typical standardized SST values are:
SST = 1 # eMBB, enhanced Mobile Broadband
SST = 2 # URLLC, Ultra-Reliable Low-Latency Communication
SST = 3 # MIoT/mMTC, Massive IoT or massive Machine Type Communication
SST = 4 # V2X-related slice type
"Extreme Broadband" is normally aligned with eMBB , because it refers to high data rate, high capacity, and broadband user experience.
Therefore, the SST value for Extreme Broadband is:
1.
NEW QUESTION # 30
......
Are you an ambitious person and do you want to make your life better right now? If the answer is yes, then you just need to make use of your spare time to finish learning our SRAN-Radio-Network-Performance-Optimization exam materials and we can promise that your decision will change your life. So your normal life will not be disturbed. Please witness your growth after the professional guidance of our SRAN-Radio-Network-Performance-Optimization Study Materials. In short, our SRAN-Radio-Network-Performance-Optimization real exam will bring good luck to your life.
Latest SRAN-Radio-Network-Performance-Optimization Braindumps: https://www.validvce.com/SRAN-Radio-Network-Performance-Optimization-exam-collection.html