BONUS!!! Download part of ExamCost CWAP-405 dumps for free: https://drive.google.com/open?id=1AXFuaq6fWJES8LP410KQTr5sOdMjBx3d
Our CWAP-405 exam questions are very outstanding. People who have bought our products praise our company highly. In addition, we have strong research competence. So you can always study the newest version of the CWAP-405 exam questions. Also, you can enjoy the first-class after sales service. Whenever you have questions about our CWAP-405 Actual Test guide, you will get satisfied answers from our online workers through email. We are responsible for all customers. All of our CWAP-405 question materials are going through strict inspection. The quality completely has no problem. The good chance will slip away if you still hesitate.
| Section | Objectives |
|---|---|
| RF and PHY Layer Analysis | - 802.11 PHY Standards Overview - Channelization and Spectrum Usage - RF Propagation and Signal Behavior |
| Wireless Troubleshooting and Performance Analysis | - Common WLAN Failure Scenarios - Throughput and Latency Analysis - Identifying WLAN Performance Issues |
| Spectrum Analysis and Tools | - Spectrum Analyzer Usage - Interference Identification (Wi-Fi and Non-Wi-Fi) - Wireshark and Packet Capture Analysis |
| WLAN Protocol Analysis | - Frame Types and Exchanges (Management, Control, Data) - MAC Layer Operations and Behaviors - 802.11 Frame Structure and Fields |
If you are remain an optimistic mind all the time when you are preparing for the CWAP-405 exam, we deeply believe that it will be very easy for you to successfully pass the CWAP-405 exam, and get the related CWAP-405 certification in the near future. Of course, we also know that how to keep an optimistic mind is a question that is very difficult for a lot of people to answer. As is known to us, where there is a will, there is a way. We believe you will get wonderful results with the help of our CWAP-405 Exam Questions as we have been professional in this field.
NEW QUESTION # 74
What is encrypted within the third message of the 4-Way Handshake?
Answer: D
Explanation:
The GTK (Group Temporal Key) is encrypted within the third message of the 4-Way Handshake. The 4-Way Handshake is a process that establishes a secure connection between a STA (station) and an AP (access point) using WPA2 (Wi-Fi Protected Access 2), which is a security protocol that uses AES-CCMP (Advanced Encryption Standard-Counter Mode CBC-MAC Protocol) as its encryption algorithm. The 4-Way Handshake consists of four messages that are exchanged between the STA and the AP. The first message is sent by the AP to the STA, containing the ANonce (Authenticator Nonce), which is a random number generated by the AP. The second message is sent by the STA to the AP, containing the SNonce (Supplicant Nonce), which is a random number generated by the STA, and the MIC (Message Integrity Code), which is a value that verifies the integrity of the message. The third message is sent by the AP to the STA, containing the GTK, which is a key that is used to encrypt and decrypt multicast and broadcast data frames, and the MIC. The GTK is encrypted with the KEK (Key Encryption Key), which is derived from the PTK (Pairwise Temporal Key).
The PTK is a key that is used to encrypt and decrypt unicast data frames, and it is derived from the PMK (Pairwise Master Key), the ANonce, and the SNonce. The fourth message is sent by the STA to the AP, containing only the MIC, to confirm the completion of the 4-Way Handshake. The other options are not correct, as they are not encrypted within the third message of the 4-Way Handshake. The PMK is a key that is derived from a passphrase or obtained from an authentication server, and it is not transmitted in any message of the 4-Way Handshake. The PTK is a key that is derived from the PMK, the ANonce, and the SNonce, and it is not transmitted in any message of the 4-Way Handshake. The GMK (Group Master Key) is a key that is generated by the AP and used to derive the GTK, and it is not transmitted in any message of the 4-Way Handshake. References: [Wireless Analysis Professional Study Guide CWAP-405], Chapter 8: Security Analysis, page 211-213
NEW QUESTION # 75
Given: The Frame Check Sequence (FCS) is a 32 CRC used for error detection.
The CRC is calculated over what?
Answer: A
Explanation:
The CRC is calculated over the MAC Header and Frame Body only. The CRC (Cyclic Redundancy Check) is a 32-bit value that is used for error detection in wireless transmissions. The CRC is calculated over the MAC Header and Frame Body of a PSDU, which are the parts of the data unit that contain information such as source and destination addresses, frame type, frame control, sequence number, payload, etc. The CRC is appended to the end of the PSDU as a FCS (Frame Check Sequence) field. The CRC is not calculated over the PHY Header or PHY Preamble, which are parts of the PPDU that contain information such as modulation, coding, data rate, etc. The PHY Header and PHY Preamble are added or removed by the PHY layer during the conversion between PSDU and PPDU. References: [Wireless Analysis Professional Study Guide CWAP-
405], Chapter 4: 802.11 Physical Layer, page 97-98
NEW QUESTION # 76
Where would you look in a packet trace file to identify the configured Minimum Basic Rate (MBR) of a BSS?
Answer: C
Explanation:
The configured Minimum Basic Rate (MBR) of a BSS can be identified by looking at the Supported Rates and Extended Supported Rates elements in a Beacon frame. A Beacon frame is a type of management frame that is transmitted by an AP to advertise its presence and capabilities to potential clients. A Beacon frame contains various information elements (IEs) that provide details about the BSS configuration and operation.
The Supported Rates and Extended Supported Rates IEs list the data rates that are supported by the AP for data transmission. The MBR is the lowest data rate among these supported rates that is required for all clients to join and communicate with the BSS. The MBR is usually marked with a flag bit in these IEs to indicate its mandatory status. The other options are not correct, as they do not exist or do not indicate the MBR of a BSS. References: [Wireless Analysis Professional Study Guide CWAP-405], Chapter 5: 802.11 MAC Sublayer, page 123-124
NEW QUESTION # 77
Which piece of information is not transmitted in any of the 4-Way Handshake frames?
Answer: A
Explanation:
The 4-Way Handshake in WPA/WPA2 does not transmit the Pairwise Master Key (PMK) over the air. Instead, it uses the PMK to derive the Pairwise Transient Key (PTK). The handshake frames carry the ANonce, MIC, and GTK (in the Group Key Handshake) but never the PMK itself.
NEW QUESTION # 78
When using a commercial WLAN protocol analyzer, you notice that it is listing vendor names for some APs and client STAs.
What is the source of this information?
Answer: D
NEW QUESTION # 79
......
Memorizing these Certified Wireless Analysis Professional CWAP-405 valid dumps will help you easily attempt the CWNP CWAP-405 exam within the allocated time. Thousands of aspirants have passed their CWNP CWAP-405 Exam, and they all got help from our Certified Wireless Analysis Professional CWAP-405 updated exam dumps. For successful preparation, you can also rely on CWAP-405 real questions.
Cert CWAP-405 Guide: https://www.examcost.com/CWAP-405-practice-exam.html
P.S. Free & New CWAP-405 dumps are available on Google Drive shared by ExamCost: https://drive.google.com/open?id=1AXFuaq6fWJES8LP410KQTr5sOdMjBx3d