The NSE7_FSN_AR-7.6 exam dumps are the ideal study material for quick and complete NSE7_FSN_AR-7.6 exam preparation. The real and top-notch Fortinet NSE7_FSN_AR-7.6 exam questions are being offered in three different formats. These formats are Fortinet NSE7_FSN_AR-7.6 PDF Dumps Files, desktop practice test software, and web-based practice test software.
| Section | Objectives |
|---|---|
| Enterprise Firewall | - Advanced firewall deployment - Centralized management and analytics - Authentication and identity - High availability - VPN technologies - Routing and advanced networking - Troubleshooting - Security Fabric integration |
| SD-WAN | - Overlay VPN - Application steering - Deployment and troubleshooting - Performance SLA - SD-WAN architecture - SD-WAN routing |
>> Actual NSE7_FSN_AR-7.6 Tests <<
Our product for the NSE7_FSN_AR-7.6 exam is compiled by the skilled professionals who have studyed the exam for years, therefore the quality of the practic materials are quite high, it will help you to pass the exam with ease. Free update for the latested version within one year are available. And the questions and answers of the NSE7_FSN_AR-7.6 Exam are from the real exam, and the answers are also verified by the experts, and money back guarantee. The payment of the NSE7_FSN_AR-7.6 exam is also safe for our customers, we apply online payment with credit card, it can ensure the account safety of our customers.
NEW QUESTION # 164
Refer to the exhibits.
How does FortiGate handle traffic with the source IP address 10.0.1.125 and the destination IP address
128.66.0.125?
Answer: A
Explanation:
The traffic matches service 2's address criteria: 10.0.1.125 belongs to the configured source range 10.0.1.0-
10.0.1.255, and 128.66.0.125 belongs to the destination range 128.66.0.0-128.66.255.255. Service 2 lists port7 and port8 as selected SLA members and uses round-robin load balancing.
However, the SD-WAN guide states: "SD-WAN requires a valid route in the forwarding information base (FIB) so the member can be used to steer traffic." The routing table contains routes through port7 and port8 only for 10.0.1.0/24. It contains no route to 128.66.0.125 through either member.
The only route covering the destination is the default route, which has equal-cost paths through port1 and port2. Consequently, port7 and port8 cannot be used for this flow despite being SLA-selected. FortiGate skips the unusable explicit SD-WAN rule and processes the traffic through the implicit rule using standard FIB routing. Therefore, option A is correct. Options B and C incorrectly assume that selected overrides route availability, while option D is incorrect because valid default routes exist.
NEW QUESTION # 165
Refer to the exhibit.
The modified output of live routing kemel is shown
Which two statements about the output are (rue? (Choose two.)
Answer: A,D
Explanation:
We must analyze the flags (*, > , S, O, B) and Administrative Distances (AD) shown in the get router info routing-table database exhibit to determine the correct statements.
Analysis for Option A (The BGP route to 10.0.4.0/24 is not in the forwarding information base):
True. Look at the entry for 10.0.4.0/24.
There is an OSPF route: O * > 10.0.4.0/24 [110/2]. The * indicates it is in the FIB, and > indicates it is the selected route.
There is a BGP route: B 10.0.4.0/24 [200/10]. This line lacks the * flag.
Reason: The OSPF route has an Administrative Distance of 110. The BGP route (iBGP) has an AD of 200.
Since 110 is lower than 200, OSPF wins, and the BGP route is not installed in the Forwarding Information Base (FIB).
Analysis for Option B (The default static route through 10.200.1.254 is in the forwarding information base):
True. Look at the 0.0.0.0/0 entries.
The first entry is S * > 0.0.0.0/0 [10/0] via 10.200.1.254.
The * flag confirms this specific route is installed in the FIB.
The second static route (via 10.200.2.254) has a higher distance ([20/0]) and no * flag, so it is inactive.
Why C is False: ECMP (Equal Cost Multi-Path) requires routes to have the same cost/priority. Here, one static route has AD 10 and the other has AD 20. They are not equal, so ECMP is not performed.
Why D is False: The routing table database shows active routes, not the raw Link State Advertisement (LSA) database. You cannot determine the number of LSAs received solely from this output.
Reference:
FortiGate Security 7.6 Study Guide (Routing): " The routing table database displays all known routes... The * indicates the route is in the FIB... Lower Administrative Distance is preferred. "
NEW QUESTION # 166
Refer to the exhibits.
Exhibit - Routing tables of FortiGate_A and FortiGate_B
The routing tables of FortiGate_A and FortiGate_B are shown.
FortiGate_A and FortiGate_B are in the same autonomous system.
You want to add only route 172.16.1.248/30 on FortiGate_A by updating the BGP configuration.
Which configuration must you apply?
Answer: D
Explanation:
" By default, the prefix is advertised only when it matches the destination subnet of an active route in the routing table " Technical Explanation:
The exhibit shows that FortiGate_B has the network 172.16.1.248/30 installed as a directly connected route.
The administrator wants to advertise this specific network to FortiGate_A through BGP without unintentionally advertising other connected networks.
Option D is correct because the BGP network command allows an administrator to originate a specific prefix into BGP.
An appropriate configuration on FortiGate_B is:
config router bgp
config network
edit 1
set prefix 172.16.1.248 255.255.255.252
next
end
end
By default, FortiOS checks whether the configured prefix exactly matches an active route in the routing table before originating the advertisement.
Because 172.16.1.248/30 is directly connected to FortiGate_B, this condition is satisfied.
FortiGate_B can therefore originate that prefix, allowing FortiGate_A to learn it through the established BGP session.
Why the other options are incorrect:
Option A: An inbound route map on FortiGate_A can filter or modify routes already advertised by its neighbor, but cannot cause FortiGate_B to originate the missing prefix.
Option B: Redistribute Connected can introduce multiple connected routes into BGP. Without suitable filtering, this would advertise more networks than the administrator intends.
Option C: An outbound route map can filter advertisements, but does not independently originate a connected prefix that has not been redistributed or declared using the BGP network command.
Architectural Consideration:
When a requirement specifies that only one prefix must be advertised, the BGP network statement offers precise control. Route maps can provide additional policy enforcement, but they do not replace the mechanism required to originate the prefix.
References: Enterprise Firewall 7.6 Administrator Study Guide, Dynamic Routing Supplement - Network Command, pages 345-346.
NEW QUESTION # 167
Refer to the exhibit.
The output of the command diagnose vpn tunnel list is shown.
Reviewing the debug command, what is the current status of the traffic flowing through the tunnel?
Answer: B
Explanation:
The correct answer is D. The inbound IPsec SA was copied to the NPU.
The exhibit shows:
npu_flag=02
dec_npuid=1
enc_npuid=0
The study guide gives the exact meaning of the npu_flag field:
npu_flag=00 = Both IPsec SAs loaded to the kernel
npu_flag=01 = Outbound IPsec SA copied to NPU
npu_flag=02 = Inbound IPsec SA copied to NPU
npu_flag=03 = Both outbound and inbound IPsec SAs copied to NPU
It also explains: "If the first IPsec packet is inbound and can be offloaded, the inbound SA is copied to the NPU and the npu_flag changes to 02. After both SAs are copied to the NPU, the npu_flag changes to 03." So with npu_flag=02, only the inbound SA has been copied to the NPU. That makes D correct.
Why the other options are wrong:
A is wrong because outbound-only offload would be npu_flag=01, not 02
C is wrong because both directions offloaded would be npu_flag=03, not 02 B is wrong because dec_npuid=1 identifies the NPU ID used for decryption, but it does not state that the processor is specifically NP6. The study guide only maps the offload state through the npu_flag values in this context, not the NPU model from this field alone So the verified answer is: D.
NEW QUESTION # 168
Refer to the exhibit, which shows the output of a BGP debug command.
What can you conclude about the router in this scenario?
Answer: C
Explanation:
The BGP debug output shows session information for peers, including state details. According to official Fortinet BGP documentation, if the session state with a peer does not show " Idle, " " Active, " or " Connect, " but instead shows " Established, " " Up, " or related counters (e.g., messages sent/received or uptime), it indicates the session is operational. In this scenario, the peer 10.127.0.75 is the only one showing a positive indication of a live, established session. Other options like neighbor-range configuration, AS mismatch, or route-maps blocking prefixes are not supported by evidence provided in a simple BGP session state debug, nor does the output show errors relating to local or remote AS issues.
The correct interpretation comes from Fortinet ' s BGP troubleshooting guide, which outlines how to read session status and neighbor states in debug and summary outputs.
References:
FortiOS BGP Debugging Guide: Session State Interpretation
BGP CLI Reference: Neighbor Status Fields
NEW QUESTION # 169
......
According to our investigation, the test syllabus of the NSE7_FSN_AR-7.6 exam is changing every year. Some new knowledge will be added into the annual real exam. Some old knowledge will be deleted. So you must have a clear understanding of the test syllabus of the NSE7_FSN_AR-7.6 study engine. Now, you can directly refer to our NSE7_FSN_AR-7.6 study materials. Because we have been in the field for over ten years and we are professional in this career. We can always offer the most updated information to our loyal customers.
Valid NSE7_FSN_AR-7.6 Test Online: https://www.examdumpsvce.com/NSE7_FSN_AR-7.6-valid-exam-dumps.html