Actual4test makes your investment 100% secure when you purchase 300-110 practice exams. We guarantee your success in the 300-110 exam. Otherwise, our full refund policy will enable you to get your money back. The practice exams for CCNP Wireless are prepared by the 300-110 subject experts who are well aware of the 300-110 exam syllabus requirements. Our Customer support team is 24/7 available that you can reach through email or Live Chat for any 300-110 exam preparation product related question.
| Section | Weight | Objectives |
|---|---|---|
| WLAN High Availability and Security Design | 20% | - High availability design
|
| Wireless Infrastructure Design | 30% | - Wireless Controller architecture and deployment
|
| Mobility Design | 25% | - Mobility architecture models
|
| Wireless Site Survey | 25% | - RF propagation and attenuation analysis - Layer 1 site survey execution and analysis - Design requirements collection and constraint evaluation
|
>> 300-110 Test Discount Voucher <<
After you visit the pages of our product on the websites, you will know the version, price, the quantity of the answers of our product, the update time, 3 versions for you to choose. You can dick and see the forms of the answers and the titles and the contents of our Designing Cisco Wireless Networks guide torrent. If you feel that it is worthy for you to buy our 300-110 Test Torrent you can choose a version which you favor, fill in our mail and choose the most appropriate purchase method and finally pay for our 300-110 study tool after you enter in the pay pages on the website. We will send the product to the client by the forms of mails within 10 minutes.
NEW QUESTION # 102
Which profile is included within a site tag when configured in a Cisco 9800 WLC architecture?
Answer: A
Explanation:
The Cisco Catalyst 9800 IOS XE WLC uses a tag-based configuration architecture. Three primary tag types are used: site tags, policy tags, and RF tags. The site tag associates an AP with its operational context and contains two specific profile references: the AP join profile (defining AP-level parameters such as NTP, syslog, SSH, LED behavior, and CAPWAP timers) and the flex profile (defining FlexConnect-specific parameters including locally switched VLANs, split tunneling, local authentication settings, and VLAN-ACL mappings). The flex profile within the site tag enables the AP to operate in FlexConnect mode with locally configured switching behavior when WLC connectivity is lost. QoS (Option A) policies are applied at the policy tag level within WLAN policies. NAT (Option B) is not a native profile type in the 9800 tag architecture. VLAN (Option D) configurations are defined within the flex profile or policy profile and are not standalone profile types at the tag level. Understanding the three-tag model is essential for designing and troubleshooting 9800-based deployments. Reference: WLSD Study Guide - Catalyst 9800 Configuration Model, Site Tag Architecture, Flex Profile and AP Join Profile.
NEW QUESTION # 103
What happens to an AP when a flex profile name is changed in a site tag?
Answer: D
Explanation:
On the Cisco Catalyst 9800 IOS XE WLC platform, the tag-based configuration model uses site tags to associate APs with specific profiles including a flex profile and an AP join profile. The site tag is a fundamental binding element -- when any component of a site tag is modified, including renaming the flex profile associated with that tag, the WLC treats this as a material configuration change requiring the AP to re-evaluate its operational parameters. Specifically, the AP must disconnect its existing DTLS (Datagram Transport Layer Security) control plane tunnel to the WLC and re-establish it. This DTLS session disconnect and rejoin cycle is equivalent to a full AP rejoin: CAPWAP discovery, DTLS handshake, join request, configuration download, and image verification. Client service is interrupted on the affected AP during this process.
NEW QUESTION # 104
An engineer is estimating the loss between two floors of an office building. Using Ekahau, they have measured -45 dBm at the ground level of the floor with the access point and -50 dBm at the ceiling level of the floor below it. Which value is the loss of the floor?
Answer: D
Explanation:
Floor loss calculation is a fundamental skill in multi-floor wireless site survey methodology. The floor attenuation value represents the signal power reduction caused by penetrating through a single floor structure including the floor decking, subfloor, ceiling material, plenum space, and any structural elements. In this measurement scenario, the engineer has two data points: -45 dBm measured at the ground level of the floor containing the access point (the signal level just below the AP ' s floor) and -50 dBm measured at the ceiling level of the floor below (the signal level just after passing through the floor structure). The floor loss is simply the difference between these two measurements: (-45 dBm) - (-50 dBm) = -45 + 50 = 5 dB. The result is expressed as a positive value (5 dB) representing attenuation - signal power decreases by 5 dB when passing through the floor. Expressing it as -5 dB (Option B) would incorrectly imply a signal gain. The 95 dB values (Options A and D) result from incorrectly adding rather than subtracting the dBm values - a common error when working with negative dBm figures. This floor attenuation value (5 dB) would then be entered into Ekahau ' s floor material properties to improve predictive model accuracy. Reference: WLSD Study Guide - Multi-Floor Signal Propagation, Floor Attenuation Factor (FAF), Ekahau Floor Loss Measurement Methodology.
NEW QUESTION # 105
A customer designs a Cisco wireless environment to provide connectivity to employees and guests. The guest SSID must be configured on three anchor WLCs named Anchor1, Anchor2, and Anchor3 in a DMZ. The guest anchor priority must be configured to ensure that Anchor1 has the highest priority. Which priority level must be incorporated in the design for Anchor1?
Answer: A
Explanation:
In Cisco ' s guest anchor WLC deployment model, multiple anchor controllers can be configured in a DMZ to provide redundancy for guest WLAN traffic. The anchor priority value determines which anchor controller is preferred for establishing the guest mobility tunnel from the foreign WLC. Cisco ' s anchor priority system assigns the highest preference to the lowest numerical priority value. Priority 1 is the highest priority, meaning the foreign WLC will prefer Anchor1 when establishing the CAPWAP mobility tunnel for anchoring guest client traffic. Priority 2 would be assigned to Anchor2, and Priority 3 to Anchor3, creating a deterministic failover hierarchy. If Anchor1 becomes unreachable, the foreign controller automatically falls over to Anchor2, then to Anchor3. Priority 0 is not a valid anchor priority value in the Cisco WLC configuration. This design pattern is critical for enterprise guest deployments where DMZ anchor redundancy must be maintained without manual intervention. Reference: WLSD Study Guide - Guest Wireless Architecture, Anchor WLC Configuration, Mobility and DMZ Design.
NEW QUESTION # 106
A university wants to deploy a high density of APs in an area where a high number of users congregate. Which functionality allows the university to optimize the RF settings for APs that operate in different environments or coverage zones?
Answer: C
Explanation:
RF Profiles are a Cisco WLC configuration construct that allows administrators to define a customized set of Radio Resource Management (RRM) parameters and apply them to a subset of APs operating in a specific environment or coverage zone. Within a university high-density deployment -- where a lecture hall, outdoor quad, cafeteria, and library may each require fundamentally different RF settings -- RF Profiles enable differentiation without globally modifying all RRM parameters. An RF Profile can define custom values for: minimum mandatory data rates, maximum transmit power, minimum transmit power, channel width (20/40/80 MHz), RxSOP thresholds, client load balancing parameters, and coverage hole detection sensitivity. This allows the engineer to apply aggressive interference mitigation settings to high-density assembly areas while maintaining full-coverage settings for perimeter zones.
NEW QUESTION # 107
......
Practice materials are typically seen as the tools of reviving, practicing and remembering necessary exam questions for the exam, spending much time on them you may improve the chance of winning. However, our 300-110 training materials can offer better condition than traditional practice materials and can be used effectively. We treat it as our major responsibility to offer help so our 300-110 Practice Guide can provide so much help, the most typical one is the efficiency of our 300-110 exam questions, which can help you pass the 300-110 exam only after studying for 20 to 30 hours.
300-110 Exam Reviews: https://www.actual4test.com/300-110_examcollection.html