In the face of fierce competition, you should understand the importance of time. You must walk in front of the competitors. If you have more strength, you will get more opportunities. Your dream life can really become a reality! AZ-802 learning materials are here, right to choose! And you will find that you will get benefited from AZ-802 Exam Braindumps far beyond you can image. Not only you can get more professional knowledage but also you can get the AZ-802 certification to find a better career.
| Section | Objectives |
|---|---|
| Disaster recovery and migration | - Backup and restore
|
| Monitoring and troubleshooting | - System monitoring
|
| Implement and manage high availability | - Failover clustering
|
| Manage hybrid compute and virtualization | - Virtual machines
|
| Networking and storage infrastructure | - Storage management
|
| Secure Windows Server hybrid infrastructures | - Security configuration
|
If you try to get the Administering Windows Server certification that you will find there are so many chances wait for you. You can get a better job; you can get more salary. But if you are trouble with the difficult of AZ-802 exam, you can consider choose our AZ-802 Exam Questions to improve your knowledge to pass AZ-802 exam, which is your testimony of competence. Now we are going to introduce our AZ-802 test guide to you, please read it carefully.
NEW QUESTION # 295
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains a management server named Server1 and a privileged user named Admin1. Admin1 uses Server1 to run Active Directory Users and Computers and Group Policy Management Console (GPMC). You apply a security baseline to all privileged users to prevent credential caching and delegation. After applying the baseline, Admin1 cannot open either console. The consoles return logon and access denied errors. You run klist tgt as Admin1, and receive the following error message: 0x8009030e: No credentials are available in the security package. You need to restore AD DS management access for Admin1 without changing domain-wide or server-wide authentication settings. What should you do?
Answer: D
Explanation:
The error 0x8009030e (SEC_E_NO_CREDENTIALS) after running klist tgt, combined with consoles that fail with logon and access-denied errors, is the signature symptom of the Protected Users security group:
members of Protected Users cannot use NTLM, cannot have their credentials cached, cannot use Kerberos DES or RC4 encryption, cannot be delegated, and critically cannot renew Kerberos TGTs beyond a 4-hour lifetime, which also blocks the credential caching that consoles such as Active Directory Users and Computers and GPMC rely on when they proxy requests through Server1. If the applied security baseline added Admin1 to Protected Users as its mechanism for enforcing no-caching and no-delegation, the side effect is that Admin1 ' s Kerberos ticket simply has no usable credentials left in the security package, exactly matching the observed error. Removing Admin1 from Protected Users restores the ability to obtain and cache the credentials the consoles need, without touching any domain-wide policy (such as the Default Domain Policy) or server-wide setting (such as an authentication policy silo or a GPO linked at the OU or domain level), satisfying the requirement to leave broader authentication settings unchanged. Resetting the password and unlocking the account would not address a Protected Users restriction. Enabling Digest authentication caching or the Allow delegating default credentials setting both concern different, unrelated authentication mechanisms and would not restore a Protected Users member ' s ability to obtain a usable TGT.
NEW QUESTION # 296
You have an Azure subscription that contains two virtual machines named VM1 and VM2. VM1 runs Windows Server. VM2 runs Ubuntu Linux. You need to monitor VM1 and VM2 by using VM insights. The solution must meet the following requirements:
* Ensure that you can monitor the memory usage on VM1.
* Ensure that you run the Map feature on VM2.
The solution must minimize the number of agents required for each virtual machine.
Which agents are required on each virtual machine? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Collecting standard performance counters such as memory usage through VM insights only requires the Azure Monitor Agent together with an associated data collection rule, so VM1 needs no additional agent. The Map feature, however, visualizes process-level dependencies and connections between machines, and that capability is provided specifically by the Dependency agent working alongside the Azure Monitor Agent; the Azure Monitor Agent alone does not populate the Map view. Because VM2 needs the Map feature, it requires both the Azure Monitor Agent and the Dependency agent, while the separate Azure Linux VM Agent is the base platform extension-hosting agent that is already present on the VM and is not an additional monitoring agent to add. Installing only the minimum agents needed for each requirement, rather than deploying the Dependency agent everywhere by default, keeps per-VM overhead lower and matches the stated requirement to minimize the number of agents on each virtual machine.
NEW QUESTION # 297
Your company has a main office and a branch office. The two offices are connected by using a WAN link.
Each office contains a firewall that filters WAN traffic. The network in the branch office contains 10 servers that run Windows Server. All servers are administered from the main office only. You plan to manage the servers in the branch office by using a Windows Admin Center gateway. On a server in the branch office, you install the Windows Admin Center gateway by using the default settings. You need to configure the firewall in the branch office to allow the required inbound connection to the Windows Admin Center gateway. Which inbound TCP port should you allow?
Answer: B
Explanation:
Windows Admin Center ' s gateway installation, by default, hosts its browser-based management portal over HTTPS on TCP port 443. Administrators at the main office reach the gateway server in the branch office by pointing a web browser at https:// < gatewayserver > , and that HTTPS session is what the branch office firewall must permit inbound from the WAN. Once that portal connection is established, the gateway itself relays management traffic to the target servers using WinRM (over HTTP/HTTPS) on the local network, but that relay happens between the gateway and the managed servers inside the branch office, not across the WAN link the firewall is filtering. Port 3389 is used for Remote Desktop Protocol (RDP) sessions, which is a different management channel entirely and not what a default Windows Admin Center gateway installation listens on. Port 5985 is the default WinRM HTTP port used for PowerShell remoting and is what the gateway uses internally to reach managed nodes, not the port browsers use to reach the gateway itself. Port 6516 is unrelated to Windows Admin Center. Because the requirement is specifically to let administrators ' browser sessions reach the gateway from across the WAN, the firewall must allow inbound TCP 443, matching the gateway ' s default HTTPS listener.
NEW QUESTION # 298
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. You implement a central store. You create a new Group Policy Object (GPO) named GPO1. When you attempt to edit GPO1, you see that the " Administrative Templates: Policy definitions (ADMX files) retrieved from the central store " node shows only two settings (far fewer than the normal full set of Administrative Template settings). You need to ensure that all settings are available. Solution: You delete the \\contoso.
com\SYSVOL\contoso.com\Policies\PolicyDefinitions folder. Does this meet the goal?
Group Policy Management Editor showing limited Administrative Templates settings
Answer: B
Explanation:
Windows does not automatically populate the Group Policy Central Store; an administrator creates the empty PolicyDefinitions folder in SYSVOL and must manually copy the full set of ADMX/ADML administrative template files into it. Once a Central Store exists, the Group Policy Management Editor exclusively displays the ADMX files that physically exist inside that Central Store -- it never falls back to using a workstation ' s local C:\Windows\PolicyDefinitions folder as long as the Central Store is present. The fact that only two settings appear means someone created the Central Store and copied in just a couple of custom ADMX
/ADML files (evidently ActiveX-related ones) but never copied in the full default Windows ADMX/ADML set, so this is fundamentally a content problem with the store, not a problem with GPO1 itself. Deleting the PolicyDefinitions folder entirely would cause the Group Policy Management Editor to fall back to whatever ADMX files exist locally on each individual administrator ' s own workstation -- which may vary in completeness from machine to machine and defeats the entire purpose of having a centralized, consistent store
-- rather than actually restoring the complete, intended set of settings in a centralized way. Therefore, deleting the Central Store ' s PolicyDefinitions folder does not meet the goal.
NEW QUESTION # 299
You have an Azure virtual machine named VM1 that runs Windows Server.
You need to ensure that you can use the Azure Policy machine configuration extension to manage VM1.
What should you do first?
Answer: A
Explanation:
Azure Machine Configuration needs the VM to authenticate to the Machine Configuration service. Microsoft states that an Azure VM managed by Machine Configuration must have a system-assigned managed identity; the identity is used by the extension when reading and writing Machine Configuration assignments and compliance information. Therefore, enabling VM1's system-assigned managed identity is the required first step among the choices. A user-assigned identity does not satisfy this prerequisite by itself. The PowerShell DSC extension and Custom Script Extension are separate Azure VM extensions used for different configuration or scripting scenarios and are not the prerequisite for Azure Policy Machine Configuration.
Once the identity requirement is satisfied, the Machine Configuration extension can be installed or deployed by policy and can authenticate correctly. Microsoft Learn
NEW QUESTION # 300
......
Perhaps you still cannot believe in our Microsoft AZ-802 study materials. You can browser our websites to see other customers real comments. Almost all customers highly praise our Microsoft AZ-802 Exam simulation. In short, the guidance of our AZ-802 practice questions will amaze you. Put down all your worries and come to purchase our AZ-802 learning quiz!
AZ-802 Exam Training: https://www.updatedumps.com/Microsoft/AZ-802-updated-exam-dumps.html