Exam 300-515 Questions Answers - 300-515 Reliable Test Experience

2026 Latest TestkingPass 300-515 PDF Dumps and 300-515 Exam Engine Free Share: https://drive.google.com/open?id=1TqYJQb_C0VxGTXyzvwce4Xj8tSojp9ZZ

The clients can consult our online customer service before and after they buy our Implementing Cisco Service Provider VPN Services guide dump. We provide considerate customer service to the clients. Before the clients buy our 300-515 cram training materials they can consult our online customer service personnel about the products’ version and price and then decide whether to buy them or not. After the clients buy the 300-515 study tool they can consult our online customer service about how to use them and the problems which occur during the process of using. If the clients fail in the test and require the refund our online customer service will reply their requests quickly and deal with the refund procedures promptly. In short, our online customer service will reply all of the clients’ questions about the 300-515 cram training materials timely and efficiently.

Cisco 300-515 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: VPN Architecture	25%	- Inter-AS and Intra-AS VPN - MPLS and VPN fundamentals - VPN deployment models - VPN service requirements and design considerations
Topic 2: IPv6 VPNs	15%	- IPv6 VPN migration and troubleshooting - Dual-stack VPN operation - 6VPE and 6PE - MP-BGP for VPNv6 routes - IPv6 PE-CE routing
Topic 3: Layer 2 VPNs	25%	- Ethernet VPN (EVPN) - L2VPN configuration and verification - L2TPv3 - MPLS-based L2VPN services - VPWS and VPLS - EVPN control plane and data plane
Topic 4: Layer 3 VPNs	35%	- VRF and VRF-lite - MP-BGP for VPNv4 routes - L3VPN troubleshooting - Inter-AS L3VPN options - Route target and route distinguishers - PE-CE routing protocols - MPLS L3VPN architecture

>> Exam 300-515 Questions Answers <<

Cisco 300-515 Exam is Easy with Our High-quality Exam 300-515 Questions Answers: Implementing Cisco Service Provider VPN Services Surely

If you are new to our 300-515 exam questions, you may doubt about them a lot. And that is normal. Many of our loyal customers first visited our website, or even they have bought and studied with our 300-515 practice engine, they would worried a lot. But when they finally passed the exam with our 300-515 simulating exam, they knew that it is valid and helpful. And we also have free demos on our website, then you will know the quality of our 300-515 training quiz.

Cisco Implementing Cisco Service Provider VPN Services Sample Questions (Q11-Q16):

NEW QUESTION # 11
What is the difference between inter-AS VPN and intra-AS VPN?

A. Inter-AS VPN uses eBGP and MPLS to extend VPN services across ASBRs, and intra-AS VPN uses IBGP, MPLS, and route reflectors to manage VPN routing and label forwarding.
B. Inter-AS VPN mandates a separate VPN instance for each AS, and intra-AS VPN merges all VPN instances into a single global instance.
C. Inter-AS VPN requires cooperation between different autonomous systems to handle label distribution, and intra-AS VPN relies on an internal label-distribution mechanism.
D. Inter-AS VPN uses route reflectors to distribute VPN routes between AS, and intra-AS VPN operates without route reflectors.

Answer: C

Explanation:
Inter-AS VPNs require coordination between two or more autonomous systems so that labels and VPN routes can be exchanged across AS boundaries, typically through ASBRs using eBGP- based mechanisms. In contrast, intra-AS VPNs operate entirely within one autonomous system, where label distribution is handled internally using mechanisms such as LDP or internal BGP signaling without external AS coordination.

NEW QUESTION # 12
Refer to the exhibit.

A network engineer has been called to configure the four PE devices in order to enable full communication among the four CE devices connected to them. While starting to configure, he experienced a connectivity issue. Which two tasks should the engineer perform in order to begin the process correctly? (Choose two.)

A. Configure PE4 to import route-targets 101:1 and 202:2.
B. Configure PE3 to export route-targets 100:1 and 200:2.
C. Configure PE2 to export route-targets 300:3 and 400:4.
D. Configure PE3 to import route-targets 100:1 and 200:2.
E. Configure PE1 to import route-targets 300:3 and 400:4.

Answer: B,D

NEW QUESTION # 13
How is the underlay label managed in L3VPN data plane operations?

A. The label is pushed at the provider edge router and popped at the next provider router.
B. The label is unchanged on provider routers and popped at the egress router.
C. The label is pushed at the ingress LER and remains unchanged through the MPLS label swap process in the network.
D. The label is swapped at each label-switching router in the service provider network.

Answer: D

Explanation:
In an MPLS L3VPN, the ingress PE pushes both the VPN (inner) label and a transport (outer) label. Each MPLS LSR in the SP core examines the top (transport) label, swaps it for its next-hop label via its LFIB, and forwards the packet. Only the egress PE pops the transport label before delivering the packet to the CE.

NEW QUESTION # 14
Refer to the exhibit. The CE router has established a BGP peering with the PE router, and the CE will use the core infrastructure of the PE as a backbone carrier to support CSC.
Which additional task can you perform to complete the configuration?

A. Change the rd value to 65001:65001 under the VRF section of the PE router.
B. Configure the address-family ipv4 labeled-unicast command under the neighbor configuration of the CE router for the PE.
C. Configure static routing on the CE router.
D. Configure OSPF on the PE router.

Answer: B

Explanation:
The scenario describes a Carrier Supporting Carrier (CSC) architecture where the Customer Edge (CE) router needs to exchange both IPv4 routing information and MPLS labels with the Provider Edge (PE) router over an external BGP (eBGP) session.
Looking closely at the configuration in the exhibit:
- On the PE Router, under the VRF BGP neighbor configuration (neighbor 192.168.1.24), the address-family ipv4 labeled-unicast command is applied. This means the PE is fully prepared to send and receive BGP Labeled Unicast (BGP-LU) updates.
- On the CE Router, under address-family ipv4 unicast, it has configured allocate-label all, but it is missing the corresponding activation command under the neighbor statement to actually negotiate labeled unicast capabilities with its peer (neighbor 192.168.1.25).
Without activating the ipv4 labeled-unicast address-family for the neighbor on the CE router, the eBGP session will only exchange standard IPv4 unicast routes, breaking the end-to-end LSP required for CSC.

NEW QUESTION # 15
Refer to the exhibit.

PE1 and PE2 are exchanging VPNv4 routes for CE1 and CE2, and PE3 contains the default route to the internet. If the three devices are operating normally, which two conclusions describe this configuration?
(Choose two.)

A. All three routers must be running a distance-vector routing protocol.
B. Only the CE2 VRF can access the default route provided by the Internet VRF.
C. The CE1 and CE2 VRFs can exchange routes only between their respective VRFs on PE1 and PE2.
D. All three routers must be running MP-BGP.
E. The CE1 and CE2 VRFs can access the default route provided by the Internet VRF.

Answer: C,D

NEW QUESTION # 16
......

A dedicated team is accessible for TestkingPass customers. One can reach our 24/7 customer support team to resolve their queries. Moreover, our team will also assist users if they face any kind of trouble while using above-mentioned formats of 300-515 practice material. We will offer you a refund guarantee (terms and conditions apply) as saving your money is our priority. Additionally, we offer up to 1 year of free updates and free demo of the 300-515 product. Order 300-515 exam questions now and get excellent these offers.

300-515 Reliable Test Experience: https://www.testkingpass.com/300-515-testking-dumps.html

BTW, DOWNLOAD part of TestkingPass 300-515 dumps from Cloud Storage: https://drive.google.com/open?id=1TqYJQb_C0VxGTXyzvwce4Xj8tSojp9ZZ