Our 300-110 learning guide is very efficient tool in the world. As is known to us, in our modern world, everyone is looking for to do things faster, better, smarter, so it is no wonder that productivity hacks are incredibly popular. So we must be aware of the importance of the study tool. In order to promote the learning efficiency of our customers, our 300-110 Training Materials were designed by a lot of experts from our company. Our 300-110 study materials will be very useful for all people to improve their learning efficiency.
| Section | Weight | Objectives |
|---|---|---|
| Wired and Wireless Infrastructure | 30% | - Physical infrastructure requirements - Design high-density wireless networks - Design for data, voice, video, location - Design radio management - Design wireless bridging (mesh) - Logical infrastructure requirements |
| Wireless Site Survey | 25% | - Planning tools and network metrics evaluation - Collect design requirements and evaluate constraints - Layer 1 site survey analysis - Pre-deployment site survey - Predictive site survey - Post-deployment site survey - Material attenuation and its design effects |
| Mobility | 25% | - Design mobility groups - Site Tags - Validate mobility tunneling - Optimize client roaming |
| WLAN High Availability | 20% | - Design controller high availability - Design AP high availability |
Time and tides wait for no man. Take away your satisfied 300-110 preparation quiz and begin your new learning journey. You will benefit a lot after you finish learning our 300-110 study materials just as our other loyal customers. Live in the moment and bravely attempt to totally new things. You will harvest meaningful knowledge as well as the shining 300-110 Certification that so many candidates are dreaming to get.
NEW QUESTION # 119
An engineer in a branch office that does not have a wired backhaul must ensure that local clients can be switched locally and authenticated centrally. In which mode must the AP be configured?
Answer: B
Explanation:
Flex+Bridge mode is a specialized AP operating mode that combines two distinct Cisco wireless capabilities: FlexConnect (for local switching of client data traffic and central authentication via the WLC) and Bridge/Mesh mode (enabling wireless backhaul when no wired Ethernet uplink is available). In a branch environment without wired backhaul, a standard FlexConnect AP (Option D) cannot operate because FlexConnect still requires an Ethernet connection for its control plane.
Bridge mode alone provides mesh backhaul but does not support the local switching with central authentication model required here. MAP (Option A) is a Mesh Access Point role for wireless backhaul, and RAP (Option C) is a Root Access Point with a wired connection -- neither meets the no-wired-backhaul requirement with local switching. Flex+Bridge uniquely satisfies both requirements: the Flex component allows locally switched VLANs to be bridged directly to the access layer without traversing the WAN, while the Bridge component enables the AP to use a wireless mesh link for its backhaul uplink. Central authentication is maintained via the CAPWAP control tunnel over the mesh link.
NEW QUESTION # 120
A network engineer is deploying Cisco 9130I APs on multiple Cisco Catalyst 9800-80 WLCs with Cisco Catalyst Center. The engineer must enable Cisco AI Analytics and location analytics to use the RRM features to automatically manage the WLC RF profiles. Which type of license must be used on Cisco Catalyst Center?
Answer: D
Explanation:
Cisco Catalyst Center ' s AI-driven network management capabilities - including AI Analytics, AI-Enhanced RRM (Radio Resource Management), location analytics (DNA Spaces integration), and automated RF profile management - are exclusively available under the Catalyst Advantage license tier. The Advantage tier builds upon the Essentials tier and adds access to the full suite of AI/ML-powered assurance and optimization features. Specifically, AI-Enhanced RRM leverages machine learning models trained on historical RF telemetry to predict and prevent RF issues, dynamically adjust channel and power assignments, and automate RF profile selection - capabilities that cannot be activated without the Advantage license. Location analytics through Catalyst Center integrates with Cisco Spaces to provide real-time client location tracking, asset tracking, and spatial analytics. Catalyst Essentials (Option C) provides basic device management, software image management, and network plug-and-play provisioning - it does not include AI Analytics or advanced RRM automation. Right-To-Use (Option B) is a legacy licensing model not applicable to Catalyst Center.
SNTC SmartNet (Option D) is a support and maintenance contract, not a software feature license. Reference:
WLSD Study Guide - Cisco Catalyst Center Licensing, AI-Enhanced RRM, Catalyst Advantage Feature Set.
NEW QUESTION # 121
An engineer is designing a point-to-point outdoor bridge link spanning 4 km between two buildings. Which two factors must be calculated during the design? (Choose two.)
Answer: A,C
Explanation:
An outdoor bridge link is fundamentally an RF engineering problem, and two calculations determine whether the link will work. Fresnel zone clearance (Option A) accounts for the ellipsoidal volume around the direct line of sight through which most of the RF energy travels; obstructions intruding into this zone cause diffraction loss even when visual line of sight appears clear. Cisco's design guidance is to maintain at least 60% of the first Fresnel zone free of obstruction, which at 4 km requires meaningful antenna height above terrain, buildings, and tree lines. The link budget (Option C) sums transmit power, antenna gain at both ends, cable and connector losses, and free-space path loss, then compares the result against receiver sensitivity for the desired data rate - with adequate fade margin, typically 10 to 20 dB, to survive rain and multipath. Mobility group names, DHCP scoping, and MTU are network configuration details that do not determine whether the RF link closes.
NEW QUESTION # 122
An engineer configured the optimized client roaming on Cisco WLC with an RSSI threshold of -72 dBm. Clients report frequent disconnections. What must be configured for the AP to guide the client to a better AP?
Answer: B
Explanation:
The scenario presents a critical distinction in where Cisco WLC features are configured.
Optimized roaming on Cisco WLC is a radio-level feature that monitors connected client RSSI and, when a client's signal falls below the configured threshold (-72 dBm), triggers a disassociation to force the client to reconnect to a stronger AP. However, without a mechanism to guide the client proactively before reaching the threshold, clients that disassociate simply reconnect to whatever AP their device selects, potentially causing the reported frequent disconnections. BSS Transition Management (802.11v) is configured at the SSID level and provides the complementary mechanism: before the client reaches the RSSI threshold, the AP sends a BSS Transition Management Request pointing the client toward a specific target AP with stronger signal. The correct architecture requires: optimized roaming configured at the radio level (triggering disconnection when RSSI falls too low) combined with BSS transition enabled at the SSID level (guiding the client to a better AP before forced disconnection).
NEW QUESTION # 123
An engineer is designing a wireless network for a small airport and completes the initial walkthrough phase of the facility. Which step of the WLAN site survey should the engineer perform next?
Answer: A
Explanation:
The Cisco WLAN site survey methodology follows a structured, sequential process. The initial walkthrough -- sometimes called the discovery or orientation phase -- is the first step, during which the engineer physically tours the facility to understand its physical characteristics: building materials, structural layout, potential AP mounting locations, wiring closet positions, and environmental factors. After completing the initial walkthrough, the next logical phase is the predeployment survey (also referred to as a pre-deployment or predictive survey). The predeployment survey uses the information gathered during the walkthrough to create a detailed design plan -- either through a manual AP placement plan or a predictive survey tool such as Ekahau, where floor plans are annotated with materials and attenuation values and APs are virtually placed to model coverage. The predeployment survey output is the design document that drives the actual physical installation.
NEW QUESTION # 124
......
Some people prefer books, some check videos, and some hire online tutors, to clear the 300-110 exam. It all depends on you what you like the most. If you learn better by books, go for it but if you are busy, and don't have much time to consult a list of books for studying, itβs better to get the most probable Designing Cisco Wireless Networks (300-110) exam questions. We are sure that you will learn well and can crack Cisco 300-110 exam easily.
Reliable 300-110 Exam Testking: https://www.verifieddumps.com/300-110-valid-exam-braindumps.html