BONUS!!! Download part of DumpsTorrent JN0-364 dumps for free: https://drive.google.com/open?id=131KzuhJu7_W6VeIJXbk0YEzqpd8ynZAF
Our JN0-364 useful test guide materials present the most important information to the clients in the simplest way so our clients need little time and energy to learn our JN0-364 useful test guide. The clients only need 20-30 hours to learn and prepare for the test. For those people who are busy in their jobs, learning or other things this is a good news because they needn't worry too much that they don't have enough time to prepare for the test and can leisurely do their main things and spare little time to learn our JN0-364 study practice guide. So it is a great advantage of our JN0-364 exam materials and a great convenience for the clients.
| Section | Objectives |
|---|---|
| Topic 1: OSPF and IS-IS Routing Protocols | - OSPF configuration and troubleshooting
|
| Topic 2: Troubleshooting and Operations | - Network troubleshooting methodology
|
| Topic 3: MPLS and Service Provider Technologies | - MPLS fundamentals
|
| Topic 4: Service Provider Architecture & Junos Fundamentals | - Service provider network design basics
|
| Topic 5: BGP and Routing Policy | - BGP fundamentals
|
>> Real Juniper JN0-364 Question <<
In order to protect the vital interests of each IT certification exams candidate, DumpsTorrent provides high-quality Juniper JN0-364 Exam Training materials. This exam material is specially developed according to the needs of the candidates. It is researched by the IT experts of DumpsTorrent. Their struggle is not just to help you pass the exam, but also in order to let you have a better tomorrow.
NEW QUESTION # 39
Referring to the exhibit, which two statements are correct? (Choose two.)
Answer: A,D
Explanation:
In IS-IS, Level 1 routes are usually contained within the same area and Level 2 routes are used to interconnect different areas. By default, routes from Level 1 are redistributed into Level 2, and vice versa, to ensure reachability between areas.
By default, IS-IS protocol leaks routing information from a Level 1 area to a Level 2 area.
However, to leak routing information from a Level 2 area to a Level 1 area, an export policy must be explicitly configured.
NEW QUESTION # 40
Click the Exhibit button. Referring to the exhibit, which two statements are true? (Choose two.)
Answer: B,D
Explanation:
The configuration places the interface in VLAN membership for VLAN ID 10, meaning it is part of the VLAN that uses VLAN ID 10. With ethernet-switching and VLAN membership specified, the port expects frames associated with that VLAN, which are carried as tagged frames for that VLAN.
NEW QUESTION # 41
Which two statements ate correct about the community BGP attribute on a Junos device?
(Choose two.)
Answer: B,D
Explanation:
The community attribute in BGP is an optional transitive attribute. It is not mandatory for BGP operations, but when it is present, it should be passed unchanged to other BGP peers unless explicitly modified by a routing policy. The community attribute is used to group destinations in a certain way, often to apply routing policies to those destinations collectively.
NEW QUESTION # 42
Referring to the exhibit, from which device(s) does R3 learn about Route X?
Answer: D
Explanation:
R2 can not forward IBGP learned routes to another IBGP neighbor correct R3 will learn about Route X from R2 only. R1 is in a separate AS and Route X is advertised to R2 through eBGP. R2 will then advertise the route to R3 using iBGP. R3 cannot learn routes directly from another AS without having a direct eBGP session with that AS.
NEW QUESTION # 43
Exhibit:
user@Router-1> show route 172.24/16
inet.0: 9 destinations, 9 routes (9 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
...
172.24.0.0/24 *[OSPF/150] 01:31:31, metric 0, tag 0
> to 172.20.0.2 via ge-0/0/2.0
to 172.20.1.2 via ge-0/0/3.0
user@Router-1> show route forwarding-table
Routing table: default.inet
Internet:
Destination Type RtRef Next hop Type Index NhRef Netif
...
172.24.0.0/24 user 0
172.20.0.2 ucst 551 2 ge-0/0/2.0
172.20.1.2 ucst 552 2 ge-0/0/3.0
Referring to the exhibit, which two statements are true? (Choose two.)
Answer: C,D
Explanation:
In Junos OS, understanding the distinction between theRouting Information Base (RIB)and theForwarding Information Base (FIB)is fundamental to analyzing traffic patterns and load-balancing behavior. The RIB (show route) contains all prefixes learned via various protocols, while the FIB (show route forwarding-table) contains only the active next-hops that are actually programmed into the Packet Forwarding Engine (PFE).
According to Juniper Networks technical documentation, the default behavior for Junos OS when encounteringEqual-Cost Multipath (ECMP)routes is to select only a single next-hop from the available candidates in the RIB and install that single path into the FIB. In a default state, even if the show route output displays multiple next-hops for a destination like 172.24.0.0/24, only one would have the active route symbol (
>) and only that one would appear in the forwarding table.
In the provided exhibit, the show route output shows two next-hops for 172.24.0.0/24, but only the first one (172.20.0.2) is marked with the>symbol as the active selection. However, the subsequent show route forwarding-table output reveals thatboth next-hops(172.20.0.2 and 172.20.1.2) are currently present in the forwarding table for that same destination. This discrepancy indicates that thedefault load-balancing behavior has been modified (Option B). This modification is typically achieved by creating a routing policy with the action then load-balance per-packet (which actually results in flow-based load balancing) and applying it to the forwarding table via the export statement under [edit routing-options forwarding-table].
Because the forwarding table now contains both next-hops, the router is no longer restricted to a single path.
Therefore, therouter will choose both next-hops in the routing table (Option D)for packet forwarding, distributing flows across the two available Gigabit Ethernet interfaces (ge-0/0/2.0 and ge-0/0/3.0). This ensures higher utilized bandwidth and provides redundancy at the data plane level.
NEW QUESTION # 44
......
Maybe you have desired the JN0-364 certification for a long time but don't have time or good methods to study. Maybe you always thought study was too boring for you. Our JN0-364 study materials will change your mind. With our products, you will soon feel the happiness of study. Thanks to our diligent experts, wonderful study tools are invented for you to pass the JN0-364 Exam. You can try the demos first and find that you just can't stop studying if you use our JN0-364 training guide.
JN0-364 Study Group: https://www.dumpstorrent.com/JN0-364-exam-dumps-torrent.html
What's more, part of that DumpsTorrent JN0-364 dumps now are free: https://drive.google.com/open?id=131KzuhJu7_W6VeIJXbk0YEzqpd8ynZAF